Tender For Repair /Replacements Of Doors And Windows Including Connected B/R Works Of P-301 At 4/1 Gr In The Area Of Age B/R-I Under Ge (West) Delhi Cantt-10
Tender Value
43.38 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
14 days left
EMD
86760
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair /Replacements Of Doors And Windows Including Connected B/R Works Of P-301 At 4/1 Gr In The Area Of Age B/R-I Under Ge (West) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but not exc 4 sq. m each. Complete all as spd & as directed by Engr in Charge. |
| 2 | Taking down chowkhat or frame not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame). Complete all as specified and as directed by Engr in Charge. |
| 3 | Repairs to Aluminium doors including taking down the shutter n.exc 2.00 Sqm each for repairs including replacement of defective parts of frame/shutters i.e. cleats, angle, screw, clips, gasket, rubber beadings, channels etc and refixing in the same opening complete all as specified and directed (Note : certain builders hardware such as door closer, floor spring, door stopper, tower bolt, sliding bolt and handle, mortice lock and glass if replaced will be paid seperately in respective items). |
| 4 | M&L for powder coated Anodised aluminium frame for doors, windows, ventilators, grill, partitions, sliding tracks, aluminium section for shutters suitable for two/three/four track window and aluminium section for two/three/four track sliding members etc. incl all necessary fittings and fixtures, jointing cleats, rubber packing etc complete all as specified and as directed. |
| 5 | S&F 5.5mm thick Sheet glass, selected quality and fixed to aluminium joinery in square n exc 0.5 sqm in each pane complete all as spd and directed. |
| 6 | S&F in repair 5.5mm thick Sheet glass, selected quality and fixed to aluminium joinery in square n exc 0.5 sqm in each pane by hacking out old glass (any thickness, size, quality or description) from wooden frames or Aluminium, stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as spd & directed. |
| 7 | S&F 5mm to 6mm thick toughned glass as in doors, windows, partitions, automatic doors and similar work including cutting to shape, drilling holes required. Complete all as specified and as directed. |
| 8 | S&F 4.0 mm thick figured glass / pin head type and glazing in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 9 | M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door, window, ventilator (Aluminium/steel/wooden) etc. complete all as specified & directed. |
| 10 | S&F 100mm butt hinges type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed. Complete all as specified and as directed. |
| 11 | S&F in repair 100mm butt hinges type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed. Complete all as specified and as directed. |
| 12 | S&F SS butt hinges medium weight 100mm size fixed with SS screws (ISI Marked) |
| 13 | S&F aluminium anodised powder coated barrel tower bolt, extruded section 200mm size complete all as specified and directed. |
| 14 | S&F in repair aluminium anodised powder coated barrel tower bolt, extruded section 200mm size complete all as specified and directed. |
| 15 | S&F aluminium anodised powder coated barrel tower bolt, extruded section 150mm size complete all as specified and directed. |
| 16 | S&F extruded aluminium alloy, fabricated type, Aluminium anodised powder coated handles for 150mm size complete all as specified and directed. |
| 17 | S&F in repair extruded aluminium alloy, Aluminium anodised powder coated handles for 150mm size complete all as specified and directed. |
| 18 | M&L for 4mm thick ACP sheet (Aluminium composite panel sheet) fixed in aluminium partion/door/window work including necessary jointing cleats, rubber beading, clips etc. complete all as specified and directed. |
| 19 | Providing and fixing factory made UPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and 5mm to 6mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose). |
| 20 | Providing and fixing factory made UPVC white color Sliding window Two/three track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5.5mm thick glazing with selected quality glass and SS wiremesh, aluminum track on bottom rail for two/three track sliding frame, wool pine for Sliding sash and interlock. Complete all as specified and directed. (Note: The unit rate quoted by contractor excludes cost of glass, wiremesh and includes all other connected accessories. Net opening will be measured for payment purpose). |
| 21 | Supply and fixing for factory made single extruded WPC (Wood Polymer Composite) solid door/window or other frames/chowkats of size 50 x 75mm comprising of vergin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood poder/rice husk/wheet husk) and non toxic additive etc all as per SSR park 2 ser No 08110A complete all as specified and as directed. |
| 22 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additive etc all as per SSR 2020 part-2 ser No 08105C, complete all as specified and as directed. |
| 23 | S&F chromium plated stanless steel curtain rod 25mm bore fixed with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 24 | S&F for drapery rod's side bulb stainless steel chromium plated suitable for 25mm bore curtain rod complete all as specified and directed. |
| 25 | S&F coated MS drapery rod's brackets as required complete all as specified and directed. |
| 26 | M&L for 20mm thick, granite (of any type) work (table rubbed and polished) in window-cills, cooking platforms and like in 15mm tihck cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed. |
| 27 | S&F aluminium body (extruded section) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified & directed. |
| 28 | S&F Solid PVC Wall Lining/penelling consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall paneling at distance of exceeding 30cm centre tor centre on verticl and at every end or joint of sheet in horizontal/vertical cinclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified & directed. |
| 29 | S&F framed work such as grills, grating etc. with ends of bars shouldered and /or riveted , or forged into spikes; framed guard bars; barred iron doors; ladders, framed balusters; walkways, railings, framework of water tanks and similar works conforming to Fe290. Gde-E-165 complete all as spd & directed by Engr in Charge. |
| 30 | M&L for Preparation of new or previously untreated surfaces of steel or steel base surface of any description not otherwise described over 10cm width or grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 31 | Demolition of brick work built in cement mortar or cement lime mortar of any description including quoins, arches, pillars etc. Complete all as specfied and as directed. |
| 32 | M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 mtr mean radius built in cement mortor 1:6 complete all as specified and as ditrected. |
| 33 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls, ceiling etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified and as directed. |
| 34 | M&L Rendering 12-15mm thick in Ready Mix Mortar on brick work or concrete surfaces of wall and finished even and smooth. Complete all as specified and as directed. Note : height of bilding up to 4 Storey |
| 35 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern to match the existing surfaces including scrubbing and washing, the top layer with brushes and water to expose the stone chippings. Complete all as specified and as directed.Note:- (Payments for providing grooves is included in this items and no extra payments will be done for this.) |
| 36 | M&L Rendering 10 mm thick in CM 1:3 on ceiling concrete surfaces finished even and fair without using extra cement complete all as specified and as directed. |
| 37 | M&L for preparation of newly or old plastered surfaces of walls or ceiling including priming the surfaces and applying 1.0 to 1.5 mm thick wall care putty to make the surface even and smooth. complete all as specified and directed.Note:- ( height of building up to 4 Storey) |
| 38 | M&L for applying two coats of oil bound over newly or old prepared wall or ceiling surfaces. Complete all as specified and directed. Note:- ( height of building up to 4 Storey) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender