Tender For Certain Repairs /Maintenance Including Replacement Of Unserviceable Parts Of Lifts At Mh Under Ge (Mh & Rh) Khadki
Tender Value
24.98 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
9 days left
EMD
49960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs /Maintenance Including Replacement Of Unserviceable Parts Of Lifts At Mh Under Ge (Mh & Rh) Khadki
BOQ
| Sl. No. | Item Description |
| 1 | Part-1 ( Comprehensive maintainence of lifts) |
| 2 | Routine maintenance and repair including renewal/replacement of electrically operated lifts with center opening auto door of Make – OTIS 20 pers passenger capacity (1360 Kgs) serving ground plus upper three floors (G+03) for a period of six month, with power operated door simplex collective control system including up keeping lifts and its accessories, electrical & mechanical system, safety devices and replacement of defective parts as mentioned hereinafter for the lifts installed at at MH PH-I bldgs. without attendant including carrying out the daily check and periodical services of fully automatic electric lift with power operated door duplex collective control system with replacement of unserviceable parts such as bearings, bushes, all type of shoes, headers, hangers, door cards, door locks, control cards, control connectors, hall push buttons, hall push button covers, rewiring of motors, welding of cracks/broken MS parts, repairs to door, safety edge working at any principle and any type of sensor or mechanical, safety lock, magnetic lock or contact, cop buttons, car position indicator, door sill, car door sill, necessary wiring and cable as per requirement for safe operation of lift cabin light fitting etc. complete to ensure safety and smooth operation of lift (Total 04 No’s lifts) |
| 3 | Routine maintenance and repair including renewal/replacement of electrically operated lifts with center opening auto door of Make – ECE 26 pers passenger capacity (1768 Kgs) serving ground plus upper four floors (G+04) for a period of six month, with power operated door simplex collective control system including up keeping lifts and its accessories, electrical & mechanical system, safety devices and replacement of defective parts as mentioned hereinafter for the lifts installed at MH PH-II bldgs. without attendant including carrying out the daily check and periodical services of fully automatic electric lift with power operated door duplex collective control system with replacement of unserviceable parts such as bearings, bushes, all type of shoes, headers, hangers, door cards, door locks, control cards, control connectors, hall push buttons, hall push button covers, rewiring of motors, welding of cracks/broken MS parts, repairs to door, safety edge working at any principle and any type of sensor or mechanical, safety lock, magnetic lock or contact, cop buttons, car position indicator, door sill, car door sill, necessary wiring and cable as per requirement for safe operation of lift cabin light fitting etc. complete to ensure safety and smooth operation of lift (Total 06 No’s lifts) |
| 4 | Routine maintenance and repair including renewal/replacement of electrically operated lifts with center opening auto door of Make – ECE Goods lift of capacity (2000 Kgs) serving ground plus upper four floors (G+04) for a period of six month, with power operated door simplex collective control system including up keeping lifts and its accessories, electrical & mechanical system, safety devices and replacement of defective parts as mentioned here in after for the lifts installed at MH PH-II bldgs. without attendant including carrying out the daily check and periodical services of fully automatic electric lift with power operated door duplex collective control system with replacement of unserviceable parts such as bearings, bushes, all type of shoes, headers, hangers, door cards, door locks, control cards, control connectors, hall push buttons, hall push button covers, rewiring of motors, welding of cracks/broken MS parts, repairs to door, safety edge working at any principle and any type of sensor or mechanical, safety lock, magnetic lock or contact, cop buttons, car position indicator, door sill, car door sill, necessary wiring and cable as per requirement for safe operation of lift cabin light fitting etc. complete to ensure safety and smooth operation of lift (Total 02 No’s lifts) |
| 5 | Note for Item No. 1.01 to 1.03 :- (i) One coat of synthetic enamel painting will be done for the lift equipment i. e. motor, gear box, control panel etc.(ii) This schedule does not include the items covered under Sch A Part - II (iii) All the items required to ensure the smooth and perfect working of the lifts other than those covered under Sch A Part - II shall be deemed to be included in this schedule.(iv) All expenditure for minor material & labour, T&P shall deemed to be included in quoted amount.(v) Major materials shall be measured and paid separately under relevant items of schedule 'A'.(a) Inspection of lift by government lift inspector for worthiness certificate during the currency of contract agreement within due dates including load testing as per lift act and submitting the worthness certificate all as directed by Engineer-in-charge for the lifts as per schedule for Sl No 1.01 to 1.03 Note for Item No 1.01 to 1.03 Inspection of Lifts shall be carried out by Govt lift inspector for worthness certificate during the current contract agreement within first 3 months including load testing as per Lift Act. |
| 6 | (b)The maintenance certificate to be duly signed by contractor and concerned Engineer-in-Charge for the lift as per schedule for Sl No 1.01 to 1.03 for every month,(c) The lift mechanic to collect the complaint register daily and on completion/rectification of complaint the register will be updated and signed. (d) Contractor should provide one Skilled Lift mechanic and one helper for 24 Hrs in cycle. Being hospital priority, If any lift gets stuck/blocked/unserviceable at site, within 10 min the lift mechanic should attend the complaint and the complaint to be resolved without any further delay. Incase the problem could not be solved, due to major breakdown / fault the matter to be informed to the contractor as well as to the MES authorities. |
| 7 | (e) Further if the Contractor failed to provide Skilled Lift Mechanic and helper at the time of any Lift Complaint a recovery @ of Rs.300/- per hour wef the time of lodging the complaint till completion of 24 hrs will be recovered from the Contractors dues. Also in case of any Lift gets repair for want of Spares the Contractor should provide the spare parts in time to make the Lift serviceable failing recovery shall be done from the Contractor as per clause. (f) The Contractor should keep all the spare parts intact for the above mentioned Lifts in the Lift Rooms.(g) The major spares and major fault and breakdown required during repairs for the servicibility of the lift will be measured and paid as in the schedule Part-II |
| 8 | PART - II ( Repairs / Major Spares for Item of Part - I) |
| 9 | New Micro Processor Control Panel for lifts make as per existing make |
| 10 | V3F Drive suitable for 15 HP motor make ;- as per existing make |
| 11 | ARD for lift motor of capacity 15 HP |
| 12 | Reed switch magnet assembly |
| 13 | Final & Terminal limit switchs |
| 14 | RCR set suitable for lift of make OTIS |
| 15 | Maintenance Box for lift |
| 16 | Display cable |
| 17 | Drive Stop pencil reed |
| 18 | Magnet Pata & Final Camp |
| 19 | Car door drive |
| 20 | Car door drive formator |
| 21 | Door sensor |
| 22 | UPS for lift motor of capacity 10 HP |
| 23 | UPS lift motor of capacity15 HP |
| 24 | Battery 12 V/ 17 AH for Lift |
| 25 | Battery 12 V/ 26 AH for Lift |
| 26 | Micro processor base card for control panel |
| 27 | Power supply card for control panel |
| 28 | Transformer 9 Volt for control panel |
| 29 | Transformer 15 Volt for control panel |
| 30 | Transformer 300 Volt 110 AC for control panel |
| 31 | Safty card |
| 32 | 8 Relay card. |
| 33 | 5 Relay card. |
| 34 | 4 Relay card. |
| 35 | Power relay card with relay |
| 36 | Bridge Card |
| 37 | Voice Card |
| 38 | Speaker for lift as per existing make |
| 39 | Contactor 25 Amps |
| 40 | Contactor 32 Amps |
| 41 | MCB 2 Pole 32 Amps |
| 42 | MCB 4 Pole 63 Amps |
| 43 | SPP Unit for control panel |
| 44 | COP Display card as per existing make |
| 45 | LOP Display card as per existing make |
| 46 | Limit Switch for up and down as per existing make |
| 47 | Inspection Box for lift |
| 48 | Junction Box for lift |
| 49 | Magnet Round |
| 50 | PVC Grips |
| 51 | Cable hanger (size as per existing) |
| 52 | Pencil Reed |
| 53 | Reed switch sensor |
| 54 | PVC copper cable 0.75 Sq mm single core Make:- Polycab |
| 55 | PVC copper cable 1.5 Sq mm single core Make:- Polycab |
| 56 | Auto door lock |
| 57 | Travelling Cable 12 Core 0.75 sqmm |
| 58 | PIT switch |
| 59 | Landing Push Button Plate wall mounting |
| 60 | COP Box wall mounting |
| 61 | Fan for lift cabin as per existing make |
| 62 | Blower for lift |
| 63 | Emergency Alarm |
| 64 | Gear Oil |
| 65 | Acralic Sheet for roof of each lift (complete set for one lift roof) |
| 66 | Floor Matting for each lift (thickness of mat not less than 4mm) |
| 67 | Car Guide rails 16 mm |
| 68 | Counter weight guide rail 9 mm |
| 69 | MS Auto door complete set |
| 70 | SS Auto door complete set |
| 71 | MS Car door header set |
| 72 | SS Car door header set |
| 73 | Gear Box unit set of capacity 10 HP |
| 74 | Gear Box unit set of capacity 15 HP |
| 75 | Governor set for lift control |
| 76 | Usha Martine wire rope 13 mm |
| 77 | Governor rope 08 mm |
| 78 | Bull Dog clip 13 mm |
| 79 | Bull Dog clip 8 mm |
| 80 | Attending breakdown / fault of lift with in the one hour from call around the call as when required upto the comfortable working of lift as the patients are travelling in the lift and up to the entire satisfaction of user complete all as specified and directed.Note:- (i) incase failure of attending major breakdown / fault within 01 Hour from intimation will be charged 1000/- panelty per hour to the contractor on account of delayed attending the fault.(ii) Each lift fault will be count as a seperate Job.(iii) Quotated rate shall be deemed inclusive of special tools required to attend the breakdown / fault(iv) Major Spares used in breakdwon well measured and paid seperately as supply only in relavant item of schedule.(v) Normal item like grease, oil, cotton west, nominal nut bolt used in breakdown / fault is inclusive in quotated rate. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender