Tender For Emergent Restoration Of Sluice Gates Consting Replacement Of 4 Nos. Draw Shutter, Hoisting Arrangement, Rubber Seal Etc. At Chingra G.P., Within Block-Khanakul, P.S.-Khanakul, Dist.-Hooghly.
Tender Value
12.89 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
14 days left
EMD
25799
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hooghly → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Emergent Restoration Of Sluice Gates Consting Replacement Of 4 Nos. Draw Shutter, Hoisting Arrangement, Rubber Seal Etc. At Chingra G.P., Within Block-Khanakul, P.S.-Khanakul, Dist.-Hooghly.
BOQ
| Sl. No. | Item Description |
| 1 | Taking out flap shutter of sluice gate including hoisting arrangement and refitting the same with new nut and blots where necessary.Up to 4.00 sq.m. |
| 2 | Taking out and refitting the same. |
| 3 | Supply and Installation of Gearing arrangement comprising of high precision Bevel Gear & pinion on existing hoist nut along with supply, fabrication of suitable MS frame, Shaft, Plummer Block fitted with gun metal bush, flange coupling and required keys etc as per following specification and detail. Bevel Gearing specification: No of Teeth of Pinion (Zp) = 20, Gear ratio = 3:1, Module = 6 No of teeth of Gear (Zg) = 60Material: HSLA steel Finish: High precision.Specification of other components:a) MS frame shall be assembled with existing MS pedestal, capable to withstand static & dynamic load of Actuators. Approx weight is 15 kg (Deviation in weight shall be adjusted through the rate available in USOR (M&E) during billing/payment).b) Shaft: 01 No, 30 mm Dia, length 450 mm approx., cut 08 Job per job with keyway, Matl-SS316.c) Plummer Block: 02 No, ID-50 mm, fitted with Gun metal bush of thickness 10 mm. Matl: Cast steel.d) Flange coupling: Hub flange coupling in pairs ID & OD = 30 mm & 100 mm respectively. Matl- Cast steel. |
| 4 | Cross Bandth :-Supply of empty cement polythene bags in good condition including stacking and carraige cost to site, labour charge for filling gunny bags/polythene bags with all kinds of earth or sand wet or dry including sewing mouth and stacking within a lead of 150 Mtr. and all lifts as per direction of the engineer in charge (Filled up weight not less than 30 kg.)(Measurement to be taken up in stacks), labour charge for dumping filled up gunny bags/Polythene bags in standing or flowing water with or without boats inclusive of placing in position with all leads and lifts complete as per direction of E.I.C. |
| 5 | Supplying to site empty cement polythene bags (capacity 50 kg) in good condition including stacking, incedental charges etc. all complete ( capacity 50 kg) |
| 6 | Labour charge forfilling empty cement gunny bag / polythene bag (capacity 50kg) with all kinds of earth (wet or dry), sand or agreegates (stone/ brick) and sewing as done in case of cement bag,( typing with a knot after filling will not be accepted), and staking within a lead of 30 metre as per direction of E.I.C.( cost is excluding the cost pf any types of filling materials) |
| 7 | Damping in position are sand filled gunny / polybags ( capacity 50 kg) within a lead of 30 metre inclusive of all lifts. |
| 8 | Removing earth/sand filled poly bags/gunny bags from the channel bed/slope and initially depositing the same near channel bank at bed/slope and initially depositing the same near channel bank at a place as directed by the enginner - in charge for measurement of bag & then disposing off the same at a distance not less than 150 metre from the channel site. |
| 9 | Bailing out water by pump including all leads and lifts and including making all arrangements for disposal, where continuous flow or seepage of water is encountered and rating of pumps and hours of operation is specifically ascertained as per direction of the Engineer-in-charge. |
| 10 | Fabrication, supply, erection and commissioning of embeded parts consisting of seal beam, Guide channel with all accessories for vertical gate of canal/river made of MS material consisting of angle, channel, beam, plate, flat, etc. conforming to IS : 2062 2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries, Manpower, Cutting, Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). |
| 11 | Seal beam Bottom |
| 12 | Guide channel/Guide path/Top seal pat |
| 13 | Supply and fabrication of new stainless steel plate/flat (AISI ‐ 304) of suitable size on seal beam / roller track/ slide track/ side seal seats/ top seal seat by welding (SS) as per direction of the Engineer‐in‐charge including cost of Materials, Machinaries, Manpower, Cutting, Aligning, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification. |
| 14 | Fabrication, Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 - 2000/Latest Revision consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle, channel, beam, plate, flat, etc. conforming to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries, Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting).Width of Gate shuteer size upto 2 metre |
| 15 | Cost for supplying and fitting fixing of Flat rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/ equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate shutter as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer. |
| 16 | 100mm x 14 mm. |
| 17 | Cost for supplying and fitting fixing of angle type rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/ equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for dismantling & fitting fixing,cost of rubber seal, hire charges of tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer. |
| 18 | 75x75mm x 14 mm thick |
| 19 | Cost for supplying and fitting fixing of bulb/musical node/J‐ type rubber seal (Make : Universal Moulders & Engineer/Popular Rubber Works (Pvt) Ltd/SAB Industries/Unique Polymer Works/equivelant approved make conforming to lS : 11855 -2011/Latest Revision) for different types of gate as per direction of E.I.C. The cost includes cost of man power employed for fitting fixing, cost of rubber seal, hire charges of tools & tackles, caffolding and safety equipments etc including carriage loading & unloading but excluding supply of ms clamp/ flat plate, bolts, nuts and washer.Solid bulb size- 40Ø 140 X 16 mm |
| 20 | Supplying of M.S flat for clamping Rubber seal with hole as per direction of EIC. |
| 21 | Supplying of M.S bolts with nut for clamping Rubber seal as per direction of EIC. |
| 22 | Supply, installation, testing and commisioning of following items for hoisting system and gear box as mentioned below as per direction including cost of Materials, Machinaries, Manpower, Cutting, Machining, Aligning, Anchoring, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting) |
| 23 | Shaft /Pin with key ways made of SS-304. |
| 24 | Design, drawing, fabrication, supply, erection, testing and commissioning of structural steel hoist bridge, Rail support Girder(for Gantry crane) & cat walk/walkway bridge on dam/barrages and canal/rivers consisting of foundation bolt assembly, base plate, columns, beams, bracings, stiffeners, ties, chequered plate covering, hand railing, staircase etc., with all accessories including cost of all materials, machinery, labour, welding, finishing, etc., complete as per specifications and drawings with all leads and lifts (without painting ). |
| 25 | Servicing of headstock assembly i.e. opening the hand wheel from screw rod, including opening the thrust bearing from top and bottom thrust plate of bearing housing, nut, coller etc and cleaning all the components with the help of Kerosine and emery paper and re-fitting the same including changing necessary nuts & bolt after greasing the thrust bearing if Ok otherwise replaced by new one (excluding the cost of bearing, supplied separately) and fileing work if required for fixing to the pedestal upto the satisfaction of E.I.C. The cost includes cost of materials, man power employed, kerosene, grease, consumables like emery paper, cloths, blots & nuts, hire c h a r g e s o f tools & tackles etc. |
| 26 | Surface cleaning of metal surfaces by chemical cleaners and then by hand with emary paper, wire brush and power tool cleaners and removing dust and preparation o f surface including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts. |
| 27 | Painting of embedded parts, all types of gates, stoplogs and barscreen/gratings etc on prepared surfaces with one coat of inorganic zinc silicate primer (airless s p r a y preferred)70+/ - 5 micron and two super coats with a total thickness of 300 microns (each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns) including cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. |
| 28 | Supplying, fitting & fixing of M.S fabricated pedestal stool of suitable size, consisting of bottom plate, top plate, four nos legs etc febricated with suitable sizes m.s plate, m.s angle conforming to I.S 2062 of latest revision and as per approved drawing & direction of Engineer in charge. The cost includes cost of materials, man power employed for dismantling and fitting fixing, civil works consumables like cutting tools, gas, oxygen, welding rod, anchor bolt of required size, hire charges of machineries, like gas cutting set, welding set, tools & tackles etc including carriage loading & unloading. |
| 29 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75mIn ground floor including roofAbove 150 mm. thick |
| 30 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevent IS code. Pakur varity |
| 31 | Supplying, fitting & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading. |
| 32 | Supplying, fitting & fixing of screw rod having square thread of 1.5/2 T.P.I, Material bright steel [EN‐8/EN9/forged Cl‐4 (45C8) as per IS :1875 1992/latest Revision]. dia and thread length as required and providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as required as per direction of Engineer‐In ‐ Charge. The cost includes cost of material man power employed, consumables like cutting tools, emery paper, cloths, hire charges of machineries, tools & tackles, grease, mobil etc including carriage loading & unloading as per direction of Engineer in charge.Upto length Above 3 metre up to 5 mtr. |
| 33 | Supplying, fifling & fixing M.S fabricated wheel in the screw hoisting system for lifting or lowering the draw shuter.The wheel consisting of suitable size ms hub to accomodate any size of G.M/C.I nut. The rim and four nos arm of wheel are made of 25mm. to 36mm. dia m.s rod complete as per direction of the Engineer-in-charge. The cost includes cost of materials, man power employed for dismantling and fiting fixing, consumables like cuting tools, welding rod, hire charges of machineries, like bending machine, lathe machine, grinding machine welding set, tools & tackles etc including carriage loading & unloading.Upto 60 cm dia. MS wheel. |
| 34 | Supply of bearings, Bearing no.51112 (SKF)(Thrust bearing). |
| 35 | Supplying, fitting & fixing of screw hoisting arrangement made of MS bottom plate, top plate, collar with necessary holes on base plate and top plate to accommodate thrust bearing of suitable size as per approved drawing & design and as per direction of Engineer in charge. The cost includes cost of ms plate as per IS : 2062 -2011/ latest revision, man power employed for dismantling and fitting fixing, consumables like cutting tools, bolt & nuts of required size, hire charges of machineries, like lathe/shaping machine, grinding machine, drilling machine, tools & tackles etc including carriage loading & unloading but excluding the cost of lifting Nut/Bush, thrust bearing & wheel supplied separately. |
| 36 | Supplying, fitting & fixing Cast Iron Nut as per requirement having 1.5/2 T.P.I square thread and fitting for screw gearing arrangement, parfectly metting with the screw rod/gear rod for lifting the draw shutter as per direction of Engineer In Charge. The cost includes cost of materials, man power employed, consumables like cutting tools, emery paper, cloths, hire charges of machineries, tools & tackles etc including carriage loading & unloading. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender