Public Administrative Department Government Departments Closing in 16 days TDR #58401921

Bids Are invited for Upha Development Works At Anjengo Fort At Anjnego Thiruvananthapuram Dist Keralam

Issued by Government Departments · Thiruvananthapuram, Kerala
Tender Value
12.80 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
16 days left
EMD
25605
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Available
Quantity
2281

Project Description

Bids Are invited for Increasing The Height Of The Existing Laterite Stone Compound Wall - Increasing The Height Of The Existing Laterite Stone Compound Wall On The Northern Side Of The Monument For The Safety And Protection Of The Monument, Using Approved Laterite Stones Of Required Size Laid In Lime Mortar, Using Lime Mortar 1 2, Including Fixing And Finishing To Match The Existing Old Construction, Including All Materials, Labour, Curing, And Finishing, Complete As Directed By The Engineer In Charge. , Providing Pointing To The Laterite Stone Masonry - Providing Pointing To The Laterite Stone Masonry Of The Existing Compound Wall With Approved Lime Mortar 1 2, After Proper Cleaning, And Providing Coping On Top Of The Wall As Per The Original Construction, Using Lime Mortar 1 2, Including Proper Formation, Finishing And Matching With The Existing Old Construction, Including All Materials, Labour, Scaffolding And Necessary Tools And Tackles, Complete As Directed By The Engineer In Charge. , Removing Existing Damaged Or Rusted Ms Grills And Providing, Fabricating And Fixing New Ms Grills - Removing Existing Damaged Or Rusted Ms Grills And Providing, Fabricating And Fixing New Ms Grills Of Approved Design, Including Ms Sections, Welding, Cutting, Grinding, Drilling And Fixing, With Suitable Primer And Two Coats Of Approved Synthetic Enamel Paint, Complete With All Materials, Labour And Incidental Works.As Per Drawing , Direction Sign Board - Providing, Fabricating, Supplying And Fixing Freestanding Direction Sign Board Comprising Ss 304 Grade 75 X 75 X 2 Mm Shs Post, 150X150x10 Mm Ss 304 Base Plate, 4 Nos. M12 Ss Anchor Fasteners And Pcc 1 4 8 Foundation Of 450X450x300 Mm, With 25X25x1.6 Mm Ss 304 Frame And 4 Mm Acp Panel, High-Intensity Retro Reflective Vinyl Graphics, Complete With Satin Or Hairline Finish, Fixing, Erection And All Incidental Works. , Dismantling And Removing The Existing Damaged And Rusted Ms Gate And Providing, Making, Supplying And Fixing A New Wooden Gate - Dismantling And Removing The Existing Damaged And Rusted Ms Gate At The Northern Side, Including Cutting, Dismantling, Removal And Disposal Of The Dismantled Materials As Directed And Providing, Making, Supplying And Fixing A New Wooden Gate Of Approved Design And Dimensions, Using Good Quality Seasoned And Preservative Treated Teakwood Of Approved Quality For Frames, Shutters And Pickets, Including Cutting, Planning, Shaping And Assembling, Complete With Necessary Wooden Frame, Shutters, Hinges, Bolts, Aldrops, Handles, Locking Arrangements And Other Required Fixtures And Hardware, Including All Necessary Cutting, Fitting, Fixing And Finishing Applying Suitable Preservative Treatment, Primer And Approved Paint Or Polish Finish As Specified, Including Transportation, Loading, Unloading, Labour, Tools, Tackles And All Incidental Works, Complete As Directed By The Engineer In Charge. As Per Drawing , Removing The Existing Damaged And Rusted Railing And Providing, Fabricating, Supplying And Fixing New Ms Hand Railing - Removing The Existing Damaged And Rusted Railing At The South Eastern Side Inside The Monument, Including Dismantling And Disposal Of The Dismantled Materials, And Providing, Fabricating, Supplying And Fixing New Ms Hand Railing To The Steps From Ground Level To The Rampart Top Using Ms Pipes Of Approved Diameter And Thickness, Including Necessary Posts, Horizontal Or Vertical Members, Bends, Welding, Cutting, Grinding, Fixing, Suitable Primer And Two Coats Of Approved Synthetic Enamel Paint, Complete With All Fittings, Labour, Tools, Tackles And Incidental Works As Directed By The Engineer In Charge. As Per The Drawing , Dismantling And Carefully Removing The Existing Damaged And Undulated Laterite Stone Pathway And Carefully Resetting Or Relaying The Laterite Stones - Dismantling And Carefully Removing The Existing Damaged And Undulated Laterite Stone Pathway On The Northern Side Near The Toilet Of The Monument, Including Careful Removal And Stacking Of Reusable Laterite Stones, Disposal Of Unusable Debris At A Suitable Location Away From The Monument, Preparation, Dressing And Levelling Of The Existing Base, Providing Suitable Bedding Wherever Required, And Carefully Resetting Or Relaying The Laterite Stones To Proper Line, Level And Slope For Effective Drainage, Using Approximately 80 Percentage New And 20 Percentage Sound Reusable Old Laterite Stones Of Size 30 X 20 X 20 Cm, Laid In Cement Mortar 1 3, Including Filling And Pointing Of Joints With Cement Mortar And Neat Finishing With Colour Matching To The Existing Surface, Cleaning And Finishing The Completed Surface, And All Necessary Materials, Labour, Tools, Tackles, Transportation, Disposal Charges And Incidental Works, Complete As Directed By The Engineer In Charge. , Providing A New Laterite Stone Pathway - Providing A New Laterite Stone Of Size 30 X 20 X 20 Cm Pathway Connecting To The Tombstone, Including Excavation And Preparation Of Ground, Levelling And Dressing, Providing Suitable Base Or Bedding, Supplying And Laying Laterite Stone Blocks Of Approved Size And Thickness To Proper Line, Level And Slope, Including Joint Filling, Dressing, Cleaning, Transportation, Labour, Tools, Tackles And All Incidental Works, Complete As Directed By The Engineer In Charge , Recess Pointing To The Apron Or Pathway - Recess Pointing To The Apron Or Pathway Using Lime Mortar In The Proportion Of 1 1 1, Including Neat Finishing, Matching With The Existing Surface, Curing And All Incidental Works, Complete. , Providing, Fabricating, Supplying And Fixing Visitor Information Or Interpretation Board - Providing, Fabricating, Supplying And Fixing Visitor Information Or Interpretation Board Of Approved Design And Dimensions, Comprising Suitable Ss 304 Grade Stainless Steel Supporting Frame And Posts, Duly Welded, Ground Smooth And Finished With Satin Or Hairline Finish, Securely Fixed To The Ground With Suitable Stainless Steel Base Plates, Anchor Fasteners And Pcc Foundation, Including Excavation, Backfilling And Disposal Of Surplus Earth. The Information Panel Shall Consist Of 4 Mm Thick Aluminium Composite Panel Of Approved Colour And Finish, Securely Fixed To The Frame Using Stainless Steel Screws And Provided With High Quality Uv Resistant Outdoor Grade Digitally Printed Graphics, Text, Photographs, Monument History, Significance, Visitor Information And Other Approved Content. The Printed Surface Shall Be Suitably Protected With Uv Resistant Outdoor Grade Protective Lamination Or Finish, Complete With All Necessary Fittings, Fixtures, Printing, Lettering, Graphics, Welding, Polishing, Transportation, Erection, Alignment, Labour, Tools, Tackles And All Incidental Works, Complete In All Respects As Directed By The Engineer-In Charge. As Per Drawing , Roviding, Supplying And Fixing Pole Mounted Stainless Steel 304 Grade Dustbin - Providing, Supplying And Fixing Pole Mounted Stainless Steel 304 Grade Dustbin Comprising 2 Nos. Cylindrical Bins Of 50 Litre Capacity Each, Mounted On 3 Nos. Stainless Steel Poles With Stand, Fabricated Entirely From Stainless Steel Grade 304. The Poles Shall Be Of 29 To 32 Mm Diameter, 1000 To 1099 Mm Height And 1.0 Mm Pipe Thickness, With Dustbin Container Wall Thickness Of 0.5 Mm. The Bins Shall Be Perforated, Provided With Swing Type Lids Or Containers, With Approximately 15 Cm Ground Clearance From Pole Stand To Bottom Sheet Of Dustbin, Including All Necessary Fixing Accessories, Complete In All Respects , Supply And Fixing Of Approved Design Granite Stone Benches - Supply And Fixing Of Approved Design Granite Stone Benches Of Size 200 X 60 X 80 Cm, Two Numbers, With Backrest, Including Cost Of Granite Stone, Transportation, Cutting, Shaping, Moulding And Polishing To The Required Design, Earthwork Excavation, Pcc Or Rcc For Foundation And Pedestal, Fixing In Position With Necessary Cement Mortar, And All Labour, Materials, Tools And Tackles, Etc., Complete As Directed By The Engineer In Charge. , Providing And Fixing New Gi Post And Chain Fencing Around The Tombstone - Providing And Fixing New Gi Post And Chain Fencing Around The Tombstone, Including Dismantling And Removal Of Existing Fencing, Gi Posts, 6 Mm Gi Chain With Additional Length For Loose Or Curved Arrangement, Decorative Caps, Fixing Accessories, Anchoring Or Pcc Foundations Wherever Required, Labour, Transportation, Tools And Incidental Works, Complete , 4 Mp Fixed Network Colour Camera - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, Comprising Suitable Outdoor-Rated Cctv Cameras Of Approved Specification, Mounting Brackets, Necessary Cabling, Conduits, Connectors, Power Supply Arrangements And All Required Accessories, Integrated With The Existing Cctv Surveillance System Wherever Feasible, Including Mounting, Cable Laying, Termination, Configuration, Testing And Commissioning, Complete With All Materials, Labour, Tools, Tackles And Incidental Works As Directed By The Engineer In Charge , Poe Port Switch Gaga 8 X Gigabit Poe Port 1X Gigabit - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , D Link Cat 6 Cable - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Optical Fibre 12 Core - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , 3 Core Power Cable - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Power Socket And Switch - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Sintex Box Or Junction Box - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Camera Housing Box - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Gi Pipe 4 Inch 20 Feet - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Gi Pipe 3 Inch 20 Feet Conduit And Accessories - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Pvc Pipe Conduit And Accessories - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Labour Charges Or Service Charges - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security,

BOQ

Sl. No. Item TitleItem Description
1Increasing the height of the existing laterite stone compound wallIncreasing the height of the existing laterite stone compound wall on the northern side of the monument for the safety and protection of the monument, using approved laterite stones of required size laid in lime mortar, using lime mortar 1 2, including fixing and finishing to match the existing old construction, including all materials, labour, curing, and finishing, complete as directed by the Engineer in Charge.
2Providing pointing to the laterite stone masonryProviding pointing to the laterite stone masonry of the existing compound wall with approved lime mortar 1 2, after proper cleaning, and providing coping on top of the wall as per the original construction, using lime mortar 1 2, including proper formation, finishing and matching with the existing old construction, including all materials, labour, scaffolding and necessary tools and tackles, complete as directed by the Engineer in Charge.
3Removing existing damaged or rusted MS grills and providing, fabricating and fixing new MS grillsRemoving existing damaged or rusted MS grills and providing, fabricating and fixing new MS grills of approved design, including MS sections, welding, cutting, grinding, drilling and fixing, with suitable primer and two coats of approved synthetic enamel paint, complete with all materials, labour and incidental works.as per drawing
4Direction Sign BoardProviding, fabricating, supplying and fixing freestanding Direction Sign Board comprising SS 304 grade 75 X 75 X 2 mm SHS post, 150X150X10 mm SS 304 base plate, 4 Nos. M12 SS anchor fasteners and PCC 1 4 8 foundation of 450X450X300 mm, with 25X25X1.6 mm SS 304 frame and 4 mm ACP panel, high-intensity retro reflective vinyl graphics, complete with satin or hairline finish, fixing, erection and all incidental works.
5Dismantling and removing the existing damaged and rusted MS gate and providing, making, supplying and fixing a new wooden gateDismantling and removing the existing damaged and rusted MS gate at the northern side, including cutting, dismantling, removal and disposal of the dismantled materials as directed and providing, making, supplying and fixing a new wooden gate of approved design and dimensions, using good quality seasoned and preservative treated teakwood of approved quality for frames, shutters and pickets, including cutting, planning, shaping and assembling, complete with necessary wooden frame, shutters, hinges, bolts, aldrops, handles, locking arrangements and other required fixtures and hardware, including all necessary cutting, fitting, fixing and finishing applying suitable preservative treatment, primer and approved paint or polish finish as specified, including transportation, loading, unloading, labour, tools, tackles and all incidental works, complete as directed by the Engineer in Charge. As per drawing
6Removing the existing damaged and rusted railing and providing, fabricating, supplying and fixing new MS hand railingRemoving the existing damaged and rusted railing at the south eastern side inside the monument, including dismantling and disposal of the dismantled materials, and providing, fabricating, supplying and fixing new MS hand railing to the steps from ground level to the rampart top using MS pipes of approved diameter and thickness, including necessary posts, horizontal or vertical members, bends, welding, cutting, grinding, fixing, suitable primer and two coats of approved synthetic enamel paint, complete with all fittings, labour, tools, tackles and incidental works as directed by the Engineer in Charge. as per the drawing
7Dismantling and carefully removing the existing damaged and undulated laterite stone pathway and carefully resetting or relaying the laterite stonesDismantling and carefully removing the existing damaged and undulated laterite stone pathway on the northern side near the toilet of the monument, including careful removal and stacking of reusable laterite stones, disposal of unusable debris at a suitable location away from the monument, preparation, dressing and levelling of the existing base, providing suitable bedding wherever required, and carefully resetting or relaying the laterite stones to proper line, level and slope for effective drainage, using approximately 80 percentage new and 20 percentage sound reusable old laterite stones of size 30 x 20 x 20 cm, laid in cement mortar 1 3, including filling and pointing of joints with cement mortar and neat finishing with colour matching to the existing surface, cleaning and finishing the completed surface, and all necessary materials, labour, tools, tackles, transportation, disposal charges and incidental works, complete as directed by the Engineer in Charge.
8Providing a new laterite stone pathwayProviding a new laterite stone of size 30 x 20 x 20 cm pathway connecting to the tombstone, including excavation and preparation of ground, levelling and dressing, providing suitable base or bedding, supplying and laying laterite stone blocks of approved size and thickness to proper line, level and slope, including joint filling, dressing, cleaning, transportation, labour, tools, tackles and all incidental works, complete as directed by the Engineer in Charge
9Recess pointing to the apron or PathwayRecess pointing to the apron or Pathway using lime mortar in the proportion of 1 1 1, including neat finishing, matching with the existing surface, curing and all incidental works, complete.
10Providing, fabricating, supplying and fixing Visitor Information or Interpretation BoardProviding, fabricating, supplying and fixing Visitor Information or Interpretation Board of approved design and dimensions, comprising suitable SS 304 grade stainless steel supporting frame and posts, duly welded, ground smooth and finished with satin or hairline finish, securely fixed to the ground with suitable stainless steel base plates, anchor fasteners and PCC foundation, including excavation, backfilling and disposal of surplus earth. The information panel shall consist of 4 mm thick Aluminium Composite Panel of approved colour and finish, securely fixed to the frame using stainless steel screws and provided with high quality UV resistant outdoor grade digitally printed graphics, text, photographs, monument history, significance, visitor information and other approved content. The printed surface shall be suitably protected with UV resistant outdoor grade protective lamination or finish, complete with all necessary fittings, fixtures, printing, lettering, graphics, welding, polishing, transportation, erection, alignment, labour, tools, tackles and all incidental works, complete in all respects as directed by the Engineer-in Charge. As per drawing
11roviding, supplying and fixing Pole Mounted Stainless Steel 304 grade DustbinProviding, supplying and fixing Pole Mounted Stainless Steel 304 grade Dustbin comprising 2 Nos. cylindrical bins of 50 litre capacity each, mounted on 3 Nos. stainless steel poles with stand, fabricated entirely from Stainless Steel Grade 304. The poles shall be of 29 to 32 mm diameter, 1000 to 1099 mm height and 1.0 mm pipe thickness, with dustbin container wall thickness of 0.5 mm. The bins shall be perforated, provided with swing type lids or containers, with approximately 15 cm ground clearance from pole stand to bottom sheet of dustbin, including all necessary fixing accessories, complete in all respects
12Supply and fixing of approved design granite stone benchesSupply and fixing of approved design granite stone benches of size 200 x 60 x 80 cm, two numbers, with backrest, including cost of granite stone, transportation, cutting, shaping, moulding and polishing to the required design, earthwork excavation, PCC or RCC for foundation and pedestal, fixing in position with necessary cement mortar, and all labour, materials, tools and tackles, etc., complete as directed by the Engineer in Charge.
13Providing and fixing new GI post and chain fencing around the tombstoneProviding and fixing new GI post and chain fencing around the tombstone, including dismantling and removal of existing fencing, GI posts, 6 mm GI chain with additional length for loose or curved arrangement, decorative caps, fixing accessories, anchoring or PCC foundations wherever required, labour, transportation, tools and incidental works, complete
144 MP Fixed Network Colour cameraProviding, supplying, installing, testing and commissioning additional CCTV camera surveillance system at the monument for enhancing security, comprising suitable outdoor-rated CCTV cameras of approved specification, mounting brackets, necessary cabling, conduits, connectors, power supply arrangements and all required accessories, integrated with the existing CCTV surveillance system wherever feasible, including mounting, cable laying, termination, configuration, testing and commissioning, complete with all materials, labour, tools, tackles and incidental works as directed by the Engineer in Charge
15POE Port Switch Gaga 8 x Gigabit POE port 1x GigabitProviding, supplying, installing, testing and commissioning additional CCTV camera surveillance system at the monument for enhancing security,
16D link Cat 6 CableProviding, supplying, installing, testing and commissioning additional CCTV camera surveillance system at the monument for enhancing security,
17Optical Fibre 12 CoreProviding, supplying, installing, testing and commissioning additional CCTV camera surveillance system at the monument for enhancing security,
183 Core Power cableProviding, supplying, installing, testing and commissioning additional CCTV camera surveillance system at the monument for enhancing security,
19Power Socket and switchProviding, supplying, installing, testing and commissioning additional CCTV camera surveillance system at the monument for enhancing security,
20Sintex box or Junction boxProviding, supplying, installing, testing and commissioning additional CCTV camera surveillance system at the monument for enhancing security,
21Camera Housing boxProviding, supplying, installing, testing and commissioning additional CCTV camera surveillance system at the monument for enhancing security,
22GI Pipe 4 inch 20 feetProviding, supplying, installing, testing and commissioning additional CCTV camera surveillance system at the monument for enhancing security,
23GI Pipe 3 inch 20 feet Conduit and accessoriesProviding, supplying, installing, testing and commissioning additional CCTV camera surveillance system at the monument for enhancing security,
24PVC Pipe Conduit and accessoriesProviding, supplying, installing, testing and commissioning additional CCTV camera surveillance system at the monument for enhancing security,
25Labour charges or Service chargesProviding, supplying, installing, testing and commissioning additional CCTV camera surveillance system at the monument for enhancing security,

AI Tender Summary

OUR REF NO 58401921
AUTHORITY Government Departments
TENDER VALUE 12.80 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Archaeological Survey Of India
Work Description Bids Are invited for Increasing The Height Of The Existing Laterite Stone Compound Wall - Increasing The Height Of The Existing Laterite Stone Compound Wall On The Northern Side Of The Monument For The Safety And Protection Of The Monument, Using Approved Laterite Stones Of Required Size Laid In Lime Mortar, Using Lime Mortar 1 2, Including Fixing And Finishing To Match The Existing Old Construction, Including All Materials, Labour, Curing, And Finishing, Complete As Directed By The Engineer In Charge. , Providing Pointing To The Laterite Stone Masonry - Providing Pointing To The Laterite Stone Masonry Of The Existing Compound Wall With Approved Lime Mortar 1 2, After Proper Cleaning, And Providing Coping On Top Of The Wall As Per The Original Construction, Using Lime Mortar 1 2, Including Proper Formation, Finishing And Matching With The Existing Old Construction, Including All Materials, Labour, Scaffolding And Necessary Tools And Tackles, Complete As Directed By The Engineer In Charge. , Removing Existing Damaged Or Rusted Ms Grills And Providing, Fabricating And Fixing New Ms Grills - Removing Existing Damaged Or Rusted Ms Grills And Providing, Fabricating And Fixing New Ms Grills Of Approved Design, Including Ms Sections, Welding, Cutting, Grinding, Drilling And Fixing, With Suitable Primer And Two Coats Of Approved Synthetic Enamel Paint, Complete With All Materials, Labour And Incidental Works.As Per Drawing , Direction Sign Board - Providing, Fabricating, Supplying And Fixing Freestanding Direction Sign Board Comprising Ss 304 Grade 75 X 75 X 2 Mm Shs Post, 150X150x10 Mm Ss 304 Base Plate, 4 Nos. M12 Ss Anchor Fasteners And Pcc 1 4 8 Foundation Of 450X450x300 Mm, With 25X25x1.6 Mm Ss 304 Frame And 4 Mm Acp Panel, High-Intensity Retro Reflective Vinyl Graphics, Complete With Satin Or Hairline Finish, Fixing, Erection And All Incidental Works. , Dismantling And Removing The Existing Damaged And Rusted Ms Gate And Providing, Making, Supplying And Fixing A New Wooden Gate - Dismantling And Removing The Existing Damaged And Rusted Ms Gate At The Northern Side, Including Cutting, Dismantling, Removal And Disposal Of The Dismantled Materials As Directed And Providing, Making, Supplying And Fixing A New Wooden Gate Of Approved Design And Dimensions, Using Good Quality Seasoned And Preservative Treated Teakwood Of Approved Quality For Frames, Shutters And Pickets, Including Cutting, Planning, Shaping And Assembling, Complete With Necessary Wooden Frame, Shutters, Hinges, Bolts, Aldrops, Handles, Locking Arrangements And Other Required Fixtures And Hardware, Including All Necessary Cutting, Fitting, Fixing And Finishing Applying Suitable Preservative Treatment, Primer And Approved Paint Or Polish Finish As Specified, Including Transportation, Loading, Unloading, Labour, Tools, Tackles And All Incidental Works, Complete As Directed By The Engineer In Charge. As Per Drawing , Removing The Existing Damaged And Rusted Railing And Providing, Fabricating, Supplying And Fixing New Ms Hand Railing - Removing The Existing Damaged And Rusted Railing At The South Eastern Side Inside The Monument, Including Dismantling And Disposal Of The Dismantled Materials, And Providing, Fabricating, Supplying And Fixing New Ms Hand Railing To The Steps From Ground Level To The Rampart Top Using Ms Pipes Of Approved Diameter And Thickness, Including Necessary Posts, Horizontal Or Vertical Members, Bends, Welding, Cutting, Grinding, Fixing, Suitable Primer And Two Coats Of Approved Synthetic Enamel Paint, Complete With All Fittings, Labour, Tools, Tackles And Incidental Works As Directed By The Engineer In Charge. As Per The Drawing , Dismantling And Carefully Removing The Existing Damaged And Undulated Laterite Stone Pathway And Carefully Resetting Or Relaying The Laterite Stones - Dismantling And Carefully Removing The Existing Damaged And Undulated Laterite Stone Pathway On The Northern Side Near The Toilet Of The Monument, Including Careful Removal And Stacking Of Reusable Laterite Stones, Disposal Of Unusable Debris At A Suitable Location Away From The Monument, Preparation, Dressing And Levelling Of The Existing Base, Providing Suitable Bedding Wherever Required, And Carefully Resetting Or Relaying The Laterite Stones To Proper Line, Level And Slope For Effective Drainage, Using Approximately 80 Percentage New And 20 Percentage Sound Reusable Old Laterite Stones Of Size 30 X 20 X 20 Cm, Laid In Cement Mortar 1 3, Including Filling And Pointing Of Joints With Cement Mortar And Neat Finishing With Colour Matching To The Existing Surface, Cleaning And Finishing The Completed Surface, And All Necessary Materials, Labour, Tools, Tackles, Transportation, Disposal Charges And Incidental Works, Complete As Directed By The Engineer In Charge. , Providing A New Laterite Stone Pathway - Providing A New Laterite Stone Of Size 30 X 20 X 20 Cm Pathway Connecting To The Tombstone, Including Excavation And Preparation Of Ground, Levelling And Dressing, Providing Suitable Base Or Bedding, Supplying And Laying Laterite Stone Blocks Of Approved Size And Thickness To Proper Line, Level And Slope, Including Joint Filling, Dressing, Cleaning, Transportation, Labour, Tools, Tackles And All Incidental Works, Complete As Directed By The Engineer In Charge , Recess Pointing To The Apron Or Pathway - Recess Pointing To The Apron Or Pathway Using Lime Mortar In The Proportion Of 1 1 1, Including Neat Finishing, Matching With The Existing Surface, Curing And All Incidental Works, Complete. , Providing, Fabricating, Supplying And Fixing Visitor Information Or Interpretation Board - Providing, Fabricating, Supplying And Fixing Visitor Information Or Interpretation Board Of Approved Design And Dimensions, Comprising Suitable Ss 304 Grade Stainless Steel Supporting Frame And Posts, Duly Welded, Ground Smooth And Finished With Satin Or Hairline Finish, Securely Fixed To The Ground With Suitable Stainless Steel Base Plates, Anchor Fasteners And Pcc Foundation, Including Excavation, Backfilling And Disposal Of Surplus Earth. The Information Panel Shall Consist Of 4 Mm Thick Aluminium Composite Panel Of Approved Colour And Finish, Securely Fixed To The Frame Using Stainless Steel Screws And Provided With High Quality Uv Resistant Outdoor Grade Digitally Printed Graphics, Text, Photographs, Monument History, Significance, Visitor Information And Other Approved Content. The Printed Surface Shall Be Suitably Protected With Uv Resistant Outdoor Grade Protective Lamination Or Finish, Complete With All Necessary Fittings, Fixtures, Printing, Lettering, Graphics, Welding, Polishing, Transportation, Erection, Alignment, Labour, Tools, Tackles And All Incidental Works, Complete In All Respects As Directed By The Engineer-In Charge. As Per Drawing , Roviding, Supplying And Fixing Pole Mounted Stainless Steel 304 Grade Dustbin - Providing, Supplying And Fixing Pole Mounted Stainless Steel 304 Grade Dustbin Comprising 2 Nos. Cylindrical Bins Of 50 Litre Capacity Each, Mounted On 3 Nos. Stainless Steel Poles With Stand, Fabricated Entirely From Stainless Steel Grade 304. The Poles Shall Be Of 29 To 32 Mm Diameter, 1000 To 1099 Mm Height And 1.0 Mm Pipe Thickness, With Dustbin Container Wall Thickness Of 0.5 Mm. The Bins Shall Be Perforated, Provided With Swing Type Lids Or Containers, With Approximately 15 Cm Ground Clearance From Pole Stand To Bottom Sheet Of Dustbin, Including All Necessary Fixing Accessories, Complete In All Respects , Supply And Fixing Of Approved Design Granite Stone Benches - Supply And Fixing Of Approved Design Granite Stone Benches Of Size 200 X 60 X 80 Cm, Two Numbers, With Backrest, Including Cost Of Granite Stone, Transportation, Cutting, Shaping, Moulding And Polishing To The Required Design, Earthwork Excavation, Pcc Or Rcc For Foundation And Pedestal, Fixing In Position With Necessary Cement Mortar, And All Labour, Materials, Tools And Tackles, Etc., Complete As Directed By The Engineer In Charge. , Providing And Fixing New Gi Post And Chain Fencing Around The Tombstone - Providing And Fixing New Gi Post And Chain Fencing Around The Tombstone, Including Dismantling And Removal Of Existing Fencing, Gi Posts, 6 Mm Gi Chain With Additional Length For Loose Or Curved Arrangement, Decorative Caps, Fixing Accessories, Anchoring Or Pcc Foundations Wherever Required, Labour, Transportation, Tools And Incidental Works, Complete , 4 Mp Fixed Network Colour Camera - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, Comprising Suitable Outdoor-Rated Cctv Cameras Of Approved Specification, Mounting Brackets, Necessary Cabling, Conduits, Connectors, Power Supply Arrangements And All Required Accessories, Integrated With The Existing Cctv Surveillance System Wherever Feasible, Including Mounting, Cable Laying, Termination, Configuration, Testing And Commissioning, Complete With All Materials, Labour, Tools, Tackles And Incidental Works As Directed By The Engineer In Charge , Poe Port Switch Gaga 8 X Gigabit Poe Port 1X Gigabit - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , D Link Cat 6 Cable - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Optical Fibre 12 Core - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , 3 Core Power Cable - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Power Socket And Switch - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Sintex Box Or Junction Box - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Camera Housing Box - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Gi Pipe 4 Inch 20 Feet - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Gi Pipe 3 Inch 20 Feet Conduit And Accessories - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Pvc Pipe Conduit And Accessories - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security, , Labour Charges Or Service Charges - Providing, Supplying, Installing, Testing And Commissioning Additional Cctv Camera Surveillance System At The Monument For Enhancing Security,
Basic Detail
Tender No GEM/2026/B/8246762
Bidding Type Tender
Location
City Thiruvananthapuram
State Kerala
Key Dates
Publish Date 05 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 12.80 Lakhs
Tender Fee Ref. Documents
EMD 25605
Exemption Available
Document List
21167f85-8853-4c02-99b2-c2cba80a2264.pdf
specification_2026-11-05-17-19-52_01e266c577fc16ee4ccd40fc7204a0a2.pdf
10134229_Boq_1.xlsx
ATC1_aa9802af-e8fc-4f7d-bc2e1793883961939_JCA_TSR_SC.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 16 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 17 days

Tender Documents

Download All (ZIP) ↓
pdf

21167f85-8853-4c02-99b2-c2cba80a2264.pdf

pdf

specification_2026-11-05-17-19-52_01e266c577fc16ee4ccd40fc7204a0a2.pdf

xlsx

10134229_Boq_1.xlsx

pdf

ATC1_aa9802af-e8fc-4f7d-bc2e1793883961939_JCA_TSR_SC.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender