Youth Affairs and Sports and Culture Statutory Bodies & Commissions/Committees Closing in 3 days TDR #58391141

Tender For Conservation Works To The Main Museum Facade Elements Of Hill Palace Museum, Thrippunithura, Ernakulam District, 2026-27

Issued by Statutory Bodies & Commissions/Committees · Ernakulam, Kerala
Tender Value
43.16 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
3 days left
EMD
50000
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Conservation Works To The Main Museum Facade Elements Of Hill Palace Museum, Thrippunithura, Ernakulam District, 2026-27

BOQ

Name of Work:- Conservation works to the main museum facade elements of Hill Palace Museum, Thrippunithura, Ernakulam District, 2026-27
Sl. No. Item Description
1Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
2Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.
3Providing and laying in position cement concrete 1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)excluding the cost of centering and shuttering - All work up to plinth level.
4Plastering with 12 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand).
5Providing and fixing 20 mm PVC pipe 12 Kgf/cm2, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc.
6Providing and fixing 50 mm dia 10Kgf/cm2 PVC pipe including jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
7Providing and fixing 110 mm dia 4 Kg/cm2 PVC pipe includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge.
8Providing and fixing 110 mm dia PVC Elbow for Rigid PVC pipes, including jointing with PVC solvent cement.
9Providing and fixing 110 mm dia 45 degree PVC Elbow for Rigid PVC pipes, including jointing with PVC solvent cement.
10Providing and fixing 110 mm dia PVC door elbow for Rigid PVC pipes, including jointing with PVC solvent cement.
11Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS: 15622, of approved make in colours White, Ivory, Grey, fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
12Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
13Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
14Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.
15Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
16Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
17Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore.
18Providing and fixing C.P brass Angle valve for basin mire and geyser points of approved make conforming to IS: 8931 . 15 mm nominal bore.
19Providing and fixing Rectangular shape 453x357 mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing.
20Providing and fixing wash basin with White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap, C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.
21Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
22Dismantling tiled roofing without battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
23Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area 40 square centimetres and above.
24Hire and labour charges for covering the dismantled roof with tarpaulin / silpaulin tying with coir rope to protect from bad weather and to prevent the damages of roof timber works and to protect the things and valuable materials which kept on the building and dismantling the same when completing the conservation work.
25Providing Second class teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).
26Supplying and fixing departmental wood wrought and put up for roof members including cost and conveyance of materials etc. complete.
27Reapering with second class teakwood reaper of size 50 x 25 mm and wire nails 50 mm long including all cost & conveyance and labour charges etc. complete.
28Supplying Pressed clay tile (Mangalore pattern) Hip & ridge tiles of standard size and approved pattern including cost and conveyance etc. complete.
29Providing and laying departmental M.P roof tile in line and level as per the direction of the departmental officer at site.
30Providing and fixing departmental clay ridge tile set in cement mortar 1:4 (1 cement :4 coarse sand) including finishing edges with red oxide etc. complete.
31Providing valley sheet with 20 gauge aluminium sheet fixing rafter with spike/wire nails and PVC washers with necessary overlaps including all cost of materials and labour charges etc. complete.
32Providing and fixing 30 mm thick second class teak wood glazed shutters for door, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. Pressed butt hinges bright finished of required size with necessary screws.
33Protective coating to the wooden members two or more times as instructed by the departmental officer at site with CNS (cashew shell oil) mixed with diesel at 1:1 (1 diesel & 1 CNS oil) including all the cost of materials and labour charges etc. complete.
34Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete.
35Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead: Cement mortar 1:4 (1 cement: 4 coarse sand).
36Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm.
37Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58391141
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43.16 Lakhs
LAST DATE 24-11-2026
Authority
Authority Name Directorate Of Archaeology
Work Description Tender for Conservation Works To The Main Museum Facade Elements Of Hill Palace Museum, Thrippunithura, Ernakulam District, 2026-27
Basic Detail
Tender No ARCDA/1171/2026-T3
Bidding Type Tender
Location
City Ernakulam
State Kerala
Key Dates
Publish Date 05 Nov 2026
Submission Date 24 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 43.16 Lakhs
Tender Fee 2500
EMD 50000
Exemption Available
Document List
654689ba-b9a0-4249-8648-0dff0f681c35.html
AgreementForm.pdf
BOQ_1511165.xls
Paymentform.pdf
TenderDocuments.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

654689ba-b9a0-4249-8648-0dff0f681c35.html

pdf

AgreementForm.pdf

xls

BOQ_1511165.xls

pdf

Paymentform.pdf

pdf

TenderDocuments.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender