Tender For Construction Of Boundary Walls For Inspection Houses Under The Irrigation Division Firozabad
Tender Value
3.64 Crore
Estimated cost
Bid Submission
16 Nov 2026
8 days left
EMD
7.30 Lakhs
Bank guarantee accepted
Document Fee
4591
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Firozabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Boundary Walls For Inspection Houses Under The Irrigation Division Firozabad
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in foundation in all types of soil including lift up to 1.5 meter and lead up to 30 meter and including back filling, watering and ramming of excavated earth into the trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal or surplus earth as directed by the Engineer-in-charge up to a distance of 30M from the foundation trenches:(Building)including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 2 | Earth work in cutting or in embankment in all types of soil, excavation to be in the form of regular pits and earth work in embankment to be in 20cm. layers, including ramming and dressing the surface to the required levels and slopes and also including 1.50m lift and above 30 m including all lead also including all cost of T&P etc complete. |
| 3 | Providing and laying in position cement concrete of specified grade 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 4 | Providing and laying in position cement concrete of specified grade 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 40 mm nominalsize derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 5 | Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)excluding the cost of centering and shuttering - All work up to plinth levelincluding cost of all material,labour and T & P etc complete required for proper completion of work. |
| 6 | Providing and laying in position ready mixed or site batched design mix Cement Concrete of M25 grade with minimum cement content of 330 kg /cum for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: All works above plinth level upto floor V level including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 9 | Thermo-Mechanically Treated bars of grade Fe-500D or more.Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto & above plinth level.including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 11 | Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level.including cost of all material,labour and T & P etc completerequired for proper completion of work. |
| 12 | Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS :12894, in super structure above plinth and upto floor V level. Cement mortar 1 : 4 (1 cement : 4 coarse sand)including cost of all material,labour and T & P etc required for proper completion of work. |
| 13 | 40 mm thick damp proof course with cement concrete consisting of 1 part cement 1.5 parts approved coarse sand and 3 parts approved 20mm down graded stone grit and including water proofing material etc. complete. |
| 14 | Provinding & Applying a coat of residual petroleum bitumen og Grade VG-10 of approved quality using 1.7 kg/sqm on DPC after cleaning the surface with brushes and finally with piece of cloth lighty soaked in kerosene oil. |
| 15 | 12mm thick plaster with cement mortar in proportion of 1:4 cement and sand 1.00 fineness modulous over brick work minimum thickness not to be less than 1 cm including supply of 1 material labour and T&P etc.complete required for proper completion of work for all floors. |
| 16 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) External Plaster height upto 10m from ground level including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 17 | Providing and fixing Stainless steel SS grade 304, curtain rod 25 mm dia 1.20 mm thick fixed with SS screws and PVC sleeves etc., wherever necessary complete : |
| 18 | Providing Teak wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 19 | Providing and fixing M.S. grills Fixed to openings /wooden frames with rawl plugs screws etc. of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 20 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works |
| 21 | Providing and fixing aluminium work for For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 microndoors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 22 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5 mm depth and 5 mm width |
| 23 | Providing and fixing 35 mm thick flush door shutters including ISI marked Stainless Steel butt hinges with necessary screws ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. |
| 24 | S/F of 4cm. Thick C.P teak wood fully glazed window shutters I/c supply and fixing of wooden cheats and stops and fittings including painting two coats of black Japan on all iron fittings if necessary including fixing the panes (5mm thick ). |
| 25 | Providing and fixing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . |
| 26 | Providing & Applying white cement based putty of average thickness on new interior surface for smoothering and levelling of the surface as per requirement and direction of engineer in charge including cost of all material, labour T&P etc.complete |
| 27 | Distempering on New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litrewith 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : |
| 28 | Finishing walls with textured exterior paint of required shade on New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm including cost of all material, labour T&P etc. |
| 29 | P/F Ist quality ceramic glazed wall tiles confirming to IS: 15622 of approved make in all colour, shades except burgundy, bottol green, black of any size on walls over 12mm thick bed of cement mortar 1:3 and joining with grey cement shurry@ 3.30 kg/Sqm including painting.(Manufactured KajariaSomani tile,Simpelo,zonsan and Equivalent etc.) |
| 30 | P/F Rectied Glazed ceramic floor tiles of size 300x300mm of 1st quality confirming to IS:15622 in colour white Ivory, Grey fume red brown laid on 20mm thick cement mortar 1:4 including grouting the joints with white cement and matching pigments etc. Complete including supply of all completion of work of floor of toilets.(Manufactured Kajaria,Somani tile,Simpelo,Johnson and Equivalent etc.) |
| 31 | Providing and laying Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 32 | Providing and laying Vitrified tiles of Size 600x600 in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).(Manufactured Kajaria,Somani tile,Simpelo,Johnson and Equivalent etc.) |
| 33 | Providing and laying Vitrified tiles of Size 600x600 (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).(Manufactured Kajaria,Somani tile,Simpelo,Johnson and Equivalent etc.) |
| 34 | Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 35 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : reatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1%concentration |
| 36 | [Providing and laying integral cement base water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved Ly Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compoundconforming to IS : 2645 and approve by Engineer-in charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surfacewith trowel with neat cement slurry and making pattern of 300x300 mm square 3 mmdeep. (e)The whole terrace so finished shall be flooded withwater for a minimum period of two weeks for curingand for final test.\\"All above operations to be done inorder and as directed and specified by the Engineerin-Charge : With average thickness of 120 mm andminimum thickness at khurra as 65mm. With average thickness of 120 mm and minimumthickness at khurra as 65 mm. |
| 37 | Wiring point for light /fan point / exhaust fan point with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, modular type switches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects as directed, including matching color wash. |
| 38 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 39 | Wiring point for light/ Power plug with 2x4 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe along with 1 no 4sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire . |
| 40 | Wiring points for Call bell with 1.5 sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire and piano type bell push or 2pin socket etc.complete in all respects.as directed including matching colour wash. |
| 41 | Supply fixing and concealing of 20mm dia. of medium class PVC conduit pipe with PVC acessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 42 | Supply & wiring of submains with two number 2.5 sq.mm FRLSH PVC insulated single core copper conductor cable in PVC conduit with 1 Number 2.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect.including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 43 | Supply & wiring of submains with two number 4 sq.mm FRLSH PVC insulated single core copper conductor cable in PVC conduit with 1 Number 4 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect. |
| 44 | Supply & wiring of submains with two number 10sq.mm FRLSH PVC insulated single core copper conductor cable in PVC conduit with 1 Number 4 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect. |
| 45 | Supply and Fixing of LED Batten Light with batten suitable for up to 36 watt complete including tube etc. on surface complete in all respect. CAT-AAA |
| 46 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as require |
| 47 | Supply and fixing of 5 Amp to 32 Amp rating, 240/415V ,10KA \\"C\\" Curve miniature circuit breaker suitable for inductive load of single pole and neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 48 | Supplying and fixing following rating, 40Ampdouble pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 49 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 50 | Installation of exhaust Upto 450 mm sweep fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 51 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 52 | Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. |
| 53 | Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. |
| 54 | Supplying, installation, Testing & Commissioning of LED 8 to 10 wattRecessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80 , UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED,Driver & electrical circuitary), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends , CCT 3000°K / 4000°K / 5700°K / 6000°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) |
| 55 | Supplying and fixing 150x75mm x 65 mm size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 56 | Supplying and fixing 200mm x 75 mm size / modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 57 | Providing and fixing 110mm diameter on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. |
| 58 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete. Dia 110x110mm |
| 59 | Providing and fixing unplasticised 110mm -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 60 | Providing, fixing, jointing and testing in position of ISI marked 110 mm dia UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints for vertical pipes and solvent cement joints for horizontal pipes, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, cowels, clamps, hangers, rubber rings, clean outs etc. fixing at wall / ceiling / floor level supported by clamp & hangers etc. inside duct / suspended from floor under false ceiling for proper completion of the work. The rubber ring shall confirm to IS:5382. |
| 61 | Providing and fixing 15 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 62 | Providing and fixing 25 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. |
| 63 | Providing and fixing 32 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 64 | Providing and fixing stainless steel grating of approved quality & colour |
| 65 | Providing and fixing 15mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. |
| 66 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 67 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia |
| 68 | Providing and fixing 25mm dia nominal bore gun metal gate valve with wheel of approved quality. |
| 69 | Providing and fixing 32mm dia nominal bore gun metal gate valve with wheel of approved quality. |
| 70 | Providing and fixing 15mm dia nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete |
| 71 | Providing and placing on terrace Circular Tank (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 72 | Providing and fixing W.C. pan with ISI marked white solid plastic seat and lid white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests(Manufactured Cera, Hindware,parryware,jaquar and Equivalent etc.) |
| 73 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 74 | Providing and fixing White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require(Manufactured Cera, Hindware,parryware,jaquar and Equivalent etc.) |
| 75 | Providing and fixing P.V.C. 32 mm Flexible pipe waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 76 | Providing and fixing PTMT towel rail 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour |
| 77 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter |
| 78 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board 510x1040 mm bowl depth 200 mm as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required |
| 79 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 80 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required,in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes 80mm to 300mm diameter. |
| 81 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) all-round S.W. pipesincluding bed concrete as per standard design : 150mm diameter S.W. Pipe |
| 82 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 19.301 Inside dimensions 455x610 mm and 45 cm deep for single pipe line : 19.30.11 With common burnt clay F.P.S. (non modular) |
| 83 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-incharge, upto 90 metre depth below ground level. (Drilling of 300mm dia bore hole manually.) |
| 84 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. (150 mm nominal size dia) |
| 85 | Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 86 | Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. |
| 87 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 88 | Construction of Septic Tank & Soak Pit including cost of all material,labour and T & P etc conplete required for proper completion of work as per directions of Engineer-in-charge |
| 89 | Excavation in foundation in all types of soil including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 90 | Providing and laying in position cement concrete of specified grade 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 40 mm nominalsize derived from natural sources) excluding the cost of centering and shuttering - All work up to plinth including cost of all material,labour and T & P etc required for proper completion of work. |
| 91 | RCC work Providing and laying in position specified grade of reinforced cement concrete in Raft foundation, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 92 | brick work in 1:6 cement and Coarse sand mortar in foundation and plinth using old & used bricks including supply of all materials(except brick), labour and T&P etc. complete required for proper completion of the work. |
| 93 | 12mm Cement plaster with cement mortar in proportion of 1:3 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 94 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Make- Asian/Berger or equivalent) |
| 95 | Supplying,cutting binding and placing HYSD bar reinforcement in structure complete as per drawing and technical specifications , including overhead charges & Contractors profit but excluding GST.etc. complete including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 96 | Steel work welded in built up sections /framed work , including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required . In gratings , Frames ,guard bar, ladder ,railings ,brackets,gates and similar works.including cost of all material,labour and T & P etc required for proper completion of work. |
| 97 | Providing&Fixing75mm dia & 6 kg/cm2 PVC Drainage pipe for Weep holes including all cost of material,Labour and T&P etc complete |
| 98 | Painting with Synthetic enamel paint of Approved brand and manufacture required colour to give an even shade Two or More coats on New work required for Proper Complition of work.including cost of all material,labour and T & P etc complete required for proper completion of work. |
| 99 | Providing & laying 60 mm Thick factory made cement Concrete Inter Locking Paver block of M-30 grade made by block Making machine with strong Vibratory compaction ,of approved Size , design& shape,Laid in required Colour and pattern over and including 50 mm thick Compected bed of Coarse Sand, filling the Joints with line sand etc.all Complete as per the direction E/I |
| 100 | Supplying and Fixing of Sign board at site having a frame of 900x600x2000 mm fixing at on 35x35x5 mm angle iron including painting and lettering double side complete |
| 101 | Providing and fixing concertina coil fencing with punchedtapeconcertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existingangle iron Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angleiron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 102 | Fencing With G.I. barbed wire with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. |
| 103 | Supply, Stacking and Planting of Mimusops elengi (Maulsri) of ht. 180 to 195 cm. well developed with thick stem in big size of HDPE bag wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure) including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 104 | Supply, Stacking and planting of Nauclea cadamba ( Kadam ) of ht. 150 to 165 cm. In big poly bags of size 25 cm wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure) including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 105 | Supply, Stacking and planting of Azadirachta indica ( Neem ) of ht. 120 to 130 cm. In big polybags of size 25 cm wth diggin holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure)including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 106 | Supply, Stacking and planting of Phllanthus emblica ( Amla ) of ht. 150 to 165 cm. In big HDPE bag wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure)including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 107 | Supply ,Stacking and planting of Cassia fistula ( Amaltash ) of ht. 120 to 135 cm. In big poly bags of size 25 cm. wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure) including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 108 | Supply ,Stacking and planting of Bauhinia purpuea ( Kachnar ) of ht. 150 to 165 cm. In big poly bags of size 25 cm wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure)including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 109 | Supply, Stacking and planting of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure)including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 110 | Supply, Stacking and planting of Phoenix sylvestris Roxb. (Wild date palm/khajur) of height 150-165 cm. in Big HDPE Bagwth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure) including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 111 | Supply Stacking and planting of Plumeria ( Champa ) of ht. 165 to 1800 cm. In poly bags of size 25 cm. wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure)including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 112 | Supply, Stacking and planting of Tectona grandis (Teak/Sagoan) of height 150-165 cm. in big polybags of size 25 cm wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure)including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 113 | Supply ,Stacking and planting of Terminalia arjuna ( Arjuna ) of ht. 165 to 1800 cm. In poly bags of size 25 cm. wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure)including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 114 | Supply, Stacking and planting of Eugenia jambolana ( Jamun ) of ht. 165 to 1800 cm. In poly bags of size 25 cm. wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure)including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 115 | Supply ,Stacking and planting of Saraca Indica (Sita Ashok ) of ht. 105 to 120 cm. In poly bags of size 25 cm. wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure)including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 116 | Supply ,Stacking and planting of Bassia Latifolia ( Mahua ) of ht. 90 to 105 cm. In poly bags of size 25 cm. wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure)including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 117 | Supply, Stacking and planting of Inga dulcis (Jungle Jalebi) of height 150-165 cm. in big poly bags ofsize 25 cm wth digging holes in ordinary soil and refilling the same with Excavated earth mixed with manure or sludge in the ratio of 2:1 (2 part Earth:1 Part stacked Manure)including all cost of material, Labour and T&P for completion of work or as per direction of officer in-charge . |
| 118 | Supply of services tractor with trolly including P.O.L. & Driver for maintenance work as per site requirement including all cost of material, Labour and T&P Etc. for completion of work |
| 119 | Supply of services tractor with water Tanker including P.O.L. & Driver for maintenance work 01 tractor trolly per day including all cost of material, Labour and T&P Etc. for completion of work. |
| 120 | Supply of services Beldar for maintenance work 01beldar per day including all cost of material, Labour and T&P Etc. for completion of work. |
| 121 | Supply of services Mali for maintenance work 01 Mali per day including all cost of material, Labour and T&P Etc. for completion of work. |
| 122 | Supply of services Hydraulic Excavator (3D) with driver and fuel for site clearance before work and after for maintenance work as per requirement of site including all cost of material, Labour and T&P Etc. for completion of work. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender