Tender For Provision Of Aluminium Partition And Grill In Balconies Of P-22,P-23 And P-24 Type-Ii Ep Married Accomodation And Provision Of Galvalume Shhet Shed In Front Of Family Welfare Canteen(P-59) Building And Provision Of Interlocking Tiles Besid
Tender Value
27.70 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
15 days left
EMD
55400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Midnapore → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Aluminium Partition And Grill In Balconies Of P-22,P-23 And P-24 Type-Ii Ep Married Accomodation And Provision Of Galvalume Shhet Shed In Front Of Family Welfare Canteen(P-59) Building And Provision Of Interlocking Tiles Beside Cgkg School At Azadhind Nagar Haldia And Installation Of Upvc Sliding Window At Pol Accomodation Building At 7.65 Acre Land Frazerganj And Provision Of Electrical Associated Fittings At Testing Hall At Ssb(Kol) Diamond Harbour And Provision Of 03 Nos 2 Ton Capacity Inverter Split Air Conditioners At Nau(Kol)/Niu(Wb) Under Ge(I) (Cg&N) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | M&L for aluminium sections for side hung/sliding window and partitions etc. with suitable sections for frame and shutter fixed with dash through holder fastener with length not less than 75mm to walls/floors including locking arrangement and rubber gusket necessary channel, neoprene beading, clips, fixing screws, nuts etc. complete all as specified and as directed. |
| 2 | S & F Anodised aluminium window and ventilator shutters,side hung/sliding type with styles,rails,sash bar,sliding frame etc all are made from aluminum anodised section weighing 0.55 kg/m including necessary joining cleats ,glazing clips, rubber packing with locking system anodised aluminium snap beading screws complete all as specified and as directed. |
| 3 | S&F Anodised aluminium door shutters(minimum thickness of ,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, stopper, tower bolt - 02 Nos anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 4 | S&F anodised aluminium grill, 10mm thick, diamond shape with apareture 75mm fixed to windows including u type frame and nut complete all as specified and as directed. |
| 5 | S&F sheet glass 4.0 mm thick ordinary quality and glazing with oil putty square, rectangle n.exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 6 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified as directed. |
| 7 | M&L for Preparation newly or previously untreated steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 8 | S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixedrubber gusket necessary channel, neoprene beading, clips, fixing screws, nuts etc. complete all as specified and directed |
| 9 | S&F 18mm thick LEAD FRE PVC celuka ply of single side rigid laminated of approved colour and other side plain white colour fixed with screws or cabinet hinges including L Bihari Hinges and cement adhesive to make kitchen/bedroom cabinet sides top and bottom and shelves inside the cabinet complete all as per manufactures specification complete all as specifiied and as directed by Engr-in-Charge |
| 10 | Excavating in post holes (or similar holes) in hard and dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed. |
| 11 | Demolition of brick work built in cement mortar in any description and position, complete all as specified and as directed. |
| 12 | M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar (1:6) complete all as specified and as directed. |
| 13 | M&L for providing PCC (1:2:4) type B2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed. |
| 14 | Dismantling of plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering complete all as specified and as directed. |
| 15 | Supply & Fixing Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 16 | M&L Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick any colour having tensile strength of 550 Mpa as in ridges, hips valley gutter etc fixed with self tapping screws ccomplete all as specified and as directed. |
| 17 | S&F steel work in tubular including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979St grade St-240 complete all as specified and as directed. |
| 18 | M&L for rendering 15mm thick plastering on fair faces of brick work or concrete surfaces in CM (1:4) mixed finished even and smooth without using extra cement complete all as specified and as directed. |
| 19 | M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint on plastered surfacescomplete all as specified and as directed. |
| 20 | M&L for Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 21 | Removing excavated surplus soil to a distance exc 1.5 km and n. exc 5.0 km and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & as directed. |
| 22 | Demolition of cement concrete in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 23 | M&L for hardcore of broken stone or boulders gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, ccomplete all as specified and directed. |
| 24 | M&Lfor 150mm thick Plain cement concrete type D-2 (1:4:8) using (40mm graded aggregate) with floor even and rough all as specified and as directed by Engr-in-Charge |
| 25 | M & L for sand filling under floor or foundation for watering and consolidation all as specified and as directed by Engr-in-Charge |
| 26 | M&L providing coloured dense 60 mm thick Machine pressed precast concrete interlocking paver block, shape and size conforming to IS 15658-2006 of M-35 grade ,laid with grey cement and pigment all as specified and as directed by Engr-in-Charge |
| 27 | M&L for cement concrete (1:1.5:3) type B-1 using 20 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed |
| 28 | M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping on top of brick edging and like including necessary form work complete all as specified and directed. |
| 29 | M&L for applying three coats of white wash on new plastered wall surface including prepartion of surfaces complete all as specified. |
| 30 | Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 31 | S&F 5.5mm thick sheet glass ordinary quality alongwith EPDM rubber all around the glass edges exc 0.50 sqm in each pane and fixed into aluminium frame work complete all as specified and as directed. |
| 32 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples all as specified. |
| 33 | M&L for cutting in stone walls /RCC walls built in cement mortar exc 1 brick thick and not exc 2 brick thick completed all as specified and directed |
| 34 | S & F for plates(plain or chequered) FE-290 grade E-165 channels, square cut or notched(ordinary and counter shunk) forming holes, without any attachement fixed with and including nutwasher completed all asspecified and directed |
| 35 | M&L preparation of old plaster surfaces of wall and applying two coats of exterior emulsion paint over one coat of primer including one coat of putty(weather coat) complete all as specified. |
| 36 | M & L for concealed type point wiring with 1.5 sqmm (Nominal Area) FRLS PVC insulated un sheathed multi stranded copper conductor, 1100 Volts grade, in and including PVC conduit medium duty (ISI marked) not less than 20 mm dia with accessories such as bends, cross, elbow, tees etc. of suitable size including continuous earth wire FRLS PVC insulated unsheathed 1.5 Sq mm(nominal area) copper multi-stranded conductor, 1100 Volts grade, connecting to common earth and earth dolly for Light/Ceiling fan/Exhaust fan complete all as specified and as directed. |
| 37 | All as per item No 36 above but for One bell/buzzer point controlled by one push button on the same board withother switches or independent with cables complete all as specified and directed |
| 38 | All as per item No 36 above but for one socket outlet, 5 amp same board complete all as specified and directed. |
| 39 | All as per item No 36 above but for one socket outlet, 5 amp on independent board complete all as specified and directed. |
| 40 | M&L for concealed type power point wiring for one socket outlet, 15 amp on independent board but using 4.0 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor 1100 volts grade complete complete all as specified and directed |
| 41 | S & F 6 Amps one way single pole switch modular type complete all as specified and as directed. |
| 42 | S & F 16 Amps one way single pole switch modular type complete all as specified and as directed. |
| 43 | S & F Modular socket outlet 2/3 pin 6 amp' three module complete all as specified and as directed. |
| 44 | S & F Modular Socket, 6/16A - 2/3 pin combined 2 module independent complete all as specified and as directed. |
| 45 | M & L Ceiling rose, surface type polycarbonate/ PVC three terminals, for tube light, conforming to IS complete all as specified and as directed. |
| 46 | S & F modular metal box 2 way complete complete all as specified and as directed. |
| 47 | S & F modular white cover plate with frame 2 way complete all as specified and directed |
| 48 | S & F modular metal box 3 module complete all as specified and as directed. |
| 49 | S & F modular white cover plate with frame 3 way complete all as specified and as directed. |
| 50 | S & F modular metal box 4 module complete all as specified and as directed. |
| 51 | S & F modular white cover plate with frame 4 way complete all as specified and as directed. |
| 52 | S & F modular metal box 6 module complete all as specified and as directed. |
| 53 | S & F modular white cover plate with frame 6 way complete all as specified and as directed. |
| 54 | S & F modular metal box 8 way complete all as specified and as directed. |
| 55 | S & F modular white cover plate with frame 8 way complete all as specified and as directed. |
| 56 | S & F LED batten 4 ft 20 Watt, IP 65 with minimum system efficency 100 lumen/watt complete all as specified and as directed.. |
| 57 | Supply and fix LED street light 35 IP 65 for Bldg Security light with minimum system efficacy 100 lumen/watt including all necessary bracket and fittings complete all as specified and as directed. |
| 58 | S & F fan regulator step type electronic flush 2 modular type complete all as specified and as directed. |
| 59 | S & F blanking plate PVC complete all as specified and directed. |
| 60 | S&F modular bell push flush type 5A SP 230 Volts complete all as specified and as directed. |
| 61 | S&F call bell ding dong type 230 Volts complete all as specified and as directed. |
| 62 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 63 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete as specified and as directed. Please Enable Macros to View BoQ information |
| 64 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender