Tender For Fault Finding In Ht/Lt Cables Including Repair/Replacement, Rerouting And Shifting Of Faulty/ Damaged 11 Kv To 0.220Kv Ht/Lt Cables With Straight Through/End Joints, Repairs / Replacement Of Street Lights , Timers, Contactors And Connected
Tender Value
48 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
13 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fault Finding In Ht/Lt Cables Including Repair/Replacement, Rerouting And Shifting Of Faulty/ Damaged 11 Kv To 0.220Kv Ht/Lt Cables With Straight Through/End Joints, Repairs / Replacement Of Street Lights , Timers, Contactors And Connected Items At Shankar Vihar , Anuj Vihar, Vrc-I,Ii&Iii, Ihq Mod Camp, Yogender Vihar Alongwith Connected Area Of Cams , Dgis, Vikram Vihar And Cao Pool, Wardec In The Aor Of Age (U) E/S No-Iii Under Ge (U) Elect Supply Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Testing the cables with high voltage DC testing machine and locating the fault in the cables as well as tracing of unidentified route of 33 KV HT cable by fault locating machine to trace out pin point exact position of fault. Disconnecting faulty 33 KV HT cables of different sizes from both ends as well as at two pole structure (where available) and reconnecting after removal of Fault complete all as specified and directed by Engineer-in-Charge.Note: (a) 33 KV HT cable & joints shall be measured and paid for seperately under respective items of schedule. (b) Excavation and earth work will be measured and paid for seperately under respective items of schedule. (c) T & P and labour for rectification of fault shall be provided by the contractor & cost is deemed in the item rate.(d) PCC cable Cover shall be paid separately.(e) Fault to the contractor wiil be intimated vide phone/e-mail /whatsapp.The Contrator has to rectify the fault within 12 Hrs ,failure of the contractor to attend the fault beyond 12 Hrs , a penalty of Rs. 1000/Hrs will be recovered , fault will be retified by the other contractor /vendor under Risk & Cost by deducting the rectification cost / cost as finalised by the accepting officer with penalty from the work done. |
| 2 | Supply, laying, jointing and testing in assorted piece/ Sizes of 8 to 10 mtr length towards cable faults/ joint replacement /insulation break down for making straight through joints where cable loops are not available towards rectification of cable faults, XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured electric HT power cable (heavy duty) with multistranded aluminium conductors of sizes 3 Core, 300 to 400 Sqmm,33 KV grade (earth) system, laid in trenches/ ducts /encased in G.I. pipe/CI Pipe/fixed to pole including testing complete all as specified and directed by Engineer-in-Charge. |
| 3 | Material & Labour for complete jointing and testing, straight through joint, heat shrinkable type, suitable for HT, 33 KV (E) XLPE aluminium stranded conductors cable 3 core, 300 to 400 Sqmm cables, against joint failures & breakdown /damages, including taking out faulty pieces of cable from any depth of trenches and relaying properly after completeion of jointing as well as refixing of existing cable route indicater (where available).Excavation and earth work will be measured and paid for seperately under respective items of schedule complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material and labour for supply jointing and testing,outdoor end termination heat shrinkable type joint , suitable for HT, 33 KV (E) XLPE cables, aluminium stranded conductors cable 3 core, 300 to 400 Sqmm. including taking out of cable from any depth of trenches and relaying properly after completeion of jointing. Note : Excavation and earth work will be measured and paid for seperately under respective items of schedule complete all as specified and directed by Engineer-in-Charge. |
| 5 | Testing the cables with high voltage DC testing machine and locating the fault in the cables as well as tracing of unidentified route of 11 KV HT cable by fault locating machine to trace out pin point exact position of fault. Disconnecting faulty 11 KV HT cables of different sizes from both ends as well as at two pole structure (where available) and reconnecting after removal of Fault complete all as specified and directed by Engineer-in-Charge.Note: (a) 11 KV HT cable & joints shall be measured and paid for seperately under respective items of schedule. (b) Excavation and earth work will be measured and paid for seperately under respective items of schedule. (c) T & P and labour for rectification of fault shall be provided by the contractor & cost is deemed in the item rate. (d) PCC cable Cover shall be paid separately.(e)Fault to the contractor wiil be intimated vide phone/e-mail /whatsapp.The Contrator has to rectify the fault within 12 Hrs ,failure of the contractor to attend the fault beyond 12 Hrs , a penalty of Rs. 1000/Hrs will be recovered , fault will be retified by the other contractor /vendor under Risk & Cost by deducting the rectification cost with penalty from the work done. |
| 6 | Supply and Laying in assorted piece/ Sizes of 8 to 10 mtr length towards cable faults/ joint replacement /insulation break down for making straight through joints where cable loops are not available towards rectification of cable faults, laying, jointing and testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured electric HT power cable (heavy duty) with multistranded aluminium conductors of the following cable sizes,11 KV grade (earth) system, laid in trenches/ ducts /encased in G.I. pipe/CI Pipe/fixed to pole including testing complete all as specified and directed by Engineer-in-Charge. |
| 7 | 3 core 300 Sq mm |
| 8 | 3 core 240 Sqmm |
| 9 | 3 core 185 Sq mm |
| 10 | 3 core 120 Sq mm |
| 11 | Material & Labour for complete Jointing and testing, indoor end termination heat shrinkable type joint , suitable for HT, 11 KV (E) XLPE cables, aluminium stranded conductors cable 3 core,240 sqmm to 300 Sqmm. against Joint Failures complete all as specified and directed by Engineer-in-Charge.Note :- Excavation and earth work will be measured and paid for seperately under respective items of schedule |
| 12 | All as per srl item No 7 here -in-before but size of 3 core,120 to185 sqmm. complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material and Labour for complete jointing and testing,outdoor end termination heat shrinkable type joint , suitable for HT, 11 KV (E) XLPE cables, aluminium stranded conductors cable 3 core, 240 Sqmm to 300 sqmm. against joint Failures complete all as specified and directed by Engineer-in-Charge.Note:- Excavation and earth work will be measured and paid for seperately under respective items of schedule |
| 14 | All as per srl item No 9 here -in-before but size of 3 core,120 to 185 sqmm. complete all as specified and directed by Engineer-in-Charge. |
| 15 | M & L for complete Jointing and testing, straight through joint, heat shrinkable type, suitable for HT, 11 KV (E) XLPE cables, aluminium stranded conductors cable 3 core, 240 to 400 Sqmm against joint failures & breakdown /damagesincluding taking out faulty pieces of cable from any depth of trenches and relaying properly after completeion of jointing as well as refixing of existing cable route indicater (where available) complete all as specified and directed by Engineer-in-Charge.Note:- Excavation and earth work will be measured and paid for seperately under respective items of schedule.. |
| 16 | M & L for complete Jointing and testing, straight through joint, heat shrinkable type, suitable for HT, 11 KV (E) XLPE cables, aluminium stranded conductors cable 3 core, 120 to 185 Sqmm against joint failures & breakdown /damages. including taking out faulty pieces of cable from any depth of trenches and relaying properly after completeion of jointing as well as refixing of existing cable route indicater (where available complete all as specified and directed by Engineer-in-Charge.Note:- Excavation and earth work will be measured and paid for seperately under respective items of schedule. |
| 17 | Testing the cables with high voltage DC testing machine and locating the fault in the cables by fault locating machine to pin point exact position of fault, disconnecting faulty 1100 V LT cables of different sizes from both ends, removal of Fault, Re-connections and testing of cables after removal of fault complete all as specified and directed by Engineer-in-Charge.Note: (a) 1100 Volt LT cable & joints shall be measured and paid for seperately under respective items of schedule. (b) Excavation and earth work will be measured and paid for seperately under respective items of schedule. (c) PCC cable Cover shall be paid separately.(d) Fault to the contractor wiil be intimated vide phone/e-mail /whatsapp.The Contrator has to rectify the fault within 12 Hrs ,failure of the contractor to attend the fault beyond 12 Hrs , a penalty of Rs. 1000/Hrs will be recovered , fault will be retified by the other contractor /vendor under Risk & Cost by deducting the rectification cost with penalty from the work done. |
| 18 | Material & Labour for laying LT underground cables 1100 volts grade, PVC insulated XLPE and PVC sheathed, heavy duty armoured, with multistranded aluminium conductors, IS-1554 marked and laying, connecting, testing and commissioning in replacement ( including taking out existing cable) LT cable of PVC sheathed XLPE cable armoured aluminium conductor 1100 V graded after taking out/down old existing unserviceable cable of complete length as required for laid in trenches / ducts / fixed on poles / walls / l+B42aid under roads / paths / drain / culverts or encased in GI pipe complete all as specified and directed by Engineer-in-Charge.Note: (a) 1100 Volt LT cable & joints shall be measured and paid for seperately under respective items of schedule. (b) Excavation and earth work will be measured and paid for seperately under respective items of schedule. (c) PCC cable Cover shall be paid separately. |
| 19 | 4 core, 10 sqmm. |
| 20 | 4 core, 16 sqmm. |
| 21 | 3.5 core, 25 sqmm. |
| 22 | 3.5 core, 35 sqmm |
| 23 | 3.5 core, 50 sqmm |
| 24 | 3.5 core,70 sqmm |
| 25 | 3.5 core,95 sqmm |
| 26 | 3.5 core,120 sqmm |
| 27 | 3.5 core,185 sqmm |
| 28 | 3.5 core,240 sqmm |
| 29 | 3.5 core,300 sqmm |
| 30 | M & L for jointing and testing straight through joint heat shrinkable type with jointing kit suitable for cable XLPE insulated armoured heavy duty aluminium conductor 1100 Volts grade of size 25 to 50 Sqmm x 3.5 / 4 core against joint failures & breakdown /damages. including taking out faulty pieces of cable from any depth of trenches and relaying properly after completeion of jointing as well as refixing of existing cable route indicater (where available).Earth work will be measured and paid for seperately under respective items of schedule complete all as specified and directed by Engineer-in-Charge. |
| 31 | All as per srl item No 15 here -in-before but size of 70 to 150 Sqmm x 3.5 core against joint failures & breakdown /damages complete all as specified and directed by Engineer-in-Charge. |
| 32 | All as per srl item No 15 here -in-before but size of 185 to 240 Sqmm x 3.5 core against joint failures & breakdown /damages complete all as specified and directed by Engineer-in-Charge. |
| 33 | All as per srl item No 15 here -in-before but size of 300 to 400 Sqmm x 3.5 core against joint failures & breakdown /damages complete all as specified and directed by Engineer-in-Charge. |
| 34 | M&L for Excavation in trenches in soft and loose soil n.exc 1.5 mtr wide and n.exc. 1.5 mtr depth for laying and taking out of electric power cable and getting out complete all as specified and directed by Engineer-in-Charge. |
| 35 | All as per item No 19.00 above but for each additional 1.5m or part thereof in depth beyond the first 1.5 m complete all as specified and directed by Engineer-in-Charge. |
| 36 | M&L for Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for Removing excavated material not exceeding 50 mtr away and depositing where directed at a level n. exc 1.5 mtr above the starting point . |
| 38 | Material & labour for river washed and screened dry sand for filling under and above the under ground cable for cushioning of cables etc.complete all as specified and directed by Engr–in-charge, Note : Measurement shall be taken after punning down. |
| 39 | Supplying & laying in replacement un-reinforced precast concrete cable cover, class HV, type 1, flat size 300mmx 180mm x 40mm complete all as specified and directed by Engineer-in-Charge. |
| 40 | Laying only old HT cable cover obtained from excavation complete all as specified and directed by Engineer-in-Charge. |
| 41 | Supply & Laying in replacement precast cable cover class LV Type-1 Flat size 250x150x40mm laid in trenches for cable protection etc complete all as directed by Engineer-in-Charge. |
| 42 | Supply & Laying only old LT cable cover obtained from excavation complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply & Laying in replacement precast cable cover class EHV Type-2 Flat size 450x180x40mm laid in trenches for cable protection etc complete all as directed by Engineer-in-Charge. |
| 44 | Laying only old HT 33 KV cable cover obtained from excavation complete all as specified and directed by Engineer-in-Charge. |
| 45 | Labour & T&P only for trimming of tree upto 7 mtr length & 3 mtr distance all around the street light tubular pole with the help of ladder and after removing disposed Off the same away from resident area complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F in replacement of driver accessories suitable for existing LED secruity/ flood light/ High mast light supports standard 230 V AC, PF > 0.95, Frequency 50 Hz, THD < 10% of suitable size /specification as per site requirement, as complete all as specified and directed by Engineer-in-Charge. |
| 47 | Taking out old unserviceable street light fittings and supply and fixing of new generation energy saving and environment friendly long life verasalite pressure die- cast aluminium IP 65 road way luminare with high power LEDs of 90 Watts capacity,Input voltage 120 V to 270 V AC (50 Hz) with built-in-surge protection 4 KV,, luminous efficacy 110 to 130 lumens per watt,PF > 0.95 as light source and exclusively designed for poly carbonate cover with electronic drive.along with necessary wiring and clamps for fixing complete all as specified and directed by Engineer-in-Charge. |
| 48 | M & L for cutting and removing grass, vegetation bushes etc from surrounding of installation/LT Panel/Sub Stations and removing all rubbish to a distance not exceeding 50 m as directed complete all as specified and directed by Engineer-in-Charge. |
| 49 | Material and labour for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) for foundation, filling and mass concret etc complete all as specified and directed by Engineer-in-Charge. |
| 50 | Material and labour for PCC 1:3:6 type C-2, (using 40 mm graded crushed stone aggregate) for foundation, filling and mass concret etc complete all as specified and directed by Engineer-in-Charge. |
| 51 | Material and labour for PCC 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) for Coping etc complete all as specified and directed by Engineer-in-Charge. |
| 52 | M&L for painting of LT Steel tubular poles of any sizes with apply of 2 coats of aluminium paint after single coat of primer including rubbing with wire brush/emery paper & writing pole Nos in black letters on white background size 2 cm in appropriate size of letters including making yellow and black radium strips upto height of 1.5 mtr above from ground level complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply & fixing in replacement of SMC Junction box of IP 54 rating for street light having side hinged, outside dimention 333x233x120mm and inside dimention 300x200x105mm including 4 Nos aluminium bus bar of 40 Amps rating and 1 No 6 A MCB SP connecting of existing LT power cable complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply and fixing in replacement of Automatic Light Timer switch for auto day/Night on and OFF with Nature switch Cat No. SWADEEP-02EC12KW3P, infra ray sensor with pre sawn switching off timer, 4-8 hrs, of Maximum load capacity of 24 A. Degree of protection conforms to IP 65 complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply & fixing in replacement Contactor of timer panel for street light water proof sensor 220V auto day/Night ON and OFF photo cell , NO/NC ,LDR Sensor of capacity 24 A of street light control panels complete all as specified and directed by Engineer-in-Charge. |
| 56 | Taking out old damage LT pole and Supplying, Erection & Fixing Steel Tubular swan neck pole SP-31 ,(09 metres long) Painting of Poles with one coat of red oxide primer and one coat of aluminum paint before fixing and one coat of aluminum paint after fixing. The complete embedded portion shall be painted with two coats of black bituminus paint complete with cast iron base plate complete all as specified and directed by Engineer-in-Charge.. (Note : Excavation earth work, PCC will be paid separately under respective items.) |
| 57 | Supply and fixing in replacement of of new generation energy saving & enviroment friendly aluminium pressure die cast high power LED flood light luminare of watt 120 Watts of IP66 rating,class I protection integral driver operation at 170-270 V AC 50Hz supply with built-in-surge protection (5KV-6KV),12000-14400 lumens of high intensity brightness complete all as specified and directed by Engineer-in-Charge. |
| 58 | M&L in replacement for service cable 6 Sqmm 2 core 1100 volts grade heavy duty cable PVC insulated stranded alumn conductor, served with an inner sheathing of PVC tape and overall PVC sheathed in service connections/perimeter light supply as per site requirement, flat or circular complete all as specified and directed by Engineer-in-Charge.. |
| 59 | M&L for boring of holes under road/pavement/hard standing manual type including material and labour including HDPE pipe of 80mm dia suitable for 04 Kg/cm working pressure. Wall thickness of pipe not less than 6.5 mm. complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 60 | M&L for boring of holes under road/pavement/hard standing manual type including material and labour including HDPE pipe of 80mm dia suitable for 04 Kg/cm working pressure. Wall thickness of pipe not less than 6.5 mm. complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender