Tender For Manufacturing And Supply Of Carbon Steel Pipes
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Nov 2026
12 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Manufacturing And Supply Of Carbon Steel Pipes = Limited
BOQ
| Sl. No. | Item Description |
| 1 | Pipe, Carbon Steel, 10 NB, 17.1 OD, Sch. 40, 2.31 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 2 | Pipe, Carbon Steel, 10 NB, 17.1 OD, Sch. 80, 3.2 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 3 | Pipe, Carbon Steel, 100 NB, 114.3 OD, Sch. 40, 6.02 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 4 | Pipe, Carbon Steel, 100 NB, 114.3 OD, Sch. 80, 8.56 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 5 | Pipe, Carbon Steel, 125 NB, 141.3 OD, Sch. 40, 6.55 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 6 | Pipe, Carbon Steel, 125 NB, 141.3 OD, Sch. 80, 9.53 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 7 | Pipe, Carbon Steel, 15 NB, 21.3 OD, Sch. 40, 2.77 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 8 | Pipe, Carbon Steel, 15 NB, 21.3 OD, Sch. 80, 3.73 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 9 | Pipe, Carbon Steel, 150 NB, 168.3 OD, Sch. 40, 7.11 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 10 | Pipe, Carbon Steel, 150 NB, 168.3 OD, Sch. 80, 10.97 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 11 | Pipe, Carbon Steel, 20 NB, 26.7 OD, Sch. 40, 2.87 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 12 | Pipe, Carbon Steel, 20 NB, 26.7 OD, Sch. 80, 3.91 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 13 | Pipe, Carbon Steel, 25 NB, 33.4 OD, Sch. 40, 3.38 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 14 | Pipe, Carbon Steel, 25 NB, 33.4 OD, Sch. 80, 4.55 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 15 | Pipe, Carbon Steel, 32 NB, 42.2 OD, Sch. 40, 3.56 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 16 | Pipe, Carbon Steel, 32 NB, 42.2 OD, Sch. 80, 4.85 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 17 | Pipe, Carbon Steel, 40 NB, 48.3 OD, Sch. 40, 3.68 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 18 | Pipe, Carbon Steel, 40 NB, 48.3 OD, Sch. 80, 5.08 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 19 | Pipe, Carbon Steel, 50 NB, 60.3 OD, Sch. 40, 3.91 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 20 | Pipe, Carbon Steel, 50 NB, 60.3 OD, Sch. 80, 5.54 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 21 | Pipe, Carbon Steel, 6 NB, 13.7 OD, Sch. 40, 1.73 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 22 | Pipe, Carbon Steel, 65 NB, 73 OD, Sch. 40, 5.16 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 23 | Pipe, Carbon Steel, 65 NB, 73 OD, Sch. 80, 7.01 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 24 | Pipe, Carbon Steel, 80 NB, 88.9 OD, Sch. 40, 5.49 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 25 | Pipe, Carbon Steel, 80 NB, 88.9 OD, Sch. 80, 7.62 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 26 | Pipe, Carbon Steel, 200 NB, 219.1 OD, Sch. 40, 8.18 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 27 | Pipe, Carbon Steel, 200 NB, 219.1 OD, Sch. 80, 12.7 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 28 | Pipe, Carbon Steel, 250 NB, 273 OD, Sch. 40, 9.27 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 29 | Pipe, Carbon Steel, 250 NB, 273 OD, Sch. 80, 12.7 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 30 | Pipe, Carbon Steel, 300 NB, 323.8 OD, Sch. 40, 10.31 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. |
| 31 | Pipe, Carbon Steel, 300 NB, 323.8 OD, Sch. 80, 12.7 mm thk., As per ASTM A 106 Gr. B & ANSI B 36.10. Seamless, Standard Length 6 Mtrs, +/-1 Mtrs Tolerance. All other dimensional tolerances shall be as per ANSI B 36.10.To be supplied with (i) MTC (Material, Dimensional & Testing).(ii) Bearing heat marks on each length at one end with tracability to MTC. Both ends to be suitably blanked. (iii) Pipes shall be non-galvanised(iv) Pipes to be externally coated with primer. (v) Pipes should be suitable for hot bending, cold bending, machine bending & collar formation. If any defects arise during fabrication, the pipe length to be replaced free of cost. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender