Tender For Replacement Of Old Tin Roof Sheet At Aft Under Zone-Ii And Provn Of Washing Point For Kitchen Near Bldg P-4 At Hq Rtg Zone At Jaipur Mil Stn
Tender Value
11.35 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
16 days left
EMD
22700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Old Tin Roof Sheet At Aft Under Zone-Ii And Provn Of Washing Point For Kitchen Near Bldg P-4 At Hq Rtg Zone At Jaipur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ 82614/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: REPLACEMENT OF OLD TIN ROOF SHEET AT AFT UNDER ZONE-II AND PROVN OF WASHING POINT FOR KITCHEN NEAR BLDG P-4 AT HQ RTG ZONE AT JAIPUR MIL STN CA NO: CWE/JPR- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Dismantling CGI / asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed. |
| 3 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/J hook, L-type crancked hook complete all as specified and directed. |
| 4 | S&F 0.63 mm thick Plain, galavanized, mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) with grade of Zinc coating 275 complete all as specified and directed. |
| 5 | M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410-W(GdeE-250) qualityB complete all as specified and directed. |
| 6 | Excavating in post holes each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm watering and removing surplus soil to distance n exc 50 m and making good surface in soft/loose soils complete all as specified and directed. |
| 7 | M&L for Providing PCC 1:3:6 type D-2 (40mm graded agg) as in foundations complete all as specified and directed. |
| 8 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 9 | M&L for band ,straps,plates,angle cleats for securing purlins to wood or tubular truss or rafter , wind ties etc Fe 410 or Fe 310 complete all as specified and directed. |
| 10 | M&L for Steel work in tubular trusses incl spl shaped washer etc using ERW or induction butt welded tubes conforming to IS-1161-1998 Gd St-240 complete all as specified and directed. |
| 11 | M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 12 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out loose/soft soil complete all as specified and directed. |
| 13 | Removing excavated material n exc 100m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 14 | M&L for Machine cut kota stone slab flooring 20-25mm thick over and incl cement screed base 15 mm thick in 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 15 | M&L for pre-cast cement concrete block masonry with solid blocks, exc 10 cm in width and setting in mortar complete type 1:2:4 set in cement mortar complete all as specified and directed. |
| 16 | M&L for 75 mm thick cement concrete type D-2, 1:4:8 as in floor complete all as specified and directed. |
| 17 | S & F Oil & Grease trap of Stainless steel SS-304 Grade of 140 Litre Capacity with grease dispensing valve and drain valve for sludge removal complete all as specified and directed. |
| 18 | M&L preparation of new or previously untreated concrete surfaces of any description over 10 cm girth or width not otherwise described in kerb stones and applying two coats of synthetic enamel paint over a coat priming coat complete all as specified and directed. |
| 19 | S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15mm complete all as specified and directed by Engineer-in-charge. |
| 20 | S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20mm complete all as specified and directed. |
| 21 | S&F bib taps cast copper alloy chromium plated fancy type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 22 | S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, union and waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 23 | S&F Granite 19 mm thick of any type work table rubbed and polished in steps, jambs, pillars, window cill, cooking platforms and like in cement mortar 1:4 including pointing cement mortar 1:2 using marble dust with admixture of pigments to match with shade of granite complete all as specified and directed. |
| 24 | Rounding to edges of stone slabs (Kota / Granite) one edges such as in steps, cooking platform and other similar situations complete all as specified and directed. |
| 25 | M&L for rendering 15mm thick in CM 1:4 finished even and fair without using extra cement complete all as specified and directed. |
| 26 | S&F Preparing surfaces of plaster or unplaster new and applying two coat of cement base paint on walls complete all as specified and directed. |
| 27 | M&L for Cement concrete in surface channels and drains type B2 1:2:4 using 40mm graded agg complete all as specified and directed. |
| 28 | M & L for Cement concrete 40mm thick type B-1 (1:2:4) (20mm graded aggregate) as in floors complete all as specified and directed. |
| 29 | Schedule of Credit Total in Figures 0.0 0.0 -85850.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus Eighty Five Thousand Eight Hundred & Fifty Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender