Educational and Research Institute Government Departments Closing in 0 days TDR #58393798

Tender For Providing Of Power Supply And Internal Electrification Work For Helium Liquefier Lab At Iit Delhi, Sonipat Campus.

Issued by Government Departments · Delhi, Delhi
Tender Value
17.41 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
0 days left
EMD
34826
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing Of Power Supply And Internal Electrification Work For Helium Liquefier Lab At Iit Delhi, Sonipat Campus.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 12-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 19-Nov-2026

BOQ

Name of Work:- Providing of power supply and internal Electrification Work for Helium liquefier lab at IIT Delhi, Sonipat Campus.
Sl. No. Item Description
1Supplying and laying of ISI marked PVC insulated XPLE armoured aluminium conductor cable of following size of 1.1 kV grade conforming to IS:7098 on surface / recess / cable tray /above false ceiling etc. as required. (Acceptable make: Any Reputed make)
23.5 core x 95 sqmm
33.5 core x 70 sqmm
44 core x 16 sqmm
54 core x 6 sqmm
6Supplying and making end termination with brass compression gland and aluminium / copper lugs (as applicable) for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
73½ X 95 sq. mm (45mm)
83½ X 70 sq. mm (38mm)
94 X 16 sq. mm (28mm)
104 X 6 sq. mm (18.5mm)
11Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
12Fabrication, supplying, Installation testing & commissioning of double door Electrical Control Panel of cubicle construction, of size not less than 1.9 m (W) x 1.5m (H) x 0.4 m (D) floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, busbar chamber, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering, sign writing etc. complete in all respect, suitable for AC, Lights, Power points etc. complete as per CPWD specification with following incoming and outgoings, suitable for operation on 415V, 3 phase, 50Hz ac supply with enclosure protection class IP 42 , necessary earthing, as required. Panel shall be made from CPRI approved company and schematic drawing with dimesion shall be got approved by the Engineer in-charge before fabrication and assembling.
13INCOMINGS200A, 50kA 4 Pole MCCB with Microprocessor Release conforming to IS/IEC 60947-2, Ics=100% Icu Rating (Ref similar product: dsine-DZ iTRP1) with spreader terminal, operating handle, etc. (01 Set) With one Digital 3 Phase Energy Meter with CTs, as required, with LCD Display, optical port and box. Accuracy : class 1 as per IS 13779 , with 50 Hz frequency complete with connection etc. complete as required. (Acceptable make: L&T / Universal / Rishabh / AE)
14OUTGOINGS(Note : All outgoing feeders should have digital Ammeter with and LED type ON, OFF, trip indicating lamps)
15OUTGOING63 Amp, 50kA TPN MCCB, Ics=100% Icu with Microprocessor Release conforming to IS/IEC 60947-2, (Ref similar product: dsine-DZ iTRP1) for lab equipment with digital voltmeter and ammeter CTs etc, LED type RYB phase indicating lamp, ON, OFF, trip indicating lamps with all acceessories, etc.. - (3 set)
16MISC. OUTGOINGS 32 amp, 36 kA TPN MCCB, Ics=100% Icu, with Microprocessor Release with digital voltmeter and ammeter with selector switch and CTs etc as required, LED type RYB phase indicating lamp, ON, OFF, trip indicating lamps with all acceessories and terminal spreaders, operating handle conforming to IS/IEC 60947-2, (Ref similar product: dsine-DZ iTRP1) - 6 sets (5+1 spare)
17BUSBAR - Set of aluminium busbar ( not less than 400A rating of size of each strip not less than 30 mm x10 mm) with busbar support, protection, insulation, necessary holes, etc.
18AMMETER,VOLTMETER : Digital meter class 0.5 with RS 485 capable of measuring voltage, ampere, with suitable secondary current CTs, LED indicating lamps for RYB, dedicated buttons and LCD display for direct access to Basic, Power and Energy parameters, etc complete as required. (similar product of MF meter 4410 series of LK having cat no. WL4410210000) - 02 sets for two separate incomers.
19Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
2020 mm
21Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
223 x 1.5 sq. mm
233 x 2.5 sq. mm
24Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
254 X 10 sq. mm + 2 X 6 sq. mm earth wire
264 X 16 sq. mm + 2 X 6 sq. mm earth wire
27Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
283 Module (100mmX75mm)
296 Module (200mmX75mm)
30Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
315/6 A switch
3215/16 A switch
336 pin 15/16 A socket outlet
3420 mm inspection/ solid bends
3520 mm sockets
3620 mm junction box, one way
3720 mm junction box, two way
3820 mm iron staples/ saddles/ screws
39Modular blanking plate
40Ceiling rose, 3 pin, 5 A ISI marked
41Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders along with SS enclosure including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. [Ref. of SS encloser L&T]
42200 A, 25 KA,TPMCCB
43Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
44Supplying and fixing 63 A, 415 V, TPN (P+N+E), 5 Pin + SC Industrial type socket outlet, metal enclosed plug top along with 63 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
45Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).
468 way (4 + 24), Double door
47Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
48Single pole
49Triple pole and neutral
50Supply, Installation, Testing and Commissioning of Wall fan 1320 rpm ,airflow of 92 m3/min and an impressive 40 cm (400 mm) sweep size,Power Input 70 W.Take control of with 3 wind modes for easy speed adjustment of the wall mount fan according to needs, This easy to clean , with an adjustable tilt of 65° and oscillation control within 60°, allowing you to create the perfect airflow and cooling experience, It offers 100% copper motor for consistent performance and longevity, Durable ABS build wall fan equipped with an inbuilt thermal overload protector for long-lasting performance and corrosion-resistant powder-coated metal grill for enhanced safety.With 2 Year domestic warranty.
51Supplying and fixing of 250 mm sweep fresh air (exhaust fan) fan of not more than 45 watt rating, 1100 - 1350 rpm, complete with motor blade assembly, non-metallic frame (body), louvre shutter with two year warranty on product, colour white or off white. [Acceptable make: Any reputed make]
52LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140 270 Volt, frequency 50/60 hz,Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)
5318-22 Watt
54LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥105 <120 lm/Watt).Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection,EMI-EMC as per CISPR -15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K / 5700°K /6500°K (As per ANSI Bin) ,SDCM(Standard Deviation Color Matching) <5,Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-inCharge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
5550 watt Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58393798
AUTHORITY Government Departments
TENDER VALUE 17.41 Lakhs
LAST DATE 19-11-2026
Authority
Authority Name Indian Institute Of Technology
Work Description Tender for Providing Of Power Supply And Internal Electrification Work For Helium Liquefier Lab At Iit Delhi, Sonipat Campus.
Basic Detail
Tender No IITD/WORKS (SP-5452)/2026
Bidding Type Tender
Location
City Delhi
State Delhi
Key Dates
Publish Date 12 Nov 2026
Submission Date 19 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value 17.41 Lakhs
Tender Fee Ref. Documents
EMD 34826
Exemption Not Available
Document List
381f0434-371c-4fce-8100-b76d044e751b.html
BOQ_980696.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Today
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

381f0434-371c-4fce-8100-b76d044e751b.html

xls

BOQ_980696.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender