Tender For repair maintenance Of electrical installation & Fans I/C Compound/Street Lighting, Fire Fighting, Water Purifier Cum Water Cooler And Air Conditioner At Distt. Social Welfare Office (Nw-I & Ii), Indra Nagar, Azadpur, Delhi-33. During The Y
Tender Value
22.30 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
0 days left
EMD
44619
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for repair maintenance Of electrical installation & Fans I/C Compound/Street Lighting, Fire Fighting, Water Purifier Cum Water Cooler And Air Conditioner At Distt. Social Welfare Office (Nw-I & Ii), Indra Nagar, Azadpur, Delhi-33. During The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | SH-I EI WorkOperation and maintenance of electrical and mechanical installations at Distt. Social Welfare Office (NW-I & II), Indra Nagar, Azadpur on all working days including sunday and holidays or as per directions of Engineer-in-charge, terms and conditions etc. as required for operation and maintenance of EI and Fans,Pump sets etc.(1) Wireman cum Pump Operator - 3 Nos. (One in each shift : 6 AM to 2 PM , 2 PM to 10 PM and 10 PM to 6 AM.)(2) Khallasi - 1 No. ( 9 AM to 5 PM in General shift) |
| 2 | Comprehensive, running maintenance & Servicing of following capacity Window / Split installed under Distt. Social Welfare Office (NW-I & II) i/c replacement all defective i.e. blower motor, compressor, Gas Charging, PCB, remote, Plug Top, Starting Capacitor, Running Capacitor, Starting Relay, Thermostat, Propeller Fan, Over load Relay i/c condenser unit, evaporative unit charging of refrigerant gas in case of leakage i/c refrigerant gas pipe with insulation, lead wire, plug Top, etc complete as per terms and conditions attached:-Window type AC/ Split type AC of 1.5TR/2.0 TR capacity. (14 Nos. AC for 8 Months = 112 Jobs) |
| 3 | Water coolers of capacities 100/150 ltr (2 Nos. for 12 Months-24 Jobs) |
| 4 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C |
| 5 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.Group-C |
| 6 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way (4 + 24), Double door |
| 7 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)12 way , Double door |
| 8 | 8 way , Double door |
| 9 | Lifting of existing submersible bore well / open well 3HP to 10 HP capacity Pump set from the bore well with chain pulley block & tripod stand i/c cartage charge at site from the work shop. |
| 10 | Lowering of 3 HP to 10 HP capacity bore well/open well pumpset in the bore well with chain pulley block and tripod stand i/c cartage charge pump set from work shop to site credit of old dismantle etc, as reqd. |
| 11 | Repairing of Submersible/monobloc Pumpset of following capacity i/c replacement of mechanical seal TC/TC upper, mechanical seal TC/TC lower, ball bearing, 'O' Ring, stamping repairing, including dismantling, assembling, commissioning and testing the same on load after making electric connections at site i/c site visit by Engineer and to & fro from site to workshop & back to site etc. complete with credit of dismantle etc as required.3 HP |
| 12 | Rewinding of following capacity Pumps, 3 phase multistage submersible / monoblock-submersible Pump-set with suitable size water proof copper conductor wire and dismantling the existing burnt wire, reassembling the pump and to & fro from site to workshop & back to site, etc. i/c buy back of dismantle materials i/c connection, testing etc as reqd.3 HP |
| 13 | SH-II (Supply of materials) Note:- No labour is considered for fixing of these items5/6 A switch (Modular type) |
| 14 | 15/16 A switch (Modular type) |
| 15 | 3 pin 5/6 A socket outlet (Modular type) |
| 16 | Bell push (Modular type) |
| 17 | Telephone socket outlet |
| 18 | 6 pin 15/16 A socket outlet (Modular type) |
| 19 | Stepped type Modular Fan regulator (2 module) |
| 20 | 1 or 2 Module Modular base & Cover plate |
| 21 | 3 Module Modular base & Cover plate |
| 22 | 6 Module Modular base & Cover plate |
| 23 | 8 Module Modular base & Cover plate |
| 24 | 12 Module Modular base & Cover plate |
| 25 | 5A to 32Amp SP MCB 10kA rating \\"C\\" Curve |
| 26 | 3 pole MCCB, 100A, 16kA (Ics = 100% Icu) |
| 27 | 3 pole MCCB, 200A, 25kA (Ics = 100% Icu) |
| 28 | 1.5 sq. mm sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 29 | 4 sq. mm sq. mm sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 30 | 6 sq. mm sq. mm sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable |
| 31 | 18- 22 watt 4 feet Indoor commercial LED batten fitting (System lumen efficacy ≥105 <120 lm/Watt) with Powder coated die cast /Extruded aluminium Body (Thickness >1.20 mm). |
| 32 | 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor with remote or electronic regulator. |
| 33 | 40 watt Panel Down light 2x2 ft. LED Panel light 2x2 ft. (System lumen efficacy ≥120 <135 lm/Watt) Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) |
| 34 | 18 watt LED Down lighter (SMD Type) (System lumen efficacy ≥120 <135 lm/Watt ) Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector |
| 35 | 100 watt LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy >135 lm/Watt) |
| 36 | 40/63 Amp, SPN MCB 10kA rating \\"C\\" Curve |
| 37 | 40/63 Amp TP MCB 10 kA rating \\"C\\" Curve |
| 38 | Heavy duty exhaust fan of 300 mm sweep 900 rpm. |
| 39 | Heavy duty exhaust fan of 380 mm sweep 1400 rpm. |
| 40 | 400 mm PVC body wall mounted bracket fan sweep with air delivery not less than 80 cm and of 1300 rpm. |
| 41 | 35-40 Watt LED post top lantern fitting having die cast aluminium body with minimum 100 lumens per watt. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender