Tender For Repair And Maintenance Of Lighthouse Tower And Allied Structures At Mangrol Lighthouse Station.
Tender Value
33.35 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
3 days left
EMD
66710
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Junagadh → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Lighthouse Tower And Allied Structures At Mangrol Lighthouse Station.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Masonry work in Cement Mortar manually/by mechanical means including stacking of serviceable materials and disposal of unserviceable materials with in a lead of 50.0 metre or more including the cost of all labours,materials,tools & plants,lead & lift,transportation etc. complete as per instruction and direction of Engineer-In-Charge. |
| 2 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared etc complete as per instruction and direction of Engineer-In-Charge. |
| 3 | Dismantling & Taking out damaged doors,window,CB and clerestory windows,shutters including chowkhats/frames,glass , architrave, holdfast and stacking within 50 metres lead including cost of all materials,labours,tools ,plants, and all other charges etc complete & as per instruction and direction of Engineer-In-Charge. |
| 4 | Taking out existing wooden door /window shutter,repar by cutting,painting etc and refixing of repaired door & window shutters to existing door/window frames, including replacement of hinges with screws ,etc as required,all complete as per the direction of Engineer-In-Charge .(measurement of each means one of door/window including door/window booth shutters) |
| 5 | Replacement of old broken glass panels(including Teakwood beading) with new 3.5/4 mm thk frosted /plane window glass panes fixed with clay,pins etc including removing/disposing of old crack/damaged window glass up to all specified heights ,all as directed and all as per standard specification, including cost of all materials,labours ,tools & plants,scafolding, ,transportation (including lead & lif) etc.complete as per Instruction and direction of Engineer-In-Charge. |
| 6 | Providing & fixing Anodized aluminium section(approved Heavy 1rst quality , brand & colour ) sliding/openable /fixed window - (of section 60 mm X 30 mm / 40 mm X 20 / 65 x 100 mm as applicable /approved section as per requirement ) with 5 mm or more tinted glass for window/Ventilaor opening including all fixtures and fittings, tools, plants, labour, material, transportation ,lead ,lift etc. as per instructions & direction of Engineer in-charge. |
| 7 | Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 ≥45 MPa and adhesive bond strength Class R3 ≥1.5 MPa. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.22.25.1 For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25 mm and then primed the area with integral crystalline slurry @0.05 kg/running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50 kg/running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05 kg/running metre per coat.etc complete as per instruction and direction of Engineer-In-Charge. |
| 8 | Providing & fixing (for LH Tower ) outside work )double scaffolding system (cup lock type) on the exterior side,up to all height made with 40 mm dia M.S tube 1.5 m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S tubes,M.S tube challies,M.S clamps and M.S staircase system in the scaffolding for working platform etc and maintaining it in a serviceable condition for the required duration as approved and removing it there after.The scaffolding system shall be stiffened with bracings,runners,connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approved of Engineer-In-Charge.The elevation area of the scaffolding shall be measured for payment purpose.The payment will be made once irrespective of duration of scaffolding.The item also includes labour ,material,transportation,lead & lift up to required height of Lighthouse Tower.(Note: This item to be used for maintenance work judicially,necessary deduction for scaffolding in the existing item to be done ) |
| 9 | Dismantling and removing old /damage plaster raking out joints and clearing the surface for plaster/concrete including disposal of rubbish to the dumping ground within 50 metres lead.etc complete including cost of all materials,labours,tools,plants and all other charges for all heights of LH Tower and as per instruction and direction of Engineer-In-Charge. |
| 10 | Chipping of unsound / weak concrete material from slabs, beams, columns etc. with manual Chisel and / or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 11 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. (for all dia of bar ) |
| 12 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. |
| 13 | Providing and fixing hard drawn steel wire fabric of approved size of mesh to be fixed & firmly anchored to the concrete surface by means of \\" L \\" Shaped mild steel shear key welded with existing reinforcement includingthe cost of materials,labour,tools & plants as approved/directed by Engineer- In-Charge. |
| 14 | 12 mm or more thick ( as per requirement ) water proof cement plaster( with Roff Cemnet - T01/equivalant ) over existing surface of LH Tower and other specified area after maiking the surface rough including supply of all labours,materials,finishing,tools & plants,transportation including ,lead, lift all other charges etc. complete as directed by the Engineer-In-Chrage |
| 15 | Plastering the exposed surface of concrete / masonry wall surfaces in cement mortar 1:4 (1 cement :4 fine bhugavo river sand ) of 15 mm thick or more (neat finish if required) in one layer including making rough the smooth surface( and level the surface),all as directed and (including making of patta,groove,rain drip wherever required )all as per standard specification,including the cost of all materials,labours,tools & plants,scaffolding,transporation,lead,lift , curing, etc.as per instruction and direction of Engineer-In-Charge. |
| 16 | Providing and fixing (approved- colour & shade ) Granite stone 15 mm or more thick gang saw cut ,mirror polished/ framed,premoulded and prepolished,machine cut for platform,vanity counters,window,door sills/jambs,facia and similar locations of required size of approved shade,colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : coarse bhugavo riversand ),joints treated with white cement,mixed with matching pigment,epoxy touch ups,including rubbing,cutting,moulding,nosing,making og groove linning (wherever applicable ) and polishing of edges to give high gloss finish etc. complete including supply of all materials,cutting,tools & plants,equipment,transportation (lead & lift ).etc. as per specification,drawing and direction of Engineer-In-Charge. |
| 17 | Finishing with Epoxy base water proof paint of approved manufacturer , brand & colour( two or more coats for even & smooth surface ) at all locations prepaired and applied as per manufacturers specification including appropriate priming coat,preparation of surface etc complete including supply of all labours,materials, transportation (including lead & lift),tools & plants and all other charges etc. complete as per standard specification for Inspection Quarter etc. complete . as per instruction and direction of Engineer-In-Charge. On Concrete surface over all roofs ( for all heights ) |
| 18 | Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound ) content with water /oil based thinnable cement primer on wall /RCC surface having VOC Less than 50 grams/litre |
| 19 | Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel work |
| 20 | Applying Synthetic Enamel Paint of approved 1 rst quality Berger/Asian /Birla (OPPO) brand over old/new specified surface of LIghthouse Tower etc, (Tower & Staircase Railing /window grill/guard bar ) to give an even shade including throughly cleaning the surface to remove all dirt,dust ,mortar draps,Rust and other foreign matter etc., including cost of all materials, labours, brushes, transportation , scaffolding and ladder safety measures and all other charges etc.,complete as per instruction of Engineer-In-Charge. Two or more Coats including primer coat where ever applicable(including all heights of Light House Tower ) |
| 21 | Providing & fixing /Refixing Brass fittings (Heavy duty of Godrej/ Spheero brand )for doors,windows,Cupboards,Ventilators of shutters and as wherever directed (with brass screws ) etc. for all specified heights including supply of all materials,labours,tools & plants,transportation ,lead,lift etc.complete as per instruction & direction of Engineer-In-Charge. |
| 22 | Brass Aldrop of size 250x16x5 mm |
| 23 | Brass Tower Bolt of size 150x10 mm |
| 24 | Brass Tower Bolt of size 250x10 mm |
| 25 | Brass Handle 125 x 85 x 5.5 mm |
| 26 | Brass Handle 100 x 70 x 4 mm |
| 27 | Brass Butt Hinges of size 125x85x5.5 mm (heavy type) |
| 28 | Brass Butt Hinges of size 100 x 70 x 4 mm (heavy type ) |
| 29 | 250 mm long casement stay |
| 30 | Providing & fixing(with plaster border patta ) departmental details over Granite stone for compound wall as per details :i) departmental engraved logo over granite stone size-36\\" x24 \\"-1 no. ii) Ashok stambh engraved logo over granite tsone size- 12 '\\" x 14 \\"-- 1 no, iii) departmental engraved details in 3 languages size 36\\" x 12 \\"- 3 nos etc complete .including all materials,labours ,transportation,lead & lift and all other charges as per instruction and direction of Engineer-In-Charge. |
| 31 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared as per instruction and direction of Engineer-In-Charge. |
| 32 | Applying Two or more coats on new work Synthetic Enamel Paint of approved 1 rst quality at all heights of Staff qtr over a coat of primer to give an even shade including all other charges etc.,ladder safety measures and all foreign matter etc., including cost of labour, materials, scaffolding, transportation and all other charges as per instruction of Engineer-In-Charge. |
| 33 | Applying Acrylic Smooth exterior paint of required shade Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface at all heights, all as per standard specification and as directed including throughly brooming the surface to remove all dirt,dust,mortar draps & loose paint and other foreign matter including the cost of all labour, materials, scaffolding, tools & plants, transportion(including lead & lift) etc complete as per instruction and direction of Engineer-In-Charge. |
| 34 | Applying Exterior Emulsion Paint on Old work (One or more coat applied @ 0.90 ltr/10 sqm) at all heights, all as per standard specification and as directed including throughly brooming the surface to remove all dirt,dust,mortar draps & loose paint and other foreign matter including the cost of all labour, materials, scaffolding, tools & plants, transportion(including lead & lift) etc complete as per instruction and direction of Engineer-In-Charge. |
| 35 | Applying One or more coats of Acrylic Distemper (Asian/Berger/Readymix-I quality) having VOC content less than 50 grams/ltr of approved brand and manufacture, including filling of cracks & holes / primer wherever required ,applying additional coats wherever required,to achieve even colour and shade on existing old surface of Staff Qtrs/ IQ/ Power House etc ,including throughly brooming the surface to remove all dirt,dust, mortar draps and other foreign matter etc,complete including cost of all labour, materials, scaffolding, transportation etc at all heights to get an even shade including throughly cleaning the surface to remove all dirt,dust,mortar draps and other foreign matter etc.,including cost of all materials, labours, brushes, transportation, scaffolding and ladder safety measures and all other charges etc., complete as per instruction of Engineer-in-Charge. |
| 36 | Providing and fixing AL fittings (Heavy duty of approved ISI brand not less than grade AC 10 as per IS:1868)(for doors, windows, Ventilators, Cupboards) including removing damaged fittings and shutters and as wherever directed (with brass screws) including removing/disposing of unserviceable materials from the site etc, for all heights, labours,tools & plants and instruction of Engineer-In-Charge. |
| 37 | P/F AL Aldrop 300x16 mm long |
| 38 | P/F AL Aldrop 250x16 mm long |
| 39 | P/F 250x10 Long AL door bolts |
| 40 | P/F 150x10 mm Long AL tower bolts |
| 41 | Door AL Rubber Stopper |
| 42 | Door AL Handle 125 mm |
| 43 | 125x75x4 mm AL Butt Hinges |
| 44 | 100x75x4 mm AL Butt Hinges |
| 45 | Casement stay for door/window |
| 46 | Providing and fixing water supply fittings and specials of approved quality asper the following items including supply of all labours/painters,tools,plants,scaffolding,transportation and all other charges etc.complete and specials (including flanges) should be of Jaquar (Essco) make/aprroved quality. |
| 47 | P/Fixing PVC Flexible waste pipe for wash basin/sink of approved quality Jaguar (Essco)make. |
| 48 | P/Fixing C.P Brass 15 mm dia Stop cock-Jaguar(Essco) make. |
| 49 | P/Fixing C.P Brass angle cock with flange of Jaguar(jaquar) brand |
| 50 | P/Fixing C.P Brass 15mm dia Conceal flange of jaquar brand, weighing not less than 690 gms. |
| 51 | P/Fixing C.P Brass 15mm dia Pillar Tap (Long) for wash basin with flange of Jaquar (Essco)brand for kitchen sink. |
| 52 | P/Fixing C.P Brass 15 mm dia Bib Cock with flange of Jaguar(Essco) brand (conforming to IS:8931), weighing not less than 110 gms. |
| 53 | Providing and fixing Toilet Paper Holder of approved jaguar brand. |
| 54 | Providing and fixing water supply line internal/exposed CPVC Pipe (as per requirement) including all fittings like clamps, Tee, bend, cross, reducer, Union, socket, solution, clamps, screws etc fixing with chipping, sealing & testing in wall/floor (concealing/open as required) as directed and as per standard specification, supply of all materials, labours, scaffolding, tools & plants etc. complete for staff qtrs & OH Tank. |
| 55 | 15 mm dia CPVC Pipe |
| 56 | 20 mm dia CPVC Pipe |
| 57 | 25 mm dia CPVC Pipe |
| 58 | Providing and fixing Wash basin (CERA make) of size 550x400 mm (with single tap hole for pillar tap with C.I Brackets (including painting) and fixing waste coupling of steel quality good and Brass coupling of size 40mm, C.P Brass plug with coupling, connector pipe with C.P fixing waste pipe with C.I Brackets and rubber plug for all standard specification and instruction and direction of Engineer-In-Charge, complete for all heights. |
| 59 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. |
| 60 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 61 | Taking out existing wooden door,window,CB shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 62 | Providing and fixing wooden shutters of flush door/ panelled, glazed or panelled and glazed shutters for doors, windows and clerestorey windows of approved quallity with all fixures of approved quality as per standard (heavy duty Brass fittings such as butt hinges, handle, Aldrops, Tower bolts, Door stopper etc. with necessary brsaa screws) all as complete, including cost of labour, materials, scaffolding, transportation and all other charges as per instruction of Engineer-In-Charge. |
| 63 | 35 mm thick shutters for doors |
| 64 | 25 mm thick glazed shutters for windows |
| 65 | Providing and fixing Netlon mesh for window/door/Vent./Meat safe of staff qtrs and wherever directed with 1 st quality teak wood with screws etc.complete for staff qtrs, as per direction of Engineer-In-Charge. |
| 66 | Replacement of old broken glass panels with new 3.5/4 mm thick frosted /plane windows glass panes fixed with clay ,pins etc. including removing/disposing of old crack/damaged windows glass up to all height of building as per standard specification including cost of all materials, labours, transportation, (including lead & lift ) tools and plants scaffolding etc complete for all height. |
| 67 | Providing and fixing bathroom fittings like Towel Rail/Ring, Soap dish, Hook hanger, Mirror of approved quality fixed as directed in walls including supply of all materials(brass) Screws,carpenter/labour,tools & plants and all other charges etc complete for all staff qtrs. as per direction of Engineer-In-Charge. |
| 68 | Providing and fixing bathroom fittings like Towel Rail/Ring, Soap dish,Hook hanger,Mirror of approved quality fixed as directed in walls including supply of all materials(brass) Screws,carpenter/labour,tools & B91 and all other charges etc complete for all staff qtrs. as per direction of Engineer-In-Charge. |
| 69 | Providing and fixing Mirror of approved quality of size 450mmx600mm with beveled edge with 6mm thick hard board ground fixed to wooden cleats with Screws(brass),tools & plants and all other charges.etc complete for all staff qtrs. |
| 70 | Providing and fixing C.P Soap Dish of approved make |
| 71 | Providing and fixing Hook Hanger |
| 72 | Providing and fixing water supply fittings and specials of approved quality as per the following items including the cost of all labours, materials, tools & plants and all other charges etc.complete and specials (including flanges wherever require)should be of Jaquar(Essco) make/approved quality for staff qtrs. as per direction of Engineer-In-Charge. |
| 73 | P/Fixing C.P Brass 15mm dia Bib cock(Two Way) with flange -Jaguar(Essco) brand |
| 74 | P/Fixing Hand Jet spray with pipe of Jaguar |
| 75 | P/Fixing SS jalli circular (150x150) for nanhi trap of approved brand |
| 76 | P/Fixing PVC Nanhi Trap (75mm dia) of approved make |
| 77 | P/Fixing C.P Brass Shower (150x150mm) with arm 230 mm Long with all accessories( flange etc )-Jaguar (ESSCO/ approved) brand |
| 78 | P/Fixing 15mm dia connector pipe for wash basin/ Cistern of approved brand |
| 79 | Providing & fixing 25 mm dia valve |
| 80 | Providing and fixing(Make-Prince,Astral,Aashirwad ) on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including the cost of all material,labour,tools & plants,machinery,transportation(including lead & lift) etc. complete as per instruction & direction of Engineer-In-Charge. |
| 81 | 75 mm dia Single socketed pipe |
| 82 | 110 mm dia Single socketed pipe |
| 83 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 84 | clip for 75 mm dia pipe |
| 85 | clip for 110 mm dia pipe |
| 86 | Providing and fixing (Make-Prince,Astral,Aashirwad )on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion etc complete as per instruction and direction of EIC. |
| 87 | 75 mm coupler |
| 88 | 110 mm coupler |
| 89 | 75mm x 75mm x 75 mm - Single Tee |
| 90 | 110 mm x 110 mm x110 mm -Single Tee |
| 91 | 75 mm bend |
| 92 | 110 mm bend |
| 93 | 100mm valve |
| 94 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. including cost of labour, materials, scaffolding, transportation and all other charges as per instruction of Engineer-In-Charge. |
| 95 | On concrete work of water tank |
| 96 | on steel work of comp wall grill |
| 97 | FRP man hole cover |
| 98 | Polishing of Existing Kota Stone flooring,tread,Riser etc. including pointing,rubbing,polishing,washing etc as directed including the cost of all material,labour,tools & plants,machinery,transportation(including lead & lift ) etc. complete as per instruction & direction of Engineer-In-Charge. |
| 99 | Repairing of cracks for wall surface after making U/V-shape groove size of 25x25 mm and then priming the surface with integral crystalline slurry @ 0.05 kg per running meter and while the surface is tacky then filling the groove up to top edge with crystalline mortar @ 1.50 kg per running meter Once crystalline mortar is touch dry then finally applying two coats of integral crystalline slurry @ 0.05 kg per running meter per coat on treated surface etc complete, including cost of all labours, tools, plants, materials, curing, scaffolding, transportation and all other charges as per instruction of Engineer-In-Charge. |
| 100 | Plastering the exposed surface after removing damaged plaster surface of concrete including hacking of concrete surface) / masonry wall surfaces in cement mortar 1:4 (1 cement:4 fine river sand of 15 mm tk (neat finish if required) in one layer including making rough the smooth surface( and level the old & new surface), all as directed and (including making of patta, groove, rain drip wherever required all as per standard specification, including the cost of all all labours, tools, plants, materials, curing, scaffolding, transportation and all other charges as per instruction of Engineer-In-Charge. |
| 101 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge (for average thickness 75 mm) |
| 102 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. (Bars upto 12 mm diameter) |
| 103 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. |
| 104 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).25 mm average thickness in 2 layers. |
| 105 | Plastering the exposed surface of concrete(including hacking of concrete surface) / masonry wall surfaces in cement mortar 1:4 (1 cement : 4 fine river sand) of 15 mm tk (neat finish if required) in one layer including making rough the smooth surface |
| 106 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre as per direction of Engineer-In-Charge including the cost & supply of all labours/ painters tools, plants, scaffolding, transportation and all other charges etc.complete. |
| 107 | Supplying Chlorpyriphos/ Lindane emulsifiable concentrate of 20% chemical emulsion in sealed containers including delivery as specified. |
| 108 | Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration including cost of labours, materials, plants and all other charges as per instruction of Engineer-In-Charge. |
| 109 | Providing/Cutting and fixing 12 mm tk furniture ply (after removing existing damaged ply) of Century/equivalent brand for staff qirs furniture materials, carpenter/labour,tools &plants, transportation lead &lift and all other charges etc complete as per instruction and direction of Engineer-In-Charge. |
| 110 | Painting to Staff Qtr furniture (like cot table chair dinning table, T.Poi more coats of synthtic enamel paint of Asian/Berger brand (1rst quality of approved colour including the cost of all labours, materials(paint brush, sand paper etc),tools & plants, lead lift (removing & placing as per direction) and all other charges etc complete as per instruction & direction of Engineer-In-Charge |
| 111 | Wooden Cot |
| 112 | Meat Safe |
| 113 | Dining Table |
| 114 | wooden chair |
| 115 | T.Poi Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender