Tender For Bill Of Quantity For Beautification & Sustainable Development Work Of Ulung Waterfall
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Nov 2026
1 days left
EMD
49998
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khunti → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Bill Of Quantity For Beautification & Sustainable Development Work Of Ulung Waterfall
BOQ
| Sl. No. | Item Description |
| 1 | HYDTCost of drilling 200mmX165mmX125 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site.(a) 0.00 m upto 50.00 m depth below GL in rural areas. |
| 2 | (b) Above 50.00 m depth in Rural Areas |
| 3 | Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6 mm wall thickness includinig welding charges, cost of pipe etc. all complete job. (DWSD Item 58) |
| 4 | Supplying all materials, labour and tools & equipments for fitting & fixing 200 mm dia MS cap over casing pipe complete job. (DWSD Item 58) |
| 5 | Designing, Supplying, Installation, Testing & Commissioning with all tools & Parts of following Solar Photovoltaic (SPV) Solar Submersible D.C. Water Motor Pump Suitable for minimum 125mm x 115mm bore well as per MNRE Guideline with following specifications & accessories. |
| 6 | Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I(vide classification of soil item -B) |
| 7 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I |
| 8 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume) |
| 9 | Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 10 | Providing PCC M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I. 1:1.5:3 (1 Cement: 1½ coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 11 | 1:2:4 ( 1 Cement : 2 Coarse Sand (zone - III) : 4 graded stone aggregate 20mm nominal size ) |
| 12 | 1:3:6 (1 Cement 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) |
| 13 | Providing RCC M-200 in nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M.2.5to 3 including screening shuttering mixing cement concrete in mixer and placing in position vibrating striking curing and royalty all complete as per building specification and direction of E/I. |
| 14 | Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I. Tor steel reinforcement of 8mm dia rods |
| 15 | (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL Electrosteci Steels Ltd. Bokaro and Vizag (RINL)) |
| 16 | (b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL Electrosteel Steels Ltd. Bokaro and Vizag (RINE)) |
| 17 | (c) 16mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL Electrosteel Steels Ltd. Bokaro and Vizag (RINL) |
| 18 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 19 | Providing 150mm wide brick drain in cement morte (1:6) in foundation and plinth....do....do...., all complete as per specification and direction of E/I. for construction of road cutting portion- |
| 20 | Construction of soak pit 1.20 x 1.20 x 1.20 m filled with brick bats including s.w drain pipe 100mm diameter and 1.20 mtr longh....do....do...., all complete as per specification and direction of E/I. for construction of road cutting portion- |
| 21 | Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. 50 mm HDPE Pipe- |
| 22 | 25 mm HDPE Pipe- |
| 23 | Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end). |
| 24 | Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10 |
| 25 | Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. MJP 19-20 sec-I-IX sl no -2(i) 50 mm HDPE Pipe- |
| 26 | 25 mm HDPE Pipe- |
| 27 | Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post. DWSD Sl. 9K (including CP+OHC) |
| 28 | Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge. |
| 29 | (1) Elbow (a) 15 mm dia. |
| 30 | (2) Reducer Socket -(a) 20 mm dia. |
| 31 | (3) Nipple -(a) 15 mm dia. |
| 32 | (4) Plain Socket - (a) 15 mm dia. |
| 33 | Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram. |
| 34 | Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I. (50 mm dia and weight not less than 1.5 Kg. ) |
| 35 | Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I. (15 dia and weight not less than 400 Gm) |
| 36 | Supplying materials and labour for construction of 600x600x900mm stop cock chamber of brick masonry with 125 mm thick work of designation 768 in cement mortar (1:6) with 12mm thick cement plaster in C.M. (1.6) on inside only having 50 mm thick R.C.C. cover having 12 mm dia lifting rings, 2 nos, stop cock chamber will rest over 80mm thick P.C.C. (1:3:6) over one brick flat soling, including cost of earthwork, all complete job, as per approved design, specification and direction of E/I. |
| 37 | Cost of HDPE water storage Tank of approved quality with 2000 liter capacity |
| 38 | Providing designation 100A Brickwork with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:6) in foundation and plinth with approved quality of sand…………..do….as per building specification and direction of E/I. |
| 39 | Providing and laying 1st quality Ceramic glazed wall tiles thickness to be specified by the manufacturer in the walls over 12mm Cement Mortar (1:3) and jointed with -----Do ----- all complete as per building specification and direction of E/I. |
| 40 | Providing P.C.C. M-15with nominal mix of (1:2:4) in foundation with approved quality of stone MTR.al grade III (50 mm to 25mm size) clean coarse sand of F M 2.5 to 3 including screening, shuttering. mixing cement concrete in mixer and placing in position vibrating. skirting, curing, taxes and royalty all complete all complete as per building specification and direction of Engineer-in-charge. |
| 41 | Providing P.C.C. M-10with nominal mix of (1:3:6) in foundation with approved quality of stone MTR.al grade III (50 mm to 25mm size) clean coarse sand of F M 2.5 to 3 including screening, shuttering. mixing cement concrete in mixer and placing in position vibrating. skirting, curing, taxes and royalty all complete all complete as per building specification and direction of Engineer-in-charge. |
| 42 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 43 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 44 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 45 | Centering and shuttering including strutting, propping etc. and removal of form for vetical and horizontal fins individually or forming box louvers band facias and eavs boards Foundations, footings, bases of columns, etc. for mass concrete |
| 46 | lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 47 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 48 | Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards |
| 49 | Earth filling in foundation trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) |
| 50 | Applying stamping finish to the top surface of freshly laid plain/ reinforced cement concrete of specified grade in porticos, sidewalks, driveways, pool decks and open yards as per direction of the Engineerin-Charge. The process shall include the following: |
| 51 | Making Plinth protection 50mm thick of cement concrete 1,3,6(1) cement 3 coarse sand 6; graded stone aggregate 20mm nominal size over 75mm bad by dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth |
| 52 | Add for using extra cement in the items of design mix over and above the specified cement content therein |
| 53 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I |
| 54 | Providing designation 112mm thick reinforcement designtion 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:4) in supertructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening materials scaffoliding raking out joints to 15mm depth curing taxesand royalty (but excluding theb cost of reinforcement) all complete as per building specification and direction of E/I. |
| 55 | Tile brick masonry with common burnt clay F.P.S. (non modular ) tile bricks of class designation 10 in superstucture above plinth level up to floor V level in cement mortar 1:6 (1 cement :6 coarse sand ) |
| 56 | Extra for providing & placing in position 2 no 6mm dia ms bar every 3rd corse of half brick masonry |
| 57 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 58 | Kota stone slab flooring over 20mm thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab , inluding rubbing and polishing complete with base of cement mortar 1:4 (1cement : 4 coarse sand ) 11.26.1 25 mm thick |
| 59 | Kota stone slabs 20mm thick in risers of steps , skirting , dado and pillars laid on 12mm (average )thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slabs , including rubbing and polishing complete. |
| 60 | Extra for pre finished nosing in treads of steps of kota stone |
| 61 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, windowsills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing. curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of salb over 0.50 sqm |
| 62 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement 4 coarse sand) mixed with 2% integral water proofing compound |
| 63 | With average thickness of 120 mm and minimum thickness at khurra as 65 mm |
| 64 | Providing 12mm cement plaster (1.6)with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of EЛ. |
| 65 | Finishing walls with textured exterior paint of required shade:New work (Two or more coats applied @3:28 1tr/10 sqm) over and including priming coat of exterior primer applied.20kg/10 sqm |
| 66 | Providing two coat of oil bound/distemper of approved shade and make over a primer coat of cement primer over new surface including preparing the plastered surface by rubbing smooth widy pumice stone or fine sand paper applying putty wherever required scaffolding, washing floors and taxes all complete as peribonding specification and direction of E/I. |
| 67 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, including cost of scaffolding and taxes all complete AND Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 68 | Construction of Selfie Point |
| 69 | Wood Square Cast Iron Powder Coating Garden Bench, Capacity 4 Seater (Add 14.95% CP and OH) |
| 70 | Hdpe pole mounted outdoor dustbin(Add 14.95% CP and OH) |
| 71 | Providing 12mm, cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specifica tion and direction of E/. |
| 72 | Finishing wall with acrylic smooth exterior paints of required shade ( two or more coats including primer coats of exterior primer applied do - do- |
| 73 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment) |
| 74 | Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment). |
| 75 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm |
| 76 | Rough dressing the trenched ground including breaking clods |
| 77 | Fine dressing of the ground. |
| 78 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 79 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 80 | Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge |
| 81 | Plantation of Tress,Shrubs,and Hedge at site i/c watering and removal of unserveiceable material's as per direction of officer in charge (excluding cast of plant & water) Shrubs Plant |
| 82 | Hedge plant |
| 83 | Providing and Displaying Acalypha plant Different colour well developed,fresh and healthy with good foliage,multi branch 30 to 45 cm ht. in 20 cm size of Earthen pot/Plastic pot bushy plant as per direction of officer-in-charge. |
| 84 | Providing and displaying Cyprus golden plant well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht in 30 cm Earthen Pot as per direction of the officer -in-charge. |
| 85 | Providing and stacking of summer & rainy seasonal seedling at site of work well developed and healthy free from disease in pro tray and each pro tray having 100 Nos. as per direction of the officer-in-charge. |
| 86 | Sunflower Dwarf |
| 87 | Providing and Stacking of Bottle palm plant of height 270-300 cm bottom girth 40-50b cm well developed in big HDPE bags as per direction of the officer-in-charge. |
| 88 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. |
| 89 | Providing and stacking of Jasmine grandiflorum (chamell) of height 30 cm to 45 cm. in 20 cm size of Earthen pots/Plastic pots & as per direction of the officer-in-charge |
| 90 | Bush Rose in different colour 2 to 3 healthy branch 30 cm and above ht. well developed with 8 or more flowers/flower buds in 20 cm Earthen pot/Plastic pot as per direction of the officer-in-charge |
| 91 | Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge. |
| 92 | CLEARING GRASS AND REMOVAL OF RUBISH clearing grass and removal of rubish upto a distance of 50 m outside the periphery of the area |
| 93 | Carriage of materials (a) Cement |
| 94 | (b) Sand |
| 95 | (c) Stone chips |
| 96 | (d) Bricks |
| 97 | (e) Steel |
| 98 | (f) Structural Steel |
| 99 | (g) Horticulture |
| 100 | GST 18% |
| 101 | Labour Cess 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender