Tender For Construction Of Reinforced Cement Concrete Ramp At Ophthalmology Building (G+2) For Fire Safety Measures Of M.K.C.G. Medical College And Hospital Berhampur Buildings.
Tender Value
90.12 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
1 days left
EMD
90200
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Reinforced Cement Concrete Ramp At Ophthalmology Building (G+2) For Fire Safety Measures Of M.K.C.G. Medical College And Hospital Berhampur Buildings.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation in foundation in all kinds of soil including hard moorum, stony earth mixed with boulders (except sheet rock and boulders requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated earth at places away from worksite with all leads and lifts including cost of all labour and T&P cess and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge.(excluding GST) |
| 2 | Carriage of earth by mechanic means with cost of all leads and lift upto 5.00 km including with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete (excluding GST) |
| 3 | Filling in foundation and plinth with SAND well watered and rammed in 23.5 (9'') thick layers with all leads and lifts with cost conveyance, cess and royalities of materials and labour with T&P with cost, conveyance for the work etc. complete as directed by the engineer in charge (measurement will be taken on finished compacted section only) (Excluding GST). |
| 4 | Cement concrete of proportion (1:3:6) in foundation and floors using 4cm (3.2) size clean hard black broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15cm (6) thick to the required level ramming watering and curing etc. complete including cost conveyance and royalties of all materials and labour with T&P required for the work etc. complete including dewatering if required.(excluding GST) |
| 5 | R.C.C. work (1:1.5:3) M-25 having minimum compressive strength in work test of 200kg/square meter in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and 516 using 12mm to 20mm size (20mm not to exceed 25%) hard black broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete, watering and curing for 4 weeks centring, shuttering and finishing the exposed surfaces smooth providing grooves to beads where necessary, providing drip cess and proper randy the joint with wall surface where necessary and providing fan hooks as per requirement and ceiling smooth to receive white washing or painting including cost, conveyance, royalties, of all materials and labour with T&P required for the work etc .complete in all respect but excluding cost of binding wire of 18 to 20 gauge and labour charges for straightening cutting bending binding and laying the grills and placing in proper position etc. complete as per specification and direction of the Engineer-in-charge. (excluding GST) COLUMN BASE |
| 6 | Plinth Bend |
| 7 | Column G.F |
| 8 | Column F.F |
| 9 | Column 2ND FLOOR |
| 10 | Beam G.F |
| 11 | Beam F.F |
| 12 | Beam 2ND FLOOR |
| 13 | Roof Slab G.F |
| 14 | Roof Slab F.F |
| 15 | Roof Slab 2ND FLOOR |
| 16 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge G.F |
| 17 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge F.F |
| 18 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of Engineer-in-charge 2ND FLOOR |
| 19 | FLY ASH BRICK (23cm x 11cm x 8cm) masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in F&P using clamp burnt bricks of 9 size having a crushing strength of not less than 50 kg per sqm including splays cutting, circular moulding chamfering and corbelling, watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) |
| 20 | FLY ASH BRICK (23cm x 11cm x 8cm) masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in Superstructure using clamp burnt bricks of 9 size having a crushing strength of not less than 50 kg per sqm including splays cutting, circular moulding chamfering and corbelling, watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) G.F |
| 21 | FLY ASH BRICK (23cm x 11cm x 8cm) masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in Superstructure using clamp burnt bricks of 9 size having a crushing strength of not less than 50 kg per sqm including splays cutting, circular moulding chamfering and corbelling, watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) F.F |
| 22 | FLY ASH BRICK (23cm x 11cm x 8cm) masonry in cement mortar (1:6) after immersing bricks for six hours in water before use in Superstructure using clamp burnt bricks of 9 size having a crushing strength of not less than 50 kg per sqm including splays cutting, circular moulding chamfering and corbelling, watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) 2 ND FLOOR |
| 23 | 12mm (1/2) thick cement plaster (1:6) finished smooth to outside/inside brick walls after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete. (excluding GST) G.F |
| 24 | 12mm (1/2) thick cement plaster (1:6) finished smooth to outside/inside brick walls after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete. (excluding GST) F.F |
| 25 | 12mm (1/2) thick cement plaster (1:6) finished smooth to outside/inside brick walls after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete. (excluding GST) 2ND FLOOR |
| 26 | 16 mm (5/8) thick cement plaster (1:6) finished smooth to inside surface of 9 thick brick walls/stone masonry after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete. (excluding GST) G.F |
| 27 | 16 mm (5/8) thick cement plaster (1:6) finished smooth to inside surface of 9 thick brick walls/stone masonry after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete. (excluding GST) F.F |
| 28 | 16 mm (5/8) thick cement plaster (1:6) finished smooth to inside surface of 9 thick brick walls/stone masonry after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete. (excluding GST) 2nd floor |
| 29 | 6mm (1/4) thick cement plaster (1:4) to R.C.C. surfaces finished smooth including close deep chipping and slurry treatment including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) G.F |
| 30 | 6mm (1/4) thick cement plaster (1:4) to R.C.C. surfaces finished smooth including close deep chipping and slurry treatment including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) F.F |
| 31 | 6mm (1/4) thick cement plaster (1:4) to R.C.C. surfaces finished smooth including close deep chipping and slurry treatment including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) 2 nd floor |
| 32 | Finishing to exterior wall surface with 2 (two) coats of weather seal coat over a coat of wall primer of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water, priming with approved new primer including cost of all material of all materials and labour with T&P etc. complete as per direction of Engineer-in-Charge G.F |
| 33 | Finishing to exterior wall surface with 2 (two) coats of weather seal coat over a coat of wall primer of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water, priming with approved new primer including cost of all material of all materials and labour with T&P etc. complete as per direction of Engineer-in-Charge F.F |
| 34 | Finishing to exterior wall surface with 2 (two) coats of weather seal coat over a coat of wall primer of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water, priming with approved new primer including cost of all material of all materials and labour with T&P etc. complete as per direction of Engineer-in-Charge 2nd floor |
| 35 | Supplying fitting and fixing of vitrified industrial tiles in floors 600mm x 600mm of approved shade make confirming to IS 13755 and treads and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) G.F |
| 36 | Supplying fitting and fixing of vitrified industrial tiles in floors 600mm x 600mm of approved shade make confirming to IS 13755 and treads and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) F.F |
| 37 | Supplying fitting and fixing of vitrified industrial tiles in floors 600mm x 600mm of approved shade make confirming to IS 13755 and treads and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the inside shade of the tile including rubbing, polishing etc. complete including cost conveyance of materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. (excluding GST) 2nd floor |
| 38 | CEMENT CONCRETE (1:2:4) in F&F using 12mm (1/2) size crusher broken hard black granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.(excluding GST) |
| 39 | Supplying, fitting and fixing of M.S. grills, grill gates, M.S. gates, garage door, Steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and design with cost of all labour, materials & T&P, sundries etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge G.F |
| 40 | Supplying, fitting and fixing of M.S. grills, grill gates, M.S. gates, garage door, Steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and design with cost of all labour, materials & T&P, sundries etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge F.F |
| 41 | Supplying, fitting and fixing of M.S. grills, grill gates, M.S. gates, garage door, Steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and design with cost of all labour, materials & T&P, sundries etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge 2nd floor |
| 42 | Enamel painting two coats with any approved paint over a coat of priming to WOOD work and IRON work including cost of the primer and sand papering polishing the surface with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.G.F |
| 43 | Enamel painting two coats with any approved paint over a coat of priming to WOOD work and IRON work including cost of the primer and sand papering polishing the surface with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors.F.F |
| 44 | Enamel painting two coats with any approved paint over a coat of priming to WOOD work and IRON work including cost of the primer and sand papering polishing the surface with cost conveyance cess and royalties of all materials and labour with T&P required for the work etc. complete in all respect in all floors. 2nd floor |
| 45 | Providing fixing and fitting of 110mm dia P.V.C. rain water pipe of approved quality and approved make confirming to I S with necessary bends and clamps etc.complete fixed to wall with nail etc as per the direction of Engineer in charge including cost of all material with taxes labour T&P etc complete.F.F |
| 46 | Providing fixing and fitting of 110mm dia P.V.C. rain water pipe of approved quality and approved make confirming to I S with necessary bends and clamps etc.complete fixed to wall with nail etc as per the direction of Engineer in charge including cost of all material with taxes labour T&P etc complete.2nd floor |
| 47 | EI-Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO/C&S) Group-C L.P- 80 F.P- C.B.P- |
| 48 | Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type ) |
| 49 | Supply and fixing of Modular switch ,Socket , T.V Socket and Telephone socket etc. 6Amp switch (Modular type ) |
| 50 | 6Amp socket( Modular type) |
| 51 | 16Amp switch (Modular type ) |
| 52 | 16Amp socket.(Modular type ) |
| 53 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/Polycab/L&T/Anchor/Havells/V-Guard/KEI/RHINO) 2 X 1.5sq.mm +1 X 1.5sqmm |
| 54 | 2 X 2.5sq.mm +1 X 1.5sqmm |
| 55 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 56 | Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required S/F of Chemical Earthing size of chemical earth bar 2mtr. Size of earth feet 3'X2\\"X9' chemical compound to be used 50 kg |
| 57 | Supply and fixing of 5Amp to 32A rating 240V \\"B\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) S/F of 16Amp DP MCB Hager/Legrand/C&S make M No.-408633 |
| 58 | S/F of 32Amp DP MCB Hager/Legrand/C&S make M No.-408636 |
| 59 | S/F of 63Amp DP MCB Hager/Legrand/C&S make M No.-408639 |
| 60 | S/F of 40Amp DP MCB Hager/Legrand/C&S make including box, |
| 61 | Supply and fixing of 4pole MCCB in cubicle pannel board S/F of 100AMP 25KA MCCB of Hager/Legrand/C&S Make with MS box including both side connections with all complete |
| 62 | S/F of 250AMP 50KA MCCB of Hager/Legrand/C&S Make with MS box including both side connections with all complete. |
| 63 | Supply and fixing of copper bus bar with suitable sheet metal enclosure on MS angle frame with proper grouting on wall including all connections. 100Amp TPN bus bar-300 X 32 X 3mm size |
| 64 | Supply and fixing of different type of fitting with lamp S/F of 20W 4' LED fitting Surface LED Light fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix) |
| 65 | S/F of 36W 2'X2' Surface/recessed on Ceiling LED fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix) |
| 66 | S/F of 18W 1'X1' Surface/recessed on Ceiling LED fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix) |
| 67 | S/F of 120W LED street light fitting (Make-Havels/Philips/Bajaj/ Crompton/Helonix) |
| 68 | S/F of 100W LED flood light fitting (Make-Havells/Philips/C&S/Crompton) |
| 69 | S/F of G.I. Street light Bracket with M.S. Clamp |
| 70 | Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard/V-Guard)S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark)Crompton Grave/Khaitan/Orient/Polycab/Bajaj/V-Guard/Usha |
| 71 | Exhaust fan 300mm |
| 72 | Supply of PVC/XLPE Aluminium armored cables ISI marked.(Make- Glowstar/ Polycab/Nicco/KEI/RHINO as per letter No-309 19.1.2011 of SEEC (R&B) Odisha) 6sq.mm 2core |
| 73 | 16sq.mm 4core |
| 74 | 70sqmm 3 1/2 core |
| 75 | 95sqmm 3 1/2 core |
| 76 | Cable laying on wall surface with steel shaddle 120sqmm to 400sqmm |
| 77 | Supply and fixing of fan regulator(Cona/ Anchor/ Usha/Bajaj)Electronics step type |
| 78 | Supply and fixing of extra down rod CAPACITOR |
| 79 | FIRE EXTINGUISHERS :- Providing & fixing ABC type (Dry powder type ) extinguishers. Including all accessories as per IS specification (IS :15683) Consisting of welded MS cylindrical body with discharge hose ,discharge valve ,suspension brackets,initial filling etc. complete as required., initial filling etc complete as required. Capacity - 6 kg . Make : Fireshiled/ Kanex/ Safex/ ceasefire/Flameklog |
| 80 | Providing & fixing Water based Carbon-di-oxide 4.5 ltrs. fire extinguishers as per IS specification consisting of welded MS cylindrical body ,squeeze lever discharge valve fitted with internal discharge tube ,30 cm long high pressure discharge hose ,discharge nozzle,suspension brackets,finished exteranally with red enemel paint and fixed to wall with brackets with rawl plug/dash fastners complete with initial charging. Make : Fireshield/Kanex/ Safex/ ceasefire/Flameklog |
| 81 | SITC of 2 kg capacity Eco friendly stored pressure type filled with HFC 236(Clean agent fire extinguisher having zero ozone depletion potential) clean agent fire extinguisher s with safety seal,pressure gauge, controlable discharge mechanism helium leak detection tested and confirming to IS:15683 complete with initial charge as required. Make : Fireshield/Kanex/ Safex/ ceasefire/Flameklog Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender