Tender For Work Of Electrical Utility Shifting (33 Kv, 11 Kv, Lt Line & T/F) At Lal Bangla -Sanigwan Marg Under Kanpur Kesco..
Tender Value
73.24 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
18 days left
EMD
73300
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Of Electrical Utility Shifting (33 Kv, 11 Kv, Lt Line & T/F) At Lal Bangla -Sanigwan Marg Under Kanpur Kesco..
BOQ
| Sl. No. | Item Description |
| 1 | Description of work |
| 2 | Loading, Carriage and unloading of poles from store to work site or vice-versa. |
| 3 | Erection of Double pole structure by digging of pit by hydra. |
| 4 | Erection of TRI pole structure by digging of pit by hydra. |
| 5 | Erection of FOUR pole structure by digging of pit by hydra. |
| 6 | Erection of new S.T. Pole/repaired size 9.0 Mtr. To 13.00 Mtr. With the help of crane including of Pit back filling and ramming. |
| 7 | Grouting of pole with cement brick ballast and coarse sand as per standard specification. |
| 8 | Making plinth of single pole of 400 mm dia, 600 mm height (200mm underground) with C.C. in ratio 1:4:8 of cements, stone ballast and coarse sand including cost of materials. |
| 9 | Painting of S.T. pole with one coat of red oxide and two coats of Aluminium Paint including cost of Ist Class enamel paint. |
| 10 | Earthing of supports by sagging of M.S. earthing rod 20mm and connecting with earth wire and related works as per standard specifications. |
| 11 | Dismentalling of Damaged S.T. Pole of very Critical Position with the help of crane after removing all the accessories from damaged pole and its all related work including digging of pit or by cutting with gas cutter. |
| 12 | Fixing of stay rod and its erection and grouting by fitting of stay clamp. Stay wire and its proper binding and tightening etc. |
| 13 | Fabrication/modification of MS Item as per requirement of site. |
| 14 | Fixing of MS Channel (100x50x6) mm 2.4 / 2.8/ 0.35 mtr. Long/T-off channel. |
| 15 | Dismentalling of binding wire from insulators and loosening of the ACSR Dog conductor on each pole then lowering down the ACSR Dog conductor & rolling into bundles. |
| 16 | Loading, Carriage and unloading of ACSR Dog Conductor from store to work site or vice-versa. |
| 17 | Laying, Stringing & Tensioning of ACSR Dog Conductor/cover dog and for making jumpers on riser. |
| 18 | Taking out 33kv and 11 kV 3x70 to 3x300 XLPE Cable/LT Cable except service cable from cable drum before laying and transportation of the cables from store to work site or vice-versa. |
| 19 | Laying of 33 KV/11 KV 3x300/400/185 sq.mm XLPE Cable in Air Pole to Pole./POLE TO TRANSFORMER/SECTION POLE ABOVE GI PIPE |
| 20 | Lyaing AND FIXING of G.I. Pipe/MS Pipe/ Old & Used Pole Pcs |
| 21 | Laying of cable in above G.I. Pipe/Old & Used Pole Pcs |
| 22 | Making 33KV/11KV Making straight through,O/D,I/D joint by contractor |
| 23 | Mounting of cable box on pole/ cable support structure / in VCB |
| 24 | Mounting of 33 kV / 11kV Pin Insulator |
| 25 | Erection of 33kV /11 kV Disc Fitting with disc Insulator |
| 26 | Dismantling of M.S. Channel/X-arm/Guarding angle |
| 27 | Erection of Bracing set |
| 28 | Chopping of tree branches lying in the route of existing line touching the tree branches to the phase line conductor making fault to the feeder, for 3” to 18” dia or as per requirement of site. |
| 29 | Fixing of danger board on erected poles |
| 30 | Fixing of G.I. Barbed wire |
| 31 | Loading, carriage and unloading of Aearial Bunched Cable from store to work site or vice-versa. |
| 32 | Laying of LT Aerial Bunched Cable including fixing suspension clamp with eye hook , Dead end clamp with Eye hook on erected Steel Tubular Pole etc. |
| 33 | Dismantling of L.T./H.T. A.B. Cable and rolling into bundles |
| 34 | Opening of H.T. Jumpers from the existing 3 Phase 3 Wire H.T. O.H. line for erection work. |
| 35 | Making of H.T. Jumpers from 3 Phase 3 Wire H.T. O.H. line for erection work. |
| 36 | Opening of L.T. Jumpers from the existing 3 Phase 4 Wire L.T. O.H. line for erection work. |
| 37 | Making of L.T. Jumpers from 3 Phase 4 Wire L.T. O.H. line for erection work. |
| 38 | Making HT/LT Section points by brackets, clamps & insulator, Tightening of Line, binding of conductor & proper connection. |
| 39 | Mounting & Erection of single phase distribution box of AB Cable with Piercing Connector, L.T. Bare Neutral Connector, Alu. Lug 25 mm, L.T. Cable 1x25 mm etc. |
| 40 | Mounting & Erection of three phase distribution box of AB Cable with Piercing Connector, L.T. Bare Neutral Connector, Alu. Lug 25 mm, L.T. Cable 1x25 mm etc. |
| 41 | Opening and reconnection of consumer service connections after replacement of line/ poles etc. |
| 42 | Re-arrangement of 33 KV/11KV existing line / Cables |
| 43 | Re-sagging of conductor, on old line after erection of pole, binding of conductor etc. |
| 44 | Connecting of newly erected network with KESCo mains including testing, commissioning and energization of the same completely. |
| 45 | Erection of TPMO |
| 46 | Erection of LT Circuit 500V/500A |
| 47 | Erection of DO Fuse set |
| 48 | Making Plinth of Distribution Transformers |
| 49 | Shifting of Distribution Transformers |
| 50 | Fabrication & erection of Distribution T/F Fencing |
| 51 | Deep Bore GI Pipe Earthing including supply Size GI Pipe 40mm dia B-Class 80 feet long with socket cutter, earth wire 7/14 SWG, Nut & bolts with connection of pipe to distribution T/F Neutral or Body all material shall be provided by contractor with cost of all material. |
| 52 | Laying of LT XLPE 1x630/1x400 sqmm cable T/F to ACB |
| 53 | Carriage of all concerning stock material from KESCo Store to site or vice-versa including Cable Drum. |
| 54 | The following materials will be provided by contractor |
| 55 | MS Clamp 4½ (50x6 mm) |
| 56 | MS Clamp 5½ (50x6 mm) |
| 57 | MS Clamp 6½ (50x6 mm) |
| 58 | MS Clamp 7½ (50x6 mm) |
| 59 | MS Clamp 8½ (50x6 mm) |
| 60 | Bracing clamp 6½ |
| 61 | Bracing clamp 7½ |
| 62 | Bracing clamp 8½ |
| 63 | C.I. Packing 4½ |
| 64 | C.I. Packing 5½ |
| 65 | C.I. Packing 6½ |
| 66 | C.I. Packing 7½ |
| 67 | C.I. Packing 8½ |
| 68 | ALLUMINIUM PAINT |
| 69 | RED OXIDE PAINT |
| 70 | X ARM HOLDING CLAMP |
| 71 | Stay Clamp |
| 72 | LT POLE CLAMP' |
| 73 | DISTRIBUTION BOX 1PH CLAMP |
| 74 | DISTRIBUTION BOX 3PH CLAMP |
| 75 | EARTHING CLAMP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender