Tender For Providing Repair And Renovation Work Of 54 Unsold Flats In 168 Flats At Sholinganallur Phase-Iii, Chennai District
Tender Value
1.38 Crore
Estimated cost
Bid Submission
20 Nov 2026
14 days left
EMD
80000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Repair And Renovation Work Of 54 Unsold Flats In 168 Flats At Sholinganallur Phase-Iii, Chennai District
BOQ
| Sl. No. | Item Description |
| 1 | Repair and Renovation work of 54 unsold flats |
| 2 | Cleaning of unsold flats at every floor in the following procedure of 1. Remove the waste matter dumped by brushing the surface.2. Hose up the area in full force to get the area slightly dampish, then use an all-purpose cleaner while scrubbing the area and then hose it up again.3. Scrub off the excreta residue. Sprinkle a pinch of floor cleaning liquid on to the infected area and scrubbing until the stain goes away.4. Clean by mopping the floor 2 times and allow it to dry completely.The including cost of materials required for cleaning and hire charges for tools & plants and labour charges etc., complete in all respects and as directed by the departmental officers. |
| 3 | Supplying and fixing in position 15mm dia Brass Chromium Plated Screw Down Short Body tap (heavy duty) of approved make conforming to BIS specifications and quality including Labour charges, cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 4 | Supplying and fixing in position SS Heavy Duty Long Body Tap 15mm (heavy duty) of approved make conforming to BIS specifications and quality including Labour charges, cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 5 | Supplying and fixing in position SS Swan neck tap (heavy duty) of approved make conforming to BIS specifications and quality including Labour charges, cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 6 | Supplying and fixing in position 15mm dia CP Angle Cock (heavy duty) of approved make conforming to BIS specifications and quality including Labour charges, cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 7 | Supplying and fixing of CP Two Way Bib Cock with Health Faucet ISI or equivalent fitting including cost of fittings labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use) |
| 8 | Supplying and fixing 600mm x 600mm x 200mm stainless steel sink with C.I Bracketone no 32mm lead waste pipe (Bell mouth opening) for 75cm long 15mm dia.lead and brass connections 15mm dia. wheel valve and necessary clamp bolts, nuts etc.complete |
| 9 | Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works). |
| 10 | Supplying and fixing in position CP Wall Mixture Tap 3 in 1 system with Hand Showers arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works) |
| 11 | Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessory PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of “U” clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification and as rected by the departmental officers |
| 12 | Supply and providing 1000 litres capacity Priming Tankmade up of PVC, complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works). |
| 13 | Wash Basin of size 550mm x 400mm with allaccessories such as Cast Iron Brackets, 32mm dia CPWaste Coupling, Rubber Plug and Chain, 32mm dia 'B'Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mmdia Nylon Connection, 15mm dia Brass Nipples, 15mm CPPillar Tap etc., |
| 14 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm P or S trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting. |
| 15 | Providing and filling the tile joint with epoxy grout with following specification: Surface preparation including cleaning the joint to be free from dust and loose particles.Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly and as directed by the departmental officers. The rate inclusive of cost of materials and labour, etc., complete. |
| 16 | Supplying and Fixing of Fully Panelled Doors - External or Internal Moulded Planks Single Leaf 900 X 2100 Type ‘A’ - ( Single Panels) Etc, Complete Complying With Standard Specification and as Directed by the Departmental officers. |
| 17 | Supplying and Fixing of Fully Panelled Doors - External or Internal Moulded Planks Single Leaf 750 X 2100 Type ‘A’ - ( Single Panels) Etc, Complete Complying With Standard Specification and as Directed by the Departmental officers |
| 18 | UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work. |
| 19 | UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work. |
| 20 | Supplying and fixing of mild steel grills to bed room balcony including cost of necessary screws and cost of applying priming coatof paint etc. |
| 21 | White washing two coats with freshly burnt white shell lime in all ceilling including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed |
| 22 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the (interior)existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 23 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works |
| 24 | Painting Best Varnishing old Wood work two Coats of approved quality in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality of paint should be got approved by the Executive Engineer before use on works). |
| 25 | Painting Old wood work with Two coat of synthetic enamel ready mixed paint of approved quality and colour in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works). |
| 26 | Painting two coat over old wall with Exterior emulsion paint over the prime coat., including cost of brushes, emulsion paints scaffolding curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. ( The quality and shade of paint should be got approved by the Executive Engineer before use). |
| 27 | Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete setf o rAC Plug in flush with wall with earth connection (For AC Plug)., all complete in all respects complying with relevant standard specification and as directed by the departmental officer |
| 28 | Wiring with 2x1.5sq.mm .PVC insulated SC unsheathed FRLS copper conductr cable of 1100V grade insuitable heavy gauge MS conduitpipe on wall and ceiling with MS accessories with switch box with 5A FT switch in flush withwall and covered with hylum sheet of 3mmthick with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for light point / fan point (for electronic regulator) |
| 29 | Supply and fixing of 3 Nos. 5A (3 pin and 2 pin) combined flush type wall socket with control switches concealed insuitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) |
| 30 | Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2\\" x 1-1/2\\" x 1/4\\" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\\" x 1/4\\" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete |
| 31 | SUB TOTAL |
| 32 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender