Defence Government Departments Closing in 6 days TDR #58398260

Tender For Balance Works Of Special Repair/Renovation Of Lsf Shop (Bldg No. 36) Inside Thriugh Risk And Construction

Issued by Government Departments · Ghaziabad, Uttar Pradesh
Tender Value
89.33 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
6 days left
EMD
1.58 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Balance Works Of Special Repair/Renovation Of Lsf Shop (Bldg No. 36) Inside Thriugh Risk And Construction

BOQ

Name of Work:- Balance works of special repair/renovation of LSF shop (Bldg no. 36) inside thriugh risk and cost.
Sl. No. Item Description
1Civil work items
2Dismantling asbestos cement (corrugated, semi-corrugated, etc) sheets in roof covering/cladding etc as directed by EIC.
3Dismantling plain or corrugated steel sheeting, any gauge, thickness from roof covering/cladding valley gutters/eaves gutters and ridges etc including deposit to store as directed by EIC.
4S & F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified and directed by EIC. Make- TATA/ JSW/SAIL.
5S&F 1mm thick plain, galvanised, mild steel sheeting in ridges, hips, valley gutter, drip and straight flashing ( length and girth as fixed) with grade of zinc coating 275. Make- TATA/SAIL/JINDAL
6S&F 2mm thick of fibre glass reinforced translucent corrugated sheeting with two corrugations profile side lap fixed with coach screw and washer in roof, wall etc as per direction of EIC.
7Fixing only pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified and directed by EIC. Make- TATA/ JSW/SAIL.
8M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 as directed by EIC.
9M&L for Cement concrete Type B 0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges or as directed by EIC.
10S & F MS Sheet/plate ( FE-410-Gde-E-250, quality A) for valley gutter, Eave Gutter or other section plane, channels, square cut or notched ( ordinary and counter sunk) forming holes, with rivetted, bolted or welded attachment, with all necessary requirement for fixing to drain pipe etc, sgape and size as directed by EIC. Make- TATA/ SAIL/JINDAL
11S&F of roof of trusses(framed work, trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (Fe 410-w(GDE-E-250) quality A. Make- TATA / JINDAL
12Dismantling mild steel of any description not otherwise provide for at any height (Damaged North light steel framing, roof member etc.)
13S & F of rolled mild steel sections ( FE-410-Gde-E-250, quality A) as in framing for cladding, glazing, north light and the like fixed with angle cleats and connecting plates, etc or as directed by EIC. Make- TATA/ SAIL/JINDAL
14S & F rough cast wired glass, 6.4 mm thick n exc 0.5 sqm and glazing with oil putty or with metal pins/clip etc in square/rectangle including dismantling/hacking out old broken glasses or as directed by EIC.
15M & L for Reinforced ready mixed concrete ( Design mix) 1:1:2 ( M-25) with 20 mm graded aggregates in foundation, including raft footings, foundation beams, plinth beams, base for column etc basement slabs, under rammed piles and mass concrete, unloading, transporting and laying at site for floor etc as directed by EIC.
16S & F of mild steel TMT bars 10mm dia under and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9mm dia or securing with clips as directed by EIC. Make- TATA/SAIL/JINDAL
17Demolition of Cement Concrete of any description and in any position not otherwise specifically provided.
18M & L for surface dressing n. exc 15 cm deep in hard soil.
19M&L for Hardcore of broken bricks gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.
20M&L for Cement concrete Type B 1 1:2:4 (20mm graded aggregate) for floor/plinth protection etc 70mm thick or as directed by EIC.
21Dismantling structural steel work including doors, gates but excluding frame truss etc at any height.
22S&F steel rolling shutters, thickness of laths 1.25mm with out balling, as specified including top cover , anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete gear operated type with beval gear box and crack handle as directed by EIC.
23M&L roughning surface of old concrete by floor by picking, sweeping clean and washing down with water to remove dust etc including removal of old APP and apply neat cement slurry 3 Kg/Sqm and 20mm thick cement plaster on concrete or brickwork surface including removal of old damaged APP membrane from roof.
24M&L for applying bitumen cutback evenly a priming/tack coat with bituminous primer at 10Kg per 10 sq meter as directed by EIC.
25M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. Make STP, Asian, Dr Fixit
26Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stonework and precast articles.
27M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4.
28M&L for taking down cement or cement lime plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc.
29M&L for rendering 15mm thick 1:4 cement plaster on fair faces of brick work or concrete surface and finished even and smooth without using extra cement.
30M&L for 3mm thick wall care putty on wall. Make JK, Birla, asian.
31M&L for applying two coats of 100% preminum acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( company Depot Tinted) with silocon additivies 21.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new surfaces. Make Asian-Ace, Berger-Weather coat, Nerolac-Excel approved by EIC.
32M&L for preparation of new wall surface apply two or more coat of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification Make: Nerolac - BEAUTY, Asian-TRACTOR EMULSION, Berger- BISON approved by EIC.
33M&L for preparation of old wooden surface any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint on prepared surface for door etc as directed by EIC. Make- Asian/Nerolac/Berger, or as approved by EIC.
34M&L for preparation of old iron surface apply one coat of red oxide and two coat of Aluminium paint on prepared surface for roof truss, purlin, steel column etc as directed by EIC. Make- Asian-Apcolite, Nerolac-HI gloss finish or as approved by EIC.
35Removing building materials etc to a distance of 1 Km or under, beyond the lead including in the rates, including loading, unloading and stacking at the destination as directed by EIC.
36Old asbestos cement sheet corrugated or semi corrugated from roof covering /cladding. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58398260
AUTHORITY Government Departments
TENDER VALUE 89.33 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Ordnance Factory
Work Description Tender for Balance Works Of Special Repair/Renovation Of Lsf Shop (Bldg No. 36) Inside Thriugh Risk And Construction
Basic Detail
Tender No GM/OFM/14/ENGG/2025-26
Bidding Type Tender
Location
City Ghaziabad
State Uttar Pradesh
Key Dates
Publish Date 05 Nov 2026
Submission Date 27 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 89.33 Lakhs
Tender Fee Ref. Documents
EMD 1.58 Lakhs
Exemption Not Available
Document List
7d92abc2-6e8c-471f-a719-0a939e7de40a.html
BOQ_346132.xls
PCINTEREGRITYPACT.pdf
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
html

7d92abc2-6e8c-471f-a719-0a939e7de40a.html

xls

BOQ_346132.xls

pdf

PCINTEREGRITYPACT.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender