Tender For Replacement Of Damaged Lighting Luminaries At Kalyaneswari U Park,Lagoon Area, At Kalyaneswari Headworks Site Under Rcfa Part-I Water Supply Scheme.
Tender Value
6.54 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
8 days left
EMD
13085
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Paschim Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Damaged Lighting Luminaries At Kalyaneswari U Park,Lagoon Area, At Kalyaneswari Headworks Site Under Rcfa Part-I Water Supply Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | Supply & delivery of 3 Pole, 18 Amp, AC-3 Duty power contactor with 1 No auxiliary contact, coil voltage-220-240 V, AC.. |
| 2 | Supply & delivery of Digital time switch with 110 - 240 VAC 1 C/O Base/DIN 25 ON/OFF Each. |
| 3 | Atfirst removing damaged time switches, power contactor etc from the outdoor & indoor yard lighting panel then fitting, fixing new one, also doing all necessary connections, work should be done by skilled electrician. |
| 4 | Dismantling and lowering of the outdoor lighting luminaries from the top of the pole as well as outside of pump house and OHR by using of scaffolding arrangement after disconnection of electrical connection etc as per direction. |
| 5 | 90 Watt. LED Highly efficient IP-65 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution, higher spacing between poles and maintenance-free system with 9000 lumen output.(Make:-Approved Make) |
| 6 | 35 Watt. LED Highly efficient IP-65 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution, higher spacing between poles and maintenance-free system with 3500 lumen output.(Make:-Approved Make) |
| 7 | 4 ft. long 22 Watt LED Tubelight Slim LED batten with aluminium housing and polycarbonate diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantlydesigned end caps with 2200 lumen output.(Make:-Approved Make) |
| 8 | 3 CoreX 1.5 Sqmm industrial flexible copper cable wire/dia-30/0.25 PVC insulated with PVC sheathed as per IS:694.(Make:Approved Make) |
| 9 | 20 Watt LED Bulb with 2000 lumen output.(Make:-Approved make) |
| 10 | 9 Watt LED Bulb with 825 lumen output.(Make:-Approved make) |
| 11 | Fitting & fixing of the indoor lighting luminaries along with new & old accessories to the pole etc as per direction of EIC. |
| 12 | Fixing only Single LED Batten light fitting complete with all accessories directly on wall by screws etc. |
| 13 | Fitting & fixing of the outdoor lighting luminaries along with new & old accessories to the pole and sub-station building etc as per direction of EIC. |
| 14 | Supply of 450 mm Sweep exhaust fan 220V-240 V,50 Hz, Single phase.(Make:-Approved Make). |
| 15 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:45 cm (18\\"). |
| 16 | 4 Core X 10 Sqmm, 1.1 KV Grade XLPE insulated Al.Ar Cable.( From DBs to Pole to Pole)(Make:-Approved Make)(Extra cable stored at site) |
| 17 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.(From Panel Outgoing to Pole to Pole) |
| 18 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :4 core 10 sqmm cable. |
| 19 | Straigh through Jointing of cable of different size by compound jointing kit including S&F ferrul, tapes and jointing materials(Brand approved by EIC)-4 Core X 10 Sqmm. |
| 20 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint.Upto 9.0 mtr. long pole.(i) 1st coat of aluminium paint over 1 coat of RO priming. |
| 21 | (ii) 2nd coat of aluminium paint over 1st coat. |
| 22 | Add GST @ 18% |
| 23 | Add CESS @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender