Agriculture Government Departments Closing in 6 days TDR #58394327

Tender For Repair And Painting Of The Office Building Located Within The Food Grain Complex At The New Mandi Site In Baraut, Along With The Repair And Painting Of The Entrance And Exit Gates And The Boundary Wall At Nmy Badaut

Issued by Government Departments · Baghpat, Uttar Pradesh
Tender Value
14.70 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
6 days left
EMD
1.47 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Baghpat → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Repair And Painting Of The Office Building Located Within The Food Grain Complex At The New Mandi Site In Baraut, Along With The Repair And Painting Of The Entrance And Exit Gates And The Boundary Wall At Nmy Badaut

BOQ

Name of Work:- uohu e.Mh LFky] cMkSr esas [kk|kUu ifjlj esa fufeZr dk;kZy; Hkou dh ejEer o jaxkbZ&iqrkbZ] izosk }kj o fudkl }kj o xsV o pgkjnhokjh dh ejEer ,oa jaxkbZ&iqrkbZ ds dk;ZA
Sl. No. Item Description
1Scraping old white or colour wash including disposal of refuse as directed by the Enginner in charge with in a 60mt SI NO 708
2Dismentling of existing plaster including disposal of refuse as directed by E/ I .(S.I.No-706)
312 mm thick plaster with cement and appro-ved coarse sand mortar in 1:4 over brick 1 cm including supply of all materials, labour T & P etc. required for proper completion of the work. SI NO 584A
4Providing wall putty with approved quality material of beager/J.K. birla or similar make 2 coat SI NO 662 New item
5Providing wall putty on old surface with approved quality material of beager/J.K. birla or similar make 2 coat SI NO 662 New Item
6Finishing wall with two coat of weather coat of approved quality on superviously surface with this paint give an even shade including supply of all materials labour T&P etc si. New Item page no 23 SI No 662 New Item
7Distempering (Two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even cement primer of approved brand and manufacture such as berger, J&N shalimar,asian paint after thoroughtly brushing the surface free from mortar dropping and other foreign matter and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all mateirals lobour tools & plants etc. required for proper completion of the work. si no 649+650
8Supply and fixing Galvanized Mosquitos proof heavy quality S.S Wire gauge heavy quality over windows and including supply of teak wood batten 8 cm x 1cm. (3''x3/8'') flat iron 25 mm x 4mm and including supply of necessary screws all materials, labour, Tools & Plants etc. required for proper completion of the work SI No 455
9Supply and fixing 32 mm. thick Commercial flush door shutters conforming of I.S. 2202 Part-1(1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles and springs (excluding cost of fitting) SI No. 470A
10Approximate cost of ISI marked oxidized iron fitting with screws for door & windows etc. (for estimating purpose only) SI No 473
11Painting or varnishing work in small areas or new wood work withone coat (upto one square metre) ready mixed priming paint and 2 coat of superior quality ready mixed paint or varnish including supply of all materials. Labour tools & plants etc required for proper completion of the work paint to be used should confirm the ISI no 103-1950 S.I.No. 641+642
12Painting or varnishing Two Coat on Previously Painted old wooden or iron work including supply of all materials. Labour tools & plants etc required for proper completion of the work paint to be used should confirm the S.I.No. 642+643
13M-150 brick work in 1:4 cement and c.sand mortar for one brick thick wall in superstructure including supply of all materials labour T&P etc. required for proper completion of the work si no 305A+310+310a
14Providing and fixing water closet squatting pan (Indian type W.C pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White glazed earthen ware (Indian type)/Neycer W.C Pn 580 mm Dia.SI No 21.12
15Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked (Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge. SI No 21.11
16Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. SI No 21.25
1715 mm dia providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stablity for hot & cold water supply, Including all CPVC plain & brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed Work, including cutting chases and making good the wall etc. SI No 17.0
1820 mm dia providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stablity for hot & cold water supply, Including all CPVC plain & brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed Work, including cutting chases and making good the wall etc. SI No 17.1
1932 mm dia providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stablity for hot & cold water supply, Including all CPVC plain & brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed Work, including cutting chases and making good the wall etc. SI No 17.2
20Providing and fixing C.P. Brass bib cock of approved quality confirming to Is 8931 SI No 21.07
2115 mm providing and fixing brass stop bib cock ISI marked approved quality as per direction of Engineer-in-charge. SI 21.04 B 20 mm nominal bore SI No 19.0
2220 mm providing and fixing brass stop bib cock ISI marked approved quality as per direction of Engineer-in-charge. SI 21.04 B 20 mm nominal bore SI No 19.1
23Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, Including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. SI 19.02 SI No 730a 100 mm diameter SI No. 730(a)
24Renewing panes of glass in door, window & ventilators or fixing in the new work with 3 mm, thick glasspanes fixed with brads & putty including supply of all materials, labour, tools & Plants, required for proper completion of work. SI No 806
25Providing and laying \\"brick coba\\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement ad coarse sand mixed with water proffing compund spreading cement slurry mixed with aerelic cement concrete water proffing compund filled gaps of coba & top of coba mortar mixed with water proofing compund in 1:4 cenent and coarse sand mortar finished smooth & top mashed false squarte 30 cm X cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and juction and corner shall be rounded by vrick ballast cement and coarse sand masonary coba with top finshed plaster mixed with acetic water proofing compund @ 2% by weight & including S/o all material, labour, T&P etc. complete for proper completion of work. (New Item)
26Supply and fixing 6mm (1/4\\") china white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and tools and plants. SI No. 628
27Supplying and fixing rolling Collasible Shutter of approved make made 80x125mm (3\\"x5\\") cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side quides and arrangements for inside and outside locking with push and pull operation compete but excluding the cost of top cover and springs. 518
28Dismantling sundrise brick work including stacking of dismanted material as directed by the Engineer in charge with in a distance of 60 metre (691)
29Excavation in foundation in ordinry soil (Loam Clay or sand) including lift upto 1.50 meter and lead upto 30 m all completion of the work (Sl No.251)
30Concrete with 4 cm gauge brick ballast fine sand of 1;2 FM and cement in proportion of 12:6:1 in foundation and under floors i/c supply of all materials, labour and T& etc required for proper completion of the work (SI 273+281-275)
31RCC work 1:2:4 cement, coarrse sand and 40 mm gauge stone grit Raft foundation SI No. 287
32RCC work with cement approved coarse sand and 2 cm Gauge approved stone grit in proportion of 1:2:4 in lintels of doors, windows and sunshades excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour and T&P etc required for proper completion of work. Binding wire of supplied by the contractor free of cost SI No. 283
33RCC work with cement approved coarse sand and 2 cm Gauge approved stone grit in proportion of 1:1:5:3 in colums excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGGI Binding wire and including necessary centering and shuttering etc. and supply of all materials, labour and T&P etc required for proper completion of work. Binding wire of supplied by the contractor free of cost SI No. 289
34M-150 brick work in 1:4 (one cement and four sorsesand of in foundation and plinth brick thick wall including supply of all materials, labour and T&P etc required for proper completion of work SI no. 305A
35MS (Tor Steel) in plain work such as RCC or RB work wrought to required shahpe as necessary including bending for proper completion of the work and i/c supply of steel and its wastage bend books and authorized over lapping shall be measured DSR 2023
3612mm thick plaster with one part of cement and four part of approved coarse sand including supply of all materials labour and completion of work SI 584A
37Finishing wall with two coat of water proof cement paint weather coat of approved quality on previously old treated surface with this paint to give an even shade including cost of providing of cement primer including supply of all materials, labour Tools & plant etc.
38Heavy sizes such as trusses, built up gates, record racks, roof work, gates etc. including rivetting or welding where necessary. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58394327
AUTHORITY Government Departments
TENDER VALUE 14.70 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Rajya Krishi Utpadan Mandi Parishad
Work Description Tender For Repair And Painting Of The Office Building Located Within The Food Grain Complex At The New Mandi Site In Baraut, Along With The Repair And Painting Of The Entrance And Exit Gates And The Boundary Wall At Nmy Badaut
Basic Detail
Tender No 2026/BUILDING REPAIR ETC/BADAUT
Bidding Type Tender
Location
City Baghpat
State Uttar Pradesh
Key Dates
Publish Date 04 Nov 2026
Submission Date 25 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 14.70 Lakhs
Tender Fee 2714
EMD 1.47 Lakhs
Exemption Available
Document List
b6d79b5c-4993-4333-b47a-5dc467d92373.html
BOQ_2281855.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

b6d79b5c-4993-4333-b47a-5dc467d92373.html

xls

BOQ_2281855.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender