Tender For Work Of Beautification And Installation Of Statue Of Sant Ravidas/Dr. Ambedkar Ji Park In Gram Sabha Khushipur.
Tender Value
8.47 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
13 days left
EMD
16940
Bank guarantee accepted
Document Fee
766
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Work Of Beautification And Installation Of Statue Of Sant Ravidas/Dr. Ambedkar Ji Park In Gram Sabha Khushipur.
BOQ
| Sl. No. | Item Description |
| 1 | earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. I/c as per DSR2023 code 2.8.1 |
| 2 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. I/c as per Dsr2023 code 2.25a |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per DSR 2023 code 4.1.8 |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.As per Dsr 2023 code 2.27 |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). i/c as per Dsr 2023 code 5.3 |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) I/c as per Dsr 2023 code 5.1.2 |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) I/c as per Dsr 2023 code 5.2.2 |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)i/c as per Dsr 2023 code 6.1.2 |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. I/c as per Dsr 2023 code 5.22.6 |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete I/c as per dsr 2023 code 5.9.1 |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform I/c as per dsr 2023 code 5.9.3 |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers I/c as per dsr 2023 code 5.9.5 |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts I/c as per dsr 2023 code 5.9.6 |
| 14 | E/w in cutting or embankment in o/s excavation to be the form of regural pits not exceeding 1/2meter(20\\") in depth and ew in embankment to be in 20cm layer including ramming and dressing the surface to required levels and slopes and also including 1.50m lift and 30m lead the earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m distance as directed by E/I I/c as per S.I no 253 including cartage upto 3.00km |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)i/c as per Dsr 2023 code 6.4.2 |
| 16 | 12 mm cement plaster of mix ::1:6 (1 cement: 6 fine sand) I/c as per Dsr2023 code 13.1.2 |
| 17 | 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) i/c as per Dsr 2023 code 13.2.2 |
| 18 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. I/C as per DSr 2023 code 5.30 |
| 19 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality I/C as per DSr 2023 code 11.23.1 |
| 20 | 6mm thick plaster of mix 1:3 with cement and fine sand I/c as per Dsr2023 code 13.16.1 |
| 21 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates efc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). I/c as per dsr 2023 code no 10.28 |
| 22 | Providing coat and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One of with less self-priming of elastomeric waterproofing liquid (dilution water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer- in-Charge. I/c as per dsr 2023 code 22.22A |
| 23 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre I/c as per dsr 2023 code 13.41.1 |
| 24 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)I/c as per dsr 2023 code 13.47.1 |
| 25 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.I/c as per dsr 2023 code 13.80 |
| 26 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110mm dia I/c as per dsr 2023 code 12.41.2 |
| 27 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 28 | E/w in excavation in foundation in o/s including lift upto 1.50m and lead upto 30m and including filling watering and ramming of excavated earth into space between the building and sides of foundation trenches or into plingth and removal and disposal of suplus earth as directed by engineer in charge upto a distance of 30 m from the foundation trenches I/c T&P as per S.I no 251 |
| 29 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per DSR 2023 code 4.1.8 |
| 30 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) I/c as per dsr 2023 code 6.1.1 |
| 31 | Providing and laying of interlocking concreat block pavements having thickness 80mm including leveling and dressing of surface to required level and slope ,spreading and moisting 30 mm thick locak sand on bed , filling joints with local sand etc for proper completion of the work as per drawing and technical specification clause 1504 as per mord specification no 1504. 50% RED BASE |
| 32 | Providing and laying of interlocking concreat block pavements having thickness 80mm including leveling and dressing of surface to required level and slope ,spreading and moisting 30 mm thick locak sand on bed , filling joints with local sand etc for proper completion of the work as per drawing and technical specification clause 1504 as per mord specification no 1504. 50% GREY BASE |
| 33 | P&F 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby redArea of slab over 0.50 sqm I/c as per dsr 2023 code 8.2.2.2 |
| 34 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work as dsr2023 code 8.3.1 |
| 35 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)i/c as per Dsr 2023 code 6.1.2 |
| 36 | Concrete with 20 mm gauge approved stone grite approved coarse sand and cement in the proportion of 4:2:1 i/c supply of all materials, labour & T & P etc. required for completion of work. SI No. 279(B). |
| 37 | Supply of Pre cast rcc three seater garden bench with M-15 concrete (size 1500*600*450mm) I/c M.R |
| 38 | Supply of informatory M.s sign board size 1.20*0.90 m made of 0.80mm M.s sheet fixed in ISA 40*40*5mm,frame supported in back side by 32*5mm flat iron on all four side along with two vertical post of 2.90m from bottom of frame of angle iron ISA 40*40*5mm with 0.25m long horizontal leg electrically welded and painted with one coat synthetic enamel paint I/c Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender