Tender For Provn Of Toilets At Various Locations, Provn Of Raised Platform For 06 Nos Bp Morcha & Provn Of Access For Duty Post Near Main Guard Room At Air Force Stn Bikaner Under Ge Af Nal
Tender Value
11.13 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
19 days left
EMD
22500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilets At Various Locations, Provn Of Raised Platform For 06 Nos Bp Morcha & Provn Of Access For Duty Post Near Main Guard Room At Air Force Stn Bikaner Under Ge Af Nal
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation in soft/ loose soil not exceeding 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc or for shafts wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed. |
| 3 | Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed. |
| 4 | Removing excavated material to a distance exc. 50 metre but not exceeding 100 metre and depositing where directed at a level not exceeding 1.5 Metre above starting point, complete all as specified and directed. |
| 5 | M&L for plain cement concrete 1:4:8 type D2 using 40mm graded aggregate as in foundation complete all as specified and directed. |
| 6 | M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surface of concrete complete all as specified and directed. |
| 7 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 8 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed. |
| 9 | M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 10 | M & L for Mild steel TMT bars 6mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips for stirrups, spacer and binder complete all as specified and directed. |
| 11 | M & L for Reinforced cement concrete design mix M-25 (20 mm graded aggregate) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 12 | M & L for Reinforced cement concrete design mix M-25 (20 mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5 m span, complete all as specified and directed. |
| 13 | M & L for Reinforced cement concrete design mix M-25(20 mm graded aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 14 | M&L for Brickwork with subclass ‘B’ bricks,using old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 15 | M&L 'Brickwork with subclass ‘B’ bricks, using old size bricks, straight, or curved on plan to any radius in half brick thick walls built in cement plaster in (1:6) complete all as specified and directed. |
| 16 | M&L for 15 mm thick cement plaster in (1:6) on fair faces of brick work finishing even and smooth w/o using extra cment complete all as specified and directed. |
| 17 | M&L for Rendering 15mm thick cement mortar 1:4 on brick or concrete wall surface finished even and smooth without using extra cement.complete all as specified and directed. |
| 18 | M&L for rendering 5 mm thick on ceiling (brick or concrete surfaces) in cement mortar 1:3 and surface finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.. |
| 20 | M&L for two coat of oil bound distemper over a coat of primer incl prep of newly plastered surfaces of wallsand two coat of putty, complete all as specified and directed. |
| 21 | M&L for Hardcore of Broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 22 | M&L for 100mm thick Cement concrete type D2, 1:4:8( 40 mm graded agg) as in sub base of flooring complete all as specified and directed. |
| 23 | M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 25 mm thick as in sub base of flooring to receive floor top and complete all as specified and directed |
| 24 | M&L for non skid ceramic coloured tiles 7-8 mm thick, (square/rectangular) area of each tile exc. 0.11 but n.exc. 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in CM(1:6) ,complete all as specified and directed. |
| 25 | M & L for joint free glazed coloured ceramic coloured tiles of 300 mm x 600 mm x 8 mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, laid over and including 10mm thick rendering in CM(1:4), all as specified and directed by Engineer-in-charge. |
| 26 | M& L for cement concrete type C-2 1:3:6 75 mm thick as in plinth protection complete all as specified and directed. |
| 27 | S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall & laid in trenches or in floors, including clamps as required, complete all as specified and directed. |
| 28 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall & laid in trenches or in floors, including clamps as required, complete all as specified and directed. |
| 29 | S&F in repair 75mm dia PVC (SWR) floor trap plain with CP grating including jointing with solvant cement including necessary PCC & form work as required complete all as specified and directed. |
| 30 | S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required with oval access door complete all as specified and directed. |
| 31 | S&F 110mm dia PVC (SWR) bends with rubber ring joints fixed as required with oval access door complete all as specified and directed. |
| 32 | S & F 110mm bore PVC SWR Junction single (Single T) with access door complete all as specified and directed |
| 33 | S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed. |
| 34 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas exceeding 30 cm in depth but not exceeding 1.5 m depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge |
| 35 | Earth work in excavation by mechanical means (Hydraulic excavator) means over areas exceeding 1.5 cm in depth but not exceeding 3 m depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge |
| 36 | Material & Labour for reinforced concrete pipe 150mm bore, Class NP-3, laid and jointed with collars complete all as specified and as directed. |
| 37 | Concrete bed to drain pipes of 150 mm internal dia, including packing under, and haunching against the sides of pipes after they are laid and tested in plain cement concrete 1 : 3 : 6 type C-2 using 40mm graded crushed stone aggregates complete all as specified and directed |
| 38 | M& L for on site LLDPE septic tank 2000 ltrs under standard guidlines as per IS 2470 such as 100% virgin, light weight, leak proof,and flexible enough to resist soil shift cracking,with minimum wall thickness of 6 mm to 10 mm, with chamber design of 2 or 3 type etc...and approved manufacturer ie. syntex or equal and designed to carry sewage and sullage water, incl excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection to existing or nely laid sewage liine & removal of earth and site clearence complete all as specified and directed. |
| 39 | Supplying & fixing for factory made solid PVC door frame of size 50mm x 47mm made out 5mm plain colour PVC sheets re-inforced with MS tube Square tube in opening complete all as specified & directed |
| 40 | M&L for factory made solid panel pvc door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottam rail . paneling of plain colour PVC sheets to be filted in MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with the solvent cement complete all as specified and directed. |
| 41 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) tripple layer hoisted and fixed in position, incl union/nipple and float valve suitable for connection complete all as specified and directed. |
| 42 | Supplying and laying of 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 43 | Supplying and laying of 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 44 | S & F of CPVC fittings Brass elbow, 20 mm complete all as specified and directed. |
| 45 | S & F of CPVC fittings Male threaded brass adaptor, 20 mm complete all as specified and directed. |
| 46 | S & F of CPVC fittings Unions, 20 mm complete all as specified and directed. |
| 47 | S & F of CPVC fittings Ball valves, 20 mm complete all as specified and directed. |
| 48 | S & F of CPVC fittings Flange and tank adaptor, 20 mm complete all as specified and directed. |
| 49 | S & F of CPVC fittings brass Tee, 20 mm complete all as specified and directed. |
| 50 | Supply & fixing of vitreous china wash hand basin, white flat back, size 300mm x 450mm including pillar tap 15mm dia chromium plated with capstan head with long screwed shanks and fly nuts, and brass chromium plated waste coupling 32mm dia complete all as specified & directed. |
| 51 | Supply and fixing Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)including TRAP & connection to trap, & to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor, set with cement concrete, fixed as in repairs complete all as specified and directed. |
| 52 | Supply and fixing PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC bend for required squat pattern etc, set with concrete and making good to floor, fixed as in repairs complete all as specified & directed. |
| 53 | Supply & fixing PVC connections as in repair 15mm size with PTMT nuts of length 450 mm as in repair complete all as specified and directed. |
| 54 | Supply and fixing fancy type angle stop valve Quarter trun, chromium plated,screwed down, high pressure with crutch or butterfly handle screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 55 | Supply and fixing long body Bib taps Quarter trun,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, suitable for 15mm bore pipe complete all as specified and directed. |
| 56 | S&F Chromium plated shower roses 125 mm size fixed with swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 57 | S&F soap dish chromiume plated, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 58 | Supply and fixing bib cock Quarter turn cast copper alloy chromium plated, fancy type,short body screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 59 | S & F as Two way angle cock Quarter turn cast copper alloy 15 mm bore chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unioin fixed complete all as specified and directed. |
| 60 | Supply and fixing faucet health (hand jet) 15mm bore cast copper alloy, chromium plated with flexible chromium plated connection pipe 1.5 mtr length, with fittings, complete all as specified and directed. |
| 61 | Supply and fixing central hole Basin Mixer long swang neck, without poup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 62 | S&F tubular towel Rail 600 mm length and 20 mm dia of brass chromium plated complete all as specified and directed. |
| 63 | S&F in repairs 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete as directed. |
| 64 | S&F of Stop valves Quarter trun, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 65 | S&F anodised aluminium powder coating aluminium section weighing not less than 0.55Kg/m {minimum thickness of powder coating 50 micron)frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 66 | S&F anodised aluminium Powder coating window and ventilator shutters, side hung type without sash bars aluminium section weighing not less tha 0.55Kg/m (with style and rail of size 47.62 x 44.45 x 1.67mm) including necessary joining cleats, glazing clips, ruber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150mm long (1no), hinges type B-21 100mm long(2 no.) suitable handle(1 no) including all necessary builders hardare and aluminium daimond grill complete all as specified and directed. |
| 67 | S & F 4.80 mm thick sheet glass of ordinary quality plain / tinted and glazing with rubber beads, clips etc complete all as specified and directed. |
| 68 | Supply and fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and avrg widh of aperature 1.18mm incl fixing to wooden/steel frames with tinned tacks or galvanised wire or wooden bead complete all as specified & directed. |
| 69 | M&L for Formwork to sides of pillars, posts, struts, piers, columns, and stanchions, complete all as specified and directed. |
| 70 | Material & Labour for barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed. |
| 71 | Supply and fixing aluminium fabricated type extruded handles of size 150mm complete all as specified & directed. |
| 72 | S&F of 100 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 73 | S&F for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed. |
| 74 | M&L for PCC in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 75 | M&L for factory made precast reinforced cement concrete 1:2:4, or higher as in cover slab of manholes, Drain etc, set in cement mortar 1:4 complete all as specified and directed. |
| 76 | Reinforced cement concrete design mix M-25 in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 77 | M&L for Brickwork with sub class ‘B’ bricks using old size bricks honey comb walling, built in CM 1:6 complete all as specified and as directed. |
| 78 | M&L for broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed. |
| 79 | M&L for rendering 10 mm thick on wall (brick or concrete surfaces) in cement mortar 1:4 and surface finished even and smooth without using extra cement complete all as specified and directed. |
| 80 | Material & Labour for 150 mm thick cement concrete type D-2,1:4:8 (40mm graded stone aggt) as in sub base to recive floor top concrete all as specified & directed. |
| 81 | M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40 mm thick as in flooring and complete all as specified and directed |
| 82 | M&L for MS work in Roof trusses (framed), trussed, purlins, crane gantries, rails, posts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.including special shaped washer etc. complete and including all necessary drilling or cutting holes in brick/ concrete surfaces and making good, welding work, bolting or reveting etc and similar work conforming to Fe-290 Gde E-165 complete and all as specified |
| 83 | M & L for Point wiring on concealed conduit with 1.5 Sq mm copper conductor single core PVC insulated unsheathed 1100 V grade multistranded drawn into and including rigid PVC conduit with accessories of suitable dia medium grade concealed in walls/floors and pressed steel terminal boxes MS, duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated sheet including one running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed. Note : Rate quoted by the contractor is incl for cutting chassis for concealed the conduit and making good the disturbed surfaces to match with the existing finishes completed all as directed by Engineer-in-Charge. |
| 84 | One light/bell/ceiling fan/ ex fan point controlled by one, one way switch 6 A, SP complete all as specified and directed. |
| 85 | One 3 pin 6 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and directed. |
| 86 | S&F modular switch 1way 6A, 1 module complete all as specified and directed. |
| 87 | S&F modular socket, 6A - 2/3 pin combined 2 module, flush tpe complete all as specified and directed. |
| 88 | S&F modular metal flush box 4 module complete all as specified and directed. |
| 89 | S&F modular metal flush box 3 module complete all as specified and directed. |
| 90 | S & F modular white cover plate with frame 4 module complete all as specified and directed. |
| 91 | S & F modular white cover plate with frame 3 module complete all as specified and directed. |
| 92 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and directed. |
| 93 | Supply and fixing LED lights fitting 1x 20W, 220V, AC Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 94 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 95 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 96 | Supply and fixing sheet Metal enclosure double door type for DB’s 240 Volts Single Pole and Neutral 4 way with 200 Amps rated bus bar complete all as specified and as directed |
| 97 | Supply and fixing MCB SPN 32 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge. |
| 98 | Supply and fixing MCB single pole 6 to 32 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge. |
| 99 | Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep, metal body with louver including making of hole to the wall and making good the disturbed surface complete all as specified and directed. |
| 100 | M&L sand cushioning using dry and clean tibba sand in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable in trenches/ducts including consolidation of each layers complete all as specified and directed. |
| 101 | Material and labour for fixing of new un-reinforced pre-cast concrete cable covers, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed. |
| 102 | Supplying, laying, jointing and testing of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 4 core 16 Sqmm laid in trenches/duct/pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed. |
| 103 | Supplying and laying GI tubing light grade of 32mm bore incl all accessories for encasing cables for mechanical protection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or along poles with complete accessories such as bends/sockets/reducers/ saddles incl necessary threading/drilling works complete all as specified and as directed. |
| 104 | Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the alvanised iron earth lead 4mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth elelctrode to DBs/main switch incl provn of concrete pit in PCC , GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr complete all as specified and directed. M&L for disconnecting from the existing location cutting off worn out aluminium cable end and Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded,galvanized steel strip or wire armoured,electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core including taking out existing cable of any size. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender