Tender For Smart Perodical Services In Md Accn Under Age B/R-Ii Of Ge(N) Mamun.
Tender Value
25 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
15 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Smart Perodical Services In Md Accn Under Age B/R-Ii Of Ge(N) Mamun.
BOQ
| Sl. No. | Item Description |
| 1 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism with internal dust extraction system for clean environment certified by paint manufacturer) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\" /9\\" to make surface free from dust, loose paint etc complete all as specified and directed.Note: The work shall be got done through skilled workmen with proper masking on face to avoid enhaling of dust during execution of work. |
| 2 | M&L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old prepared surface of wall, sanding of putty surface with mechanical wall sander (having mechanical vaccum mechanism with internal dust extraction system for clean environment certified by paint manufacturer) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface smooth, clean, free from dust etc using following steps complete all as specified and directed:-Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction, mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations.Step 3 :- Allow 6-8 hrs time to dry the putty surface.Note: The work shall be got done through skilled workmen with proper masking on face to avoid enhaling of dust during execution of work. |
| 3 | M&L for one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio, applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 4 | M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, antifungal / anti algai properties in two coats @ 1.79 litre (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over primed surface with fully automatic airless spray machine of paint application with a flow speed of minimum 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in between 1st and subsequent coats of paint complete all as specified and directed. |
| 5 | Note for item No. 1 to 4 :-The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :-(a) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorised applicator through manufacturer of the materials like Exterior Emulsion paint, putty etc after approval by the GE. (b) The Contractor shall upload with the documents under cover I \\"Memoradum of Understanding\\" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected.(c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures.(d) Removing of Nails, making good holes, cracks etc(e) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary.(f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.(g) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint shall be cleaned to the entire satisfaction of Engineer-in-Charge.(h) Sample patch of 10Sqm shall be prepared considering all the items each of periodical, got the same approved from the GE before execution of work. No work shall be executed untill unless the sample patch is approved.(j) The work found not in confirmity to approved sample patch shall be rejected by the Engineer in Charge/ GE and shall be redone by the contractor without any extra cost. |
| 6 | M&L for cement plastering 15mm thick in in cemet mortar 1:4 including mixing of liquid water proofing compound for finishing 5mm layer as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and smooth without using extra cement incl taking down of existing plaster of any description complete all as specified and as directed by Engineer-in-Charge. |
| 7 | M&L for preparation of new plastered surface of external wall and chajjas, making surface smooth using sand paper, priming the surface with alkali resistance primer paint for external surface, applying two coats of cement base paint including curing complete all as specified & directed. |
| 8 | M & L for cleaning, breaking, loose concrete, changing of corressive reinforcement and filling plain cement concrete 1:1 1/2:3 type B-0 using 12.5mm graded aggregate at places like chajja ,sunshades ,roof projection ,fascia ,etc as per direction by E-in-Charge (the cost of scafoldings, formworks deemed to be included in the item)Note :- Reinforcement shall be measured and paid seperately. |
| 9 | M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas,roof ceilings, roof projections etc, including taking out peeled off plaster / concrete if required and making the line in true shape and finishing the surface without using extra cement complete all as specified and directed. |
| 10 | Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash,complete all as specified and directed. Please Enable Macros to View BoQ information |
| 11 | Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash,complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender