Tender For Rewinding And Overhauling Of 40 Hp Submersible Pump-Motor Set, Lt Pdb Cum Mcc Panel Repairing At Madanpur Head Works Under Rcfa Part-Ii Water Supply Scheme.
Tender Value
2.95 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
6 days left
EMD
5920
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rewinding And Overhauling Of 40 Hp Submersible Pump-Motor Set, Lt Pdb Cum Mcc Panel Repairing At Madanpur Head Works Under Rcfa Part-Ii Water Supply Scheme.
BOQ
| Sl. No. | Item Description |
| 1 | 40 HP Centrifugal Pump Starter repairing portion:- |
| 2 | Electronic over current relay, relay range from 5.0-80 Amp, with over current, under current, phase loss, phase imbalance, phase reversal, locked Rotor protection, 3 Phase, 415 V AC, 50 Hz, control voltage-100-240 V AC.(Make:-BCH, Model No- MP353DE80DZ4) |
| 3 | Atfirst removing damaged electronic over current relay from the existing starter then fitting, fixing the new one, making functional all parameters/Tripping operation of perform as per direction. |
| 4 | Flowmeter repairing portion:- |
| 5 | Microprocessor based card repairing. |
| 6 | SMPS power line card repairing. |
| 7 | Atfirst removing damaged microprocessor based PCB and power card from the display unit then fitting, fixing of repaired card at the same place, ensuring all measurements functional properly, as per direction. |
| 8 | 80 KVA Voltage stabilizer repairing portion:- |
| 9 | Digital 3 phase control card. |
| 10 | Wiring and accessories. |
| 11 | Atfirst removing damaged digital control card from the operating unit then fitting, fixing of repaired card at the same place, ensuring all measurements functional properly, as per direction. |
| 12 | 1 KVA Servo Voltage stabilizer:- |
| 13 | Control card. |
| 14 | Driver transformer. |
| 15 | Atfirst removing damaged control card & driver transformer from the stabilizer control circuit, then fitting, fixing the same as per direction, also ensuring the all are functioning well. |
| 16 | Finishing the end of following XLPE/PVC armoured cables bycrimping method incl. supplying and fixing solderless socket(Dowels make), tapes, anticorrosive paste & jointing material:- 3.5 Core X 95 Sqmm. |
| 17 | Yard lighting portion:- |
| 18 | Dismantling and lowering of the outdoor lighting luminaries from the top of the pole as well as outside of pump house and OHR by using of scaffolding arrangement after disconnection of electrical connection etc as per direction. |
| 19 | 70 Watt. LED Highly efficient IP66 LED street-light with aluminium pressure die-cast housing, toughened glass in the front and peanut lens for batwing light distribution,higher spacing between poles and maintenance-free system.(Make-Approved Make) |
| 20 | Fitting & fixing of the outdoor lighting luminaries along with new & old accessories to the pole and sub-station building etc as per direction of EIC. |
| 21 | 50 Amp, connection terminal for pole mounting box.(Make:-Kothari/Other approved make) |
| 22 | Painting of Steel Tubular Pole of lengths and no. of coats of paint,as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint, above 9.0 mtr long pole. |
| 23 | (i) 1st coat of aluminium paint over 1 coat of RO priming. |
| 24 | (ii) 2nd coat of aluminium paint over 1st coat. |
| 25 | 4 Core X 10 Sqmm Al.Ar. Cable , XLPE Insulated 1.1 KV Grade conforming to IS 7098(I). |
| 26 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed-4 Core X 10 Sqmm. |
| 27 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :-4 Core X 10 Sqmm. |
| 28 | 3.5 Core X 95 Sqmm Al.Ar. Cable, XLPE Insulated 1.1 KV Grade conforming to IS:7098(I).(Make:-Gloster/Polycab/Other approved make) |
| 29 | Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. |
| 30 | Laying of one No. cable above 35 sqmm and upto 185 sqmm in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoringsurface duly rammed. |
| 31 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :- 3.5 Core X 95 Sqmm. |
| 32 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :- 3.5 Core X 95 Sqmm. |
| 33 | Add GST @ 18% |
| 34 | Add CESS @ 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender