Tender For Lifting & Repairing Of Twin Hull Steel Barge At Rangamatia - Ii State Govt. Owned & Operated Major Rli Scheme At Mouza-Rangamatia, J.L. No.-93, Plot No,-1269 In Ratua Ii Block Of Ratua (Agri-Mech) Sub-Division Within Malda-Ii (Agri-Mech) D
Tender Value
3.56 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
6 days left
EMD
7500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Maldah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lifting & Repairing Of Twin Hull Steel Barge At Rangamatia - Ii State Govt. Owned & Operated Major Rli Scheme At Mouza-Rangamatia, J.L. No.-93, Plot No,-1269 In Ratua Ii Block Of Ratua (Agri-Mech) Sub-Division Within Malda-Ii (Agri-Mech) Division,Malda Under Non-Plan Programme.
BOQ
| Sl. No. | Item Description |
| 1 | Labour charges for engagement of 4 nos of unskilled labour/day to tie up the submerged Twin Hull steel barge under the deep water of river by steel wire rope for 2(two) days |
| 2 | Hire Charge for 2 No. country boat for carring working materials working persons on river to tie up the submerge Twin Hull steel barge under deep water of river by steel wire rope for 2(two) days |
| 3 | Hire charges of 3 Nos. winch machine for 2 days @ Rs. 350/ Day/Machine as per local Market. |
| 4 | Labour charges for engagement of 1 nos skilled labour/day/machine for operating of 3 Nos. winch machine for 2 days. |
| 5 | Labour charges for engagement of 3 nos unskilled labour/day for helping & operation of 3 nos. winch machine for 2 days |
| 6 | Labour charges for engagement of 4 nos of unskilled labour for bailling out water, cleaning of mud etc. from the submerged steel barge for 2 days. |
| 7 | Labour charges for 5 nos of un-skilled labour/day for assisting operaters for putting & draging of Twin Hull Steel Barge on shore and river water including handling of materials required for the works for 4 days. |
| 8 | Hire charges of bamboos for sal wood sleeper channel, wire rope etc. for 4 days @ Rs. 100.00/days as per local market. |
| 9 | Shifting of Barge to a suitable working site or place from the R.L.I. Site & blocking of Barge by area clearance, earth cutting, Winching, Jacking, Planking, block fixing and un jacking and placing at the R.L.I. site including tools and plants for blocking. |
| 10 | Removing the pump set installed on the barge from the foundation including disconnection of electrical connection, removal of suction and delivery assemblies from the barge to a secured place and refitting of the same properly and connection the electrical connection after the maintaince of the barge. |
| 11 | Opening straightening and refitting the plates, angles, purloins, trusses, bollare, expanded metal/ B.R.C. net, winch etc. as required as per direction of the E.I.C. |
| 12 | Acid treatment for removing rust corrosion etc.from the surface both inside and outside as per direction of the E.I.C. |
| 13 | Chipping , scraping wire brushing and cleaning of the painted surface of keel, hull,frame, superstructure deck, fender both inside and out side as per direction of the E.I.C. |
| 14 | Patch/ doubling work complete with 5 mm thk M.S. plate including welding, gas cutting, fitting, fixing complete. (a) Cost of 5 mm thk M.S. plate including wastage due to cutting, labour charge for straighting, fitting fixing in position. |
| 15 | (b) Gas cutting to required size of upto 8 mm thk M.S. plate, N.S>C. channel etc. including labour charges , higher charges of all tools and plants. |
| 16 | (c) Electric welding charge for 5 mm thk M.S. plate, M.S> channels etc. and other member of the barge including hire charges of all tools and plants. |
| 17 | M.S. structuarl work in roof trusses etc with the following rolled structural members viz. angle, flat, bars etc. weighing less then 22 kg./ m connection to one another with brackets, cleats, bolts & nuts etc. as per design and direction complete including febrication hoisting & erection. (a) Suppling, fitting & fixing of M.S. angle for post rafter purloin etc and for joining the two hulls at both ends including gas cutting etc. (i) 45 mm x 45 mm x 6 mm |
| 18 | (b) Suppling, fitting & fixing of M.S. flat bar including gas cutting etc. (i) 40 mm x 6 mm for straightening of B.R.C. net etc. including gas cutting. |
| 19 | (ii) 25 mm x 5 mm for fixing on the roof of G.C.I. sheet as tie bar. |
| 20 | (c) 50 mm dia M.S. tube to be cut in the semi circular shape and fixing the same at the top of keel and hull side of the barge by running welding. |
| 21 | Suppling, fitting and fixing of different size of bolt and nuts with washer for fixing door (10 to 16 mm dia) upto 75 mm length |
| 22 | Suppling, fitting fixing 10 cm oxidized hinge (100 mm x 58 mm x 1.9 mm) for fixing door including the cost of welding. |
| 23 | Suppling, fitting fixing iron hasp bolt of approved quality (oxidized) & socket on the doors including the cost of welding. The bolt would be 30 cm. long and dia of bolt not less than 18 mm. |
| 24 | Suppling, fitting fixing of I.R.C. net (75 mm x 25 mm x 10 swg) with nuts and bolts of the barge including gas cutting etc. |
| 25 | Galvanized corrugated iron sheet work (including the supporting frame work) fitted and fixed with 10 mm dia \\"J\\" or \\"L\\" hook-bolts, limpet and bitumen washers and putty complete with 150 mm end lap and one corrugation minimum side lap with 0.63 mm thk sheet in roof. |
| 26 | G.I. sheet ridging fitted and fixed with necessary bolts and nuts sctews, washers etc. complete with 0.60 mm sheets. |
| 27 | Primming one cote on steel or other metal surface with synthetic enamel /oil bound primer of approved quality including smoothening surface by sand paper etc. |
| 28 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc, if necessary (i) Two coat (with any shade except white) |
| 29 | Painting with Coal Tar Epoxy Paint Two Coat of approved brand (Minimum Dry Film Thickness (DFT) 200 Micron) at all location prepared and applied as per manufacturess specification on Steel Surface. |
| 30 | Leak proof testing of repaired hull if floating condition on river water with proper endurance test as required for minimum perion of 48 hrs. complete as per direction of the E.I.C. |
| 31 | Transportation charge for carrying of all the materials working devices etc. upto the scheme and back. |
| 32 | Deduction towards scrapped MS Plate, MS Sheet, MS Fitting (MS Angle, Bar & channel), MS Rod, GCI Sheet, IRC/BRC Net etc from Barge on the basis of actual measurement to be retained by the agency for disposal . This item includes weighting, handling, carriage, loading, unloading, stacking etc of scrapped materials from RLI Sites. (Inclduding of all labour charges), Convenient weighing arrangement at the RLI Sites would be made by the agency at his own cost. |
| 33 | Add 18% GST |
| 34 | Add 1% Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender