Defence Statutory Bodies & Commissions/Committees Closing in 6 days TDR #58390158

Tender For Special Repair /Renovation Of Toilet And Bathrooms Block And Replacement Of Window At Bldg No P-81 (Otm Accn) In Inf Bn No -3 At Gandhinagar Mil Stn

Issued by Statutory Bodies & Commissions/Committees · Gandhinagar, Gujarat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Nov 2026
6 days left
EMD
58000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair /Renovation Of Toilet And Bathrooms Block And Replacement Of Window At Bldg No P-81 (Otm Accn) In Inf Bn No -3 At Gandhinagar Mil Stn

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 18-Nov-2026 Amdt to critical dates. Date 28-Nov-2026
2 18-Nov-2026 Amdt to tender documents and BOQ BOQ 28-Nov-2026

BOQ

Name of Work:- SPECIAL REPAIR /RENOVATION OF TOILET AND BATHROOMS BLOCK AND REPLACEMENT OF WINDOW AT BLDG NO P-81 (OTM ACCN) IN INF BN NO -3 AT GANDHINAGAR MIL STN
Sl. No. Item Description
1Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified and directed by Engr-in-Charge.
2M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and directed.
3M&L for except brick work retrieved item no. 2 with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and directed.
4M & L brick work with old size sub-class ‘B’ bricks,(OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.
5Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
6M&L rendring 10mm thick on fair faces of brick work or concrete surfaces on walls, finished even and smooth without using extra cement in CM 1:6 complete all as specified and directed by Engr-in-Charge.
7M&L for rendering cement plaster 5mm thick in cement mortar 1:3 on fair faces of concrete in ceilings, chajjas, fins facia etc. finished even and smooth without using extra cement complete all as specified and directed.
8M&L for rendering 12mm thick in CM 1:4 on stone wall surfaces fair faces of brick work & finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) complete all as specified and directed.
9Material and labour for preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified and directed.
10M&L for prepration of old surfaces of ceilling and applying two coat of white wash complete all as specified and directed.
11M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means and preparation for next treatment complete all as specified and directed.
12M&L for 1mm thick wall care putty on walls surface incl prepare to surface for next treatment complete all as specified and directed.
13Material and labour for existing prepared surface of walls & applying two coats of cement base paint over a coat of primer complete all as specified and directed.
14M&L for distempering with 1st quality acrylic distemperof required shade and colour complete, two coats on existing prepared walls surface complete all as specified and directed.
15Dismantling floor hearth or wall tiling including cement mortar and plaster, bedding but not backing removing serviceable tiles to store and rubbish of the premises complete all as specified and directed.
16M&L for Glazed ceramic coloured tiles 7-8 mm thick in vertical surface exceeding 0.12 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified and directed by Engr-in-Charge.
17Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. and Laid bedded and pointed in any mortar complete all as specified and directed
18M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed 15mm thick 1:6 cement mortar complete all as specified and directed by Engr-in-Charge.
19M&L for rounding to edges of stone/granite slabs one edge such as in steps cooking platform , window cill and other situations complete all as specified and directed
20Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete all as specified and directed by Engr-in-Charge.
21M&L for 25 thick cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in levelling coarse for tiles. complete all as specified and directed.
22Material and labour coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.
23M&L for machine cut kota stone slab flooring 18-20mm thick in steps, jambs, pillars, window- cills, cooking platforms, floors and like in cement mortar (1:4) including pointing in grey cement (1:2) using marble dust with admixture of pigment to match with shade of kota stone including rubbing and polishing complete all as specified and directed by Engr-in-Charge.
24M&L for 75 mm thick PCC 1:3:6 type B1 using 20 mm graded stone aggregate as in plinth protection surface finished fair and even complete all as specified and directed.
25Taking down chowkhats (without taking off shutters from the frames) chowkatts n exc 1.5 sqm each complete all as specified and directed.
26Taking down chowkatts (without taking off shutters from the frames) chowkatts exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed by Engr-in-Charge.
27S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for three/two tracks shutters, frames,grills, doors, windows, ventilators and partitions (Fixed portions), slinding windows,ventilators including providing and fixing hinges/ pivots/rollers and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified and directed.
28Supply only 4 mm thick glass sheet any shade tint glass, ordinary quality and glazing with rubber bedding in square & any size in each pane complete all as specified and directed by Engr-in-Charge.
29Supply only 3mm thick glass sheet froasted glass, ordinary quality and glazing with rubber bedding in square n exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge.
30S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
31M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
32S&F Factory Made Solid PVC Moulded Door Shutter with particle board , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm thick plain colour PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.
33Supply and fixing stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws complete all as specified and directed.
34S&F aluminium anodised barrel tower bolt 150mm size extruded section, ISI marked & fixed complete all as specified and directed.
35S&F extruded aluminium alloy handles 150mm size fabricated type anodised. ISI marked. complete all as specified and directed.
36S&F 250 mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, ISI marked complete all as specified and directed..
37Taking up or down 15mm steel tubing and connections, complete all as specified and directed by Engr-in-Charge.
38S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified and directed by Engr-in-Charge.
39Supplying and laying of 20mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.
40S&F for CPVC PIPE OUTER DIA 20MM Brass Elbow (3/4 X ½) complete all as specified and directed
41Taking up or down 20mm steel tubing and connections, complete all as specified and directed by Engr-in-Charge.
42S&F 20mm GI tubing Medium grade fix to wall/floor complete all as specified and directed by Engr-in-Charge.
43Taking up or down 25mm steel tubing and connections, complete all as specified and directed by Engr-in-Charge.
44S&F 25mm GI tubing Medium grade fix to wall/floor complete all as specified and directed by Engr-in-Charge.
45M& L for Cutting chases, pinning in, for brick walls, making good to facings for concealed water tubing etc. cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed.
46Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.
47S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 20 mm dia complete all as specified and directed by Engr-in-Charge
48S&F in repair for 20mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
49S&F in repair for 25mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
50Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar upto 110mm and 75mm bore of pipe from wall/floors etc complete all as specified and directed.
51S&F, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including 'Z' clamp complete all as specified and directed.
52S&F 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
53S&F, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
54S&F, 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.
55S&F, 110mm bore PVC vent cowl complete all as specified and directed.
56M&L, in repair, PVC (SWR) Gully trap 125/100mm ssetting and jointing with cement mortar (1:1) complete all as specified and directed.
57S&F, in repair, PVC (SWR) floor trap, with SS grating including jointing with solvent cement, dia of outlet 75mm complete all as specified and directed.
58S&F, in repair, 40mm bore, low density polyethelene pipe (LDPE) of pressure rating 6kgf/sq.cm fixed to walls, ceilings or in floors etc. complete all as specified and directed.
59S&F in repair 15mm bore dia pipe fancy type bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.
60S&F in repair 15mm bore dia pipe fancy type long body bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed omplete all as specified and directed by Engr-in-Charge.
61S&F in repair 15mm bore dia pipe angle valves/stop valve ,fancy type, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and directed by Engr-in-Charge.
62S&F in repair vitreous China squatting pan 'Orissa pattern' size 580x440 mm, white with integral foot rest including 'P' or 'S' trap front or back inlet excluding flushing cistern and flush pipe including connection to trap and flushing pipe etc and making good to floor complete all as specified and directed.
63Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified and directed.
64S&F in repair PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity low level, white, with intel, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-Charge.
65S&F in repair PVC connection of 15mm bore with 2 Nos. PTMT nuts, 60cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge.
66S&F in repair 15mm bore dia pipe fancy type swan neck pillar tap cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified and directed.
67S&F in repair looking mirror 5 mm thick selected quality of any size including necessary moulding , stainless steel cup and washer etc complete all as specified and directed.
68S&F in repair tubular towel rail, stainless steel, 20mm dia, ‘D’ type, 60cm long between flanges fixed to wall complete all as specified and directed.
69S & F in repair Soap dish, size 120 x 85mm stainless steel, standard size Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
70S&F in repairs vitreous china counter top/down basin size 450 x 525 x 195 mm shape oval including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified and directed.
71S& F in repairs Vitreous China Urinal heavy wit high quality ceramic round/Male /Men urinal pot of size width 38cm , height 62cm and depth 31cm including PVC waste pipe 32 mm bore and CP waste coupling and including steel fastner fixed to wall complete all as specified and directed.
72M&L for water proofing of sunken portion consisting under mentioned items :-(i) 15 mm thick plastering in C:M 1:3 with liquid WPC at all around and base of sunken floor with proper slope.(ii) Applying a coat of bitminous primer @ 0.30 litre/sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), sealed by torching including demolition and removal of old concrete and provn of new lean cement concrete 1:5:10 type E 2 using 40 mm graded stone aggregate specified complete all as specified and directed. Please Enable Macros to View BoQ information
73M&L for water proofing of sunken portion consisting under mentioned items :-(i) 15 mm thick plastering in C:M 1:3 with liquid WPC at all around and base of sunken floor with proper slope.(ii) Applying a coat of bitminous primer @ 0.30 litre/sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), sealed by torching including demolition and removal of old concrete and provn of new lean cement concrete 1:5:10 type E 2 using 40 mm graded stone aggregate specified complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58390158
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair /Renovation Of Toilet And Bathrooms Block And Replacement Of Window At Bldg No P-81 (Otm Accn) In Inf Bn No -3 At Gandhinagar Mil Stn
Basic Detail
Tender No GE(A)/GNR/TOKEN/100 of 2026-27
Bidding Type Tender
Location
City Gandhinagar
State Gujarat
Key Dates
Publish Date 18 Nov 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 58000
Exemption Available
Document List
701217a6-afec-4f33-a8cd-137527f221cb.html
BOQ_894490.xls
TenderDocuments.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 18, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 6 days
Nov 28, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 6 days
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

701217a6-afec-4f33-a8cd-137527f221cb.html

xls

BOQ_894490.xls

pdf

TenderDocuments.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender