Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #58395277

Tender For Periodcial Services Using Smart Periodical Methodology In Otm And Md Accn Under Ge Saugor

Issued by Statutory Bodies & Commissions/Committees · Sagar, Madhya Pradesh
Tender Value
20 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Periodcial Services Using Smart Periodical Methodology In Otm And Md Accn Under Ge Saugor

BOQ

Name of Work:- PERIODCIAL SERVICES USING SMART PERIODICAL METHODOLOGY IN OTM AND MD ACCN UNDER GE SAUGOR
Sl. No. Item Description
1M&L for complete removal of existing treatment using mechanical scrapping machine and applying two coats of cement base wall care putty by fully automatic airless spray machine in two coats @ 1Kg/Sqm (0.5Kg in each coat) on of wall/ceiling surfaces as preparatory work to painting including removing of nails, making good holes, cracks etc cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger
2M&L for applying two coats of acrylic exterior emulsion paint over and including one coat of exterior primer on prepared surfaces of wall by fully automatic airless spray machine complete all as specified and directed.Make : Asian (Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions
3M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new plastered surface of wall/ceiling by fully automatic airless spray machine as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Burger
4M&L for two coat of acrylic distemper paint over and including one coat of exterior primer by fully automatic airless spray machine on prepared surfaces of wall/ceiling complete all as specified and directedMake : Asian (Apcolite)/ Berger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass, joinery, electric fitting, etc after painting work with entire satisfaction of Engg-in-charge.
5Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed
6M&L for one coats of white wash on old decorative wall surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed.
7M&L for two coats of white wash on old decorative wall surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed.
8M&L for two coats of white wash on old decorative ceiling surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed.
9M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces of wall, beam/ chajja /facia etc, finished surface even and fair without using extra cement complete all as specified and directed.
10M&L for one coats of Distemper oil emulsion on old decorative wall surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed.
11M&L for two coats of Distemper oil emulsion on old decorative wall surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed.
12M&L for one coats of Plastic emulsion paint on old decorative wall surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed.
13M&L for one coats of synthetic enamel paint on old wooden or wood based surfaces of any description, not otherwise descri-bed, over 10cm width or girth including preparation of surfaces complete all as specified and directed.
14M&L for one coats of synthetic enamel paint on old Steel and iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth including preparation of surfaces complete all as specified and directed.
15M&L for one coats of Exterior Acrylic emulsion paint on old decorative wall surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed.
16M&L for Two coats of Exterior Acrylic emulsion paint on old decorative wall surfaces including preparation of surface by brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc complete all as specified and directed.
17M&L for writing/Re-writing of letters or figures (Block, Roman, Italic or Indian) with thick enamalied paint, height of letters exceeding 15cm but not exceeding 30cm, complete all as specified & directed.
18M&L for writing/Re-writing Stops, commas, short lines, dashes, hyphens, brackets, etc. with thick enamalied paint complete all as specified & directed.
19NOTE for item No. 1 to 4(i) The contractor will submitte a triparty Memorandum of understanding (MOU) with any one manufacturer of paint given in CA(ii) The entire work shall be got executed in strict supervision of Manufacturers authorized Engineer/ representative who will ensure use of original premium quality paint/primer in adequate quantity as per coverage area of paint/primer and produce purchage vouchers/ Invoice for full quantity of paint, primer and putty.(iii) Removal of existing treatment from old decorative wall/roof projections including facia, cornices etc shall be scrapped using mechanical sander (having mechanical vacuum mechanism and RPM not less than 1500), with sanding pad of 240 Grit or above by skilled labour.(iv) Putty powder and water shall be mixed in putty mixer having mixing capacity of min 2.5 Kg putty per minute. Weather shall be mixed as per manufacturer instructions.(v) Each coat of putty shall be applied using fully automatic airless spray machine for putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. The time interwell between two subsequent coats shall be min 6 to 8 Hours.(vi) Each coat of primer and paint shall be applied using fully automatic airless spray machine for paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 m. the accessories for applying emulsion should be able to spray in hard to reach areas and penetration of emulsion on the surface using auto roller for making the surface uniform. The time interwell between two subsequent coats shall be min 6 to 8 Hours.
20M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer by fully automatic airless spray machine on prepared surfaces of wall/ceiling complete all as specified and directedMake : Asian (Apcolite)/ Berger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass, joinery, electric fitting, etc after painting work with entire satisfaction of Engg-in-charge.
21M&L for applying two coats of acrylic ditemper paint over and including one coat of exterior primer on prepared surfaces of wall by fully automatic airless spray machine complete all as specified and directed.Make : Asian (Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58395277
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 20 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Periodcial Services Using Smart Periodical Methodology In Otm And Md Accn Under Ge Saugor
Basic Detail
Tender No GE/SGR/TOK-95 OF 2026-27
Bidding Type Tender
Location
City Sagar
State Madhya Pradesh
Key Dates
Publish Date 05 Nov 2026
Submission Date 26 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 20 Lakhs
Tender Fee 500
EMD 40000
Exemption Available
Document List
BOQ_894574.xls
cd59e1be-eda1-4021-aa10-c89de8fb91b8.html
Tenderdocuments1634TOK95.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_894574.xls

html

cd59e1be-eda1-4021-aa10-c89de8fb91b8.html

pdf

Tenderdocuments1634TOK95.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender