Tender For Repairing & Rewinding Of 25 (Twenty Five) Numbers 17.5 / 20 H.P 3 Phase 440 Volt Heavy Duty Squirrel Cage Electric Motor Rated 1440 R.P.M. With 50 Cycle For Electrically Operated Govt. Owned & Operated Major Rli Schemes Under Ratua (A-M) S
Tender Value
4.75 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
5 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Maldah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing & Rewinding Of 25 (Twenty Five) Numbers 17.5 / 20 H.P 3 Phase 440 Volt Heavy Duty Squirrel Cage Electric Motor Rated 1440 R.P.M. With 50 Cycle For Electrically Operated Govt. Owned & Operated Major Rli Schemes Under Ratua (A-M) Sub-Division Under Non Plan Programme.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of different H.P 3 Phase 380-400 Volt 1440 RPM, 4/3 pole 50 cycle for induction motors, removing old burnt out coil from slots carefully, segregating all the parts, washing and cleaning the same thoroughly for verification of serviceable and unserviceable parts as per direction of E.I.C. (i)17.5 H.P/ 20 H.P 3 phase induction motor. |
| 2 | Rewinding with approved quality Super Enamel copper winding wire of standard guage as provided by motor manufacturer including slot insulation as per Indian Electrical Rules, shouldering the cable joints properly, taping with 660 V. Grade water proof tape, making new loop terminals heating and vernishing with 'E' class golden vernish (Jhonson & Nicolson make) so as to develop original rated rpm, supplying all necessary materials as mentioned above and reassemblying the motor.17.5 H.P / 20H.P 3 Phase 415 votls, 50 Hz 2 / 4 pole induction Motor (i) Supply of super enamelled dual coated copper wire conforming IS 13730, 1996, part 13 (16 swg to 22 swg) Required max. weight of super enamelled copper wire is given below: 1) Elmeck/G.E.C(New) / Crompton/N.E.C /KRILOSKAR NEW - 10.2 kg. (2) Bicco/A.E.I -13.1 Kgs. (3) Kirlosker (New) -10.5 Kg |
| 3 | Labour charge for rewinding , soldering, heat varnishing, bearing changing, reassemling etc. including supply of all materials excluding bearing as mentioned above complete in all respect as per direction of E.I.C |
| 4 | Socketing with C.I socket at enlarged bearing housing of any type of 17.5 H.P / 20 H.P motor by oversizing the bearing housing by machine turning & suppling new socket of required size and fitting the same in bearing housing. |
| 5 | Repairing of damaged motor shaft by metaling with electric welding and turning properly to house in the bearing space and coupling side teeth and also rectifying the dynamic balance of the rotor to its original alignment to avoid any vibration all complete as per direction of the E.I.C. |
| 6 | Testing of repaired motor by contious 8 hrs running on load as per direction of E.I.C. |
| 7 | Labour charge for carriage of motor from store to workshop and back to store after repair. This item is only applicable when written permission is available from E.I.C. where there is no facility for such work in the sub- division. |
| 8 | Painting two coats of both inner & outer portion with best quality synthetic enamel paint (to be approved before use) including smoothing surface by sand paper for removing old paint as per direction of E.I.C. (a) Motor |
| 9 | Heat varnishing with best quality (Johnson & Johnson / Dr. Beck! Giliander) class 'E' insulating varnish of required quantity for 3 course & uniform heating at 800ᵒ C for 48 hrs. with all cost of materials, labour as per direction of E.I.C. (c) Insulating varnish 1 lit for 20 HP induction motor. |
| 10 | Supplying, fitting and fixing stud bolt with nuts and washer for upper flange as per sample. |
| 11 | Deduction towards dismantled burnt enamelled copper wire from induction motor on the basis of actual measurement to be retained by the agency. |
| 12 | Add 18% GST |
| 13 | Add 1% Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender