Tender For Repair And Painting Work Etc. Of The Committee Office Building At Nmy Khurja.
Tender Value
13.50 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
10 days left
EMD
1.35 Lakhs
Bank guarantee accepted
Document Fee
2478
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bulandshahr → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Painting Work Etc. Of The Committee Office Building At Nmy Khurja.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling exisiting plaster including disposal of refues as directed by the engineer-in-charge with in a distance of 60 meter (200 feet) all completion of the work (SI No 706) |
| 2 | Dismentling exisiting plaster including disposal of refuse as directed e/I with in a distance of 60 mtr (SI nO 706 |
| 3 | Dismentling of brick work /stone work in cement mortar including stacking of material as directed by E/I (S.I No 692) |
| 4 | ROOF TREATMENT BY FERRO CEMENT in 1:2:4 including supply all material T&P all completion of the work |
| 5 | 12 mm thick plaster with cement and fine sand of 1.25 fineness modules in 1:6 over brick work minimum thickness not to be less than 1 cm all material labour etc all completion of the work (SINo 584 b) |
| 6 | Providing wall putty on new surface with approved quality material All completion of the work (SI No New item 15.26 |
| 7 | Providing wall putty on old surface with approved quality material All completion of the work (SI NO 15.27 |
| 8 | Distempering with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer all completion of the work (SI NO 649+650 |
| 9 | Finishing wall with weather coat of approved make and qulity on all treated surface with two coat to give an even shade ibcluding supply of all material all complation of the work (Si NO new item 15.24 page 45 |
| 10 | Finishing wall with water proof cement paint of approved make and qulity on new surface with three coat to give an even shade ibcluding supply of all material all complation of the work |
| 11 | Conceret in 1:2:4 including supply of all material labour T&P etc all completion of the work (SI NO 279 A |
| 12 | M-150 Class B/W in 1:4 cement and C/Sand in froundation & plinth including supply of all materials labour T&P etc. required for completion of work. SI no. 303. |
| 13 | Concrete with 4 cm gauge stone ballast coarse sand and cement of 1:12:6 including supply of all matarials labour tools & plants etc. required for proper completion of the work as SI No. 273(a). |
| 14 | supply and fixing of flus door commercial quality conforming to I.S.2202 part I(1983) including fixing wooden cleats and stoppers and including fixing and adjustment of hinger bolts locks handle spring fitting with necessary screws to be supplied (SI NO 470 A |
| 15 | Approximate cost of ISI marked oxidized iron fitting with screwfor door & window etc (SI NO 473 |
| 16 | Painting or varnishing in small area on new wooden or steel work two coat including supply of all materials, labour and T&P etc. Required for the proper completion of the work. (SI. 641+642) |
| 17 | Painting two coat over priviously old treted surface on wood or steel and other metal surface including supply of all materials, labour and T&P etc. Required for the proper completion of the work. (SI. 642+643) |
| 18 | providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and confroming to I.S. 15622 of skirting riser of steps over 12 mm thick bed of cement mortor 1:3 all completion of the work (New item 14.25B ) |
| 19 | providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and confroming to I.S. 15622 of skirting riser of steps over 12 mm thick bed of cement mortor 1:3 all completion of the work (New item ) |
| 20 | Providing and fixing white vetreous china pedestal type water closet (Europen type) with seal and lid litre low level white virteous china flushing cisten C.P flush bend bend with fitting & C.I brackets 40mm flush bend overflow arrangement with special of standard make and mosquito proof coupling of approved municipal design complete W.C. pan with ISI marked white solid plastic seat and lid (SI No 17.3.1) |
| 21 | Providing and fixing white vetreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x10x265mm sizes respectively with automatic flusing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps one urinal basin with 5 liter white P.V.C automatic flusing cistern (SI No 17.4) |
| 22 | Providing and fixing white vitreous china wash basin includinng making all connection but excluding the cost of fitting sizes 630x450mm all completion of the work (SI No 17.25.1) |
| 23 | Providing and fixing C.P. brass bib cock of approved quality conformimg to IS 8931(SI NO 18.5 |
| 24 | Providing and fixing C.P. brass long nose bib cock of approved quality conformimg to IS 8931(SI NO 18.5 |
| 25 | Supply and fixing galvanized mosquitos proof heavy quality iron wire gauge or expended metal heavy quality over windows and including supply of C.P. teak wood batten 8 cm.x1.cm. (3\\"x3/8\\")/flat iron 25 mm.x4mm. And including supply of necessary screws all materials, labour, tools & plants etc. required for proper completion of the work. si no. 455 |
| 26 | RCC slab with 2 cm. gagure approved stone grit coarse sand & cement at the proportion of 1:2:4 in slab including supply of all materials, labour, T&P etc. required for proper completion of the work. |
| 27 | Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (when not includedin over all rates) wrought to required shape as necessary including bending for proper completion of the work. And including supply of steel wastage beads, hooks and authorized overloading shall be measured. |
| 28 | MS or iron work in grills & stair case ralling si no. 502A Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender