Tender For Advertized Rate List /Bill Of Quantity For Revival & Restoration Of Bhairav Bagh/ Bhairav Nath Temple , Restoration Of Springs & Qutiya & Development Of Public Amenities.
Tender Value
60.16 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
11 days left
EMD
1.20 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Advertized Rate List /Bill Of Quantity For Revival & Restoration Of Bhairav Bagh/ Bhairav Nath Temple , Restoration Of Springs & Qutiya & Development Of Public Amenities.
BOQ
| Sl. No. | Item Description |
| 1 | Part \\"A\\" Structural Temple |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 3 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 4 | Providing and laying of soling stone size on level (hand packed ) watering ramming complete below Foundation & rooms including carriage Isolated footings |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size crushed in foundation and under flooring |
| 6 | Providing and laying in position cement concrete of specified grade excluding the costofcentering and shuttering–all works upto plinth level:M-151:2:4 (1cement: 2coarsesand: 4 graded stone aggregate 40 mm nominal size crushed ) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position specified grade of Reinforced cement concrete M20 (1:1½:3, ) excluding the cost of centering, shuttering, finishing and reinforcement.All works above plinth including carriage complete. |
| 9 | Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams,plinth beams, girders, bressumers and cantilevers |
| 12 | Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. HYSD reinforcement of grade Fe-500D steel bars at all levels. |
| 13 | Filling GSB filling under flooring in layers not exceeding 20 cm in depth consolidating |
| 14 | Structural steel work welded in built up section for trusses and framed work including cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer. |
| 15 | Architectural part \\" Temple/ Spring |
| 16 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :(Cement mortar 1 :6 (1 cement : 6 coarse sand) |
| 17 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 18 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 19 | Providing and fixing wood work in frames of doors, windows, clerestory windows, and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diameter and length (hold fast lugs or with dash fasteners shall be paid for separatel of imported KD Wood. |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.imported KD wood with all necessary hardware fittings |
| 21 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :imported KD wood with all necessary hardware fittings |
| 22 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative / non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 23 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 24 | Providing and fixing hardware fittings of approved brand and of required type as approved by Engineer incharge. complete as per the specifications . (Brass) |
| 25 | L-Drops |
| 26 | Tower Bolts 100mm (Windows) |
| 27 | Handle 100mm (window) |
| 28 | I-Hooks 150mm |
| 29 | Tower bolts 150mm (doors) |
| 30 | Handle 125mm (door) |
| 31 | butt hinges of 100x63x3.2 mm |
| 32 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 33 | With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 34 | Providing and fixing of 25 mm thick dewri stones tiles in flooring / walls with single face fine cheasled only over a bed of cement concrete of grade 1:2:4 of thickness upto 50mm including all carriages complete job. |
| 35 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 36 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.(Crushed) |
| 37 | Providing and fixing plannes eaves boarding (300mm x 40mm )( nominal size) second class kail wood fixed with screws etc, including all carraiges .All job completed |
| 38 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 1st class kail wood |
| 39 | Providing & fixing of Hib Rib colour coated sheets of 0.5 mm thickness for roofing incl. hook bolts & nuts of 8 mm dia or PVC limpet washer complete upto any pitch in Horizontal / Vertical or curved surfaces incl. Ridges / hips or valleys of 60 cm overall width of plain precoated sheets wherever requried complete. |
| 40 | Providing & fixing of wood work in frames of false ceiling, partitions etc. sawn and fixed in position. Budloo/ fir wood |
| 41 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 42 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 43 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 44 | Structural part |
| 45 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 46 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil : |
| 47 | Providing and laying of soling stone size on level (hand packed ) watering ramming complete below Foundation & rooms including carriage. |
| 48 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) crushed in foundation and under flooring |
| 49 | Providingandlayinginpositioncementconcreteofspecifiedgradeexcludingthecostofcenteringandhuttering – all works upto plinth level: M-151:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 40 mm nominal size crushed ) |
| 50 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 51 | Providing and laying in position specified grade of Reinforced cement concrete M20 (1:1½:3, ) excluding the cost of centering, shuttering, finishing and reinforcement.All works above plinth including carriage complete. |
| 52 | Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete |
| 53 | Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms |
| 54 | Centering and shuttering including strutting, propping etc. and removal of form for stairs (excluding landings) except spiral staircases. |
| 55 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams,plinth beams, girders, bressumers and cantilevers |
| 56 | Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. HYSD reinforcement of grade Fe-500D steel bars at all levels. |
| 57 | Filling GSB filling under flooring in layers not exceeding 20 cm in depth consolidating |
| 58 | Structural steel work welded in built up section for trusses and framed work including cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer. @ 40 Kg/Sqm |
| 59 | Architectural part \\" Dormitory |
| 60 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :(Cement mortar 1 :6 (1 cement : 6 coarse sand) |
| 61 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 62 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in :(Cement mortar 1 :4 (1 cement : 4 coarse sand) Extra for |
| 63 | 15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 64 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand |
| 65 | Providing and fixing wood work in frames of doors, windows, clerestory windows, and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diameter and length (hold fast lugs or with dash fasteners shall be paid for separatel of imported KD Wood. |
| 66 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative / non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 67 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, all complete as per direction of Engineer-in-charge.imported KD wood with all necessary hardware fittings |
| 68 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :imported KD wood with all necessary hardware fittings |
| 69 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 70 | Providing and fixing hardware fittings of approved brand and of required type as approved by Engineer incharge. complete as per the specifications . (Brass) |
| 71 | Modular door lock ss finish handle 10\\" with duaal locking system inside & outside (godrej) |
| 72 | L-Drops |
| 73 | Tower Bolts 100mm (Windows) |
| 74 | Handle 100mm (window) |
| 75 | I-Hooks 150mm |
| 76 | Tower bolts 150mm (doors) |
| 77 | Handle 125mm (door) |
| 78 | butt hinges of 100x63x3.2 mm |
| 79 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 80 | With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 81 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 82 | Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete. |
| 83 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. |
| 84 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Size if Tile 250 x 350 mm. (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 85 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).(500/600/800/1000) mm |
| 86 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. (500/600/800/1000) mm |
| 87 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc.,by applying cemnet slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement@ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement compound @ 0.126 kg/sqm. This layer will be allowed t air cure for 4 hours followed with water curing of 48 hours. The rate includes preparation of surface, treatment and sealingof all joints ,ciorners, juntions of pipes and masonry with polymer mixed slurry. |
| 88 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 89 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 90 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 91 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.(Crushed) |
| 92 | Providing and fixing plannes eaves boarding (300mm x 40mm )( nominal size) second class kail wood fixed with screws etc, including all carraiges .All job completed |
| 93 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws 1st class kail wood |
| 94 | Providing & fixing of Hib Rib colour coated sheets of 0.5 mm thickness for roofing incl. hook bolts & nuts of 8 mm dia or PVC limpet washer complete upto any pitch in Horizontal / Vertical or curved surfaces incl. Ridges / hips or valleys of 60 cm overall width of plain precoated sheets wherever requried complete. |
| 95 | Providing & fixing of wood work in frames of false ceiling, partitions etc. sawn and fixed in position. |
| 96 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 97 | Providing and Fixing of 50mm dia stainless steel railing of 304 grade of hallow tube 1.6 mm thick of Jindal/Salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape, buffing etc. Complete and fixing stainless steel balusters upto 900 mm height and S S tubes, three in one installed horizontally including cutting, welding, grinding to required shape and size by required steel dash fasteners, nuts, bolts, screws ,etc. in floors and treads including providing SS shoe at each balusters complete as per architectural drawings and as per the directions of engineer incharge including cutting of granite/marble floors and fastening with lead grouting if required, complete in all respects. |
| 98 | Providing & fixing of stainless steel nevel post (Ornamental ) including top ball of AISI 304 grade of required height duley anchored to floor with dash fasteners . Height of the nevel post shall not be less than 1050 mm above the finished skirting level all complete as per architectural drawings (including cost of all material, leads, lifts and carriages etc upto site of work complete).Complete as per the directions of Engineer incharge |
| 99 | Sanitary & Plumbing part |
| 100 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous chinaflushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make andmosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good thewalls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 101 | Providing and fixing Under Counter wash basin,with 32 mm Waste Coupling and other allied accessories including cutting and making good the walls wherever required:- (a) White Vitreous China Under Counter Wash basin. |
| 102 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board |
| 103 | 510x1040mm bowl depth 250mm |
| 104 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved makeand shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm |
| 105 | Providing and fixing toilet paper holder with Flap made out of C.P Brass |
| 106 | Providing and fixing C.P Brass Soap Dish. |
| 107 | Providing and fixing CP brass towel rail complete with CP brackets fixed to wooden cleats with CP brass screws |
| 108 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 109 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 110 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 111 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge with Health Faucet.(For EWC) a) 15 mm nominal dia |
| 112 | Providing and fixing Stainless Steel Retractable Sink Basin Water Drain Pipe of approved quality & make and as per the direction of Engineer-in-charge. (For Kitchen Sink) |
| 113 | Providing and fixing CP Brass Sink Mixer with Regular Swivel Spout of quality & make as approved by Engineer in charge |
| 114 | Providing and fixing CP Brass Single lever telephonic wall mixer with providion of overhead shower with 115mm long Bend pipe of quality & make as approved by Engineer inchargea) 15 mm nominal dia |
| 115 | Providing and fixing CP Brass Over Head Shower of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 116 | Providing and fixing soil,wasteandventpipesIS13592&fittings(IS:14735)suitable to rubber ring joints ,whichincludesbends, rubber ring, jointing,junctions,cleanoutplug,cowls,offsets,collar,M.Sholder-batclamps,access pieces, trap of self cleansing design .etc. complete including jointing |
| 117 | 110mm dia.PVC SWR socketed pipe with rubber ring joints as perIS:13592 Type-B |
| 118 | 75 mm dia.PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B |
| 119 | Providing and fixing of RainWater pipes IS13592&fittings (IS: 14735 )suitable to rubber ring joints ,which includes bends, rubber ring, jointing, junctions,clean out plug,cowls,offsets,collar,M.Sholder-batclamps,accesspieces, trap of self cleansing design .etc. complete including jointing. |
| 120 | 110 mm dia.PVC SWR socketed pipe with rubber ring joint sasperIS:13592 Type-A |
| 121 | Providing and Fixing of Floor Traps 110mm with double chrome plated Cover one Grated and one closed and all other fittings required.Makes:- Astral/SFMC/Finolex |
| 122 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8gradedstoneaggregate40mmnominal size),inside plastering12mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished withfloating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : |
| 123 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 124 | Supply, Installation of PVC Gully Trap of Size 110 mm |
| 125 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. |
| 126 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m |
| 127 | Providing and laying cement concrete1:5:10(1cement : 5 coarse sand: 10 graded stone aggregate 40 mm nominal size)upto haunches of P.V.C pipes including bed concrete as per standard design : |
| 128 | 110 mm dia.PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B |
| 129 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.(SDR-11) Internal work Concealed fixing the pipe with clamps at1.00 meter spacing including cutting chases and making good the wall etc. |
| 130 | 15mm nominal outer dia pipes |
| 131 | 20mm nominal outer dia pipes |
| 132 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.(SDR-11) Internal work-exposed on wall with clamps at 1.00 meterspacing |
| 133 | 20mm nominal outer dia pipes |
| 134 | 25mm nominal outer dia pipes |
| 135 | 40mm nominal outer dia pipes |
| 136 | External work including trenching and refilling etc.complete |
| 137 | 40mm nominal outer dia pipes. |
| 138 | Providing and fixing unplasticised PVC connection pipe with brass unions: 45cm length |
| 139 | Cutting holes upto 30x30 cm in walls including making good the same with common burnt clay F.P.S.(non modular) bricks |
| 140 | Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 16Kg/sqcm with threaded /flanged joints complete with nuts, bolts, gaskets, washers etc. |
| 141 | 25 mm diameter |
| 142 | 32 mm diameter |
| 143 | 50 mm diameter |
| 144 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 145 | Providing and fixing on wall 50 LTRS Electric Geyser with ABS Body. |
| 146 | Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design |
| 147 | Constructing septic tank, of size 5.0 mx 2.5 m x2.80 m approx. height(Height to be fixed as per site requirement i.e. below invert level of last manhole , in B/W, 350/230 mm thick ( minimum) walls |
| 148 | Construction of Gate |
| 149 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, inclding getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil |
| 150 | Providing and laying hand packed stone solling including ramming and dressing including all leads lifts and all carriages complete. |
| 151 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 152 | Providing and laying in Reinforced cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 153 | Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site oflaying , excluding the cost of centering, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer- in - charge. Note: - Cement content considered in this item is @ 330 kg/ cum. Excess/ less cement used as per design mix is payable/ recoverableseparately. All works above plinth level upto floor V level |
| 154 | Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. HYSD reinforcement of grade Fe-500D steel bars at all levels. |
| 155 | Centering and shuttering including strutting propping etc. and removal of form for foundation, footings basses of columns etc . For mass concrete |
| 156 | Supplying and filling in plinth with GSB under floors including, watering, ramming, consolidating and dressing complete, including all carriages. |
| 157 | DEVRI STONE WORK Providing and fixing of 25 mm thick dewri stones tiles in flooring / walls with single face fine cheasled only over a bed of cement concrete of grade 1:2:4 of thickness upto 50mm including all carriages complete job. |
| 158 | Structural steel work in single section,in gates etc with M. S .flats ,square or round bars or as per the design approved by the consultant. complete. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job |
| 159 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender