Tender For Tender For Repair Of Hpsebl Sub Division Office Building At Nurpur Under Electrical Division Hpsebl Nurpur (Sub Head Providing And Laying Vitrified Floor Tiles ,2Mm (Two Millimeters) Thick Pvc (Polyvinyl Chloride) Plain Paneling In Wall An
Tender Overview
Project Description
Tender for Tender For Repair Of Hpsebl Sub Division Office Building At Nurpur Under Electrical Division Hpsebl Nurpur (Sub Head Providing And Laying Vitrified Floor Tiles ,2Mm (Two Millimeters) Thick Pvc (Polyvinyl Chloride) Plain Paneling In Wall And Ceiling And Painting And Distempering Etc.)Ch. To Deposit Head
BOQ
| Sl. No. | Item Description |
| 1 | Repair of HPSEBL Sub Division Office Building at Nurpur |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size) |
| 3 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600 x 600 mm |
| 4 | Providing and Fixing 2mm (two millimeters) thick PVC (Polyvinyl chloride) plain paneling on ceiling with necessary screws complete or with approved adhesive complete as per netire satisfaction and directions of Engineer in charge complete including carriage of matreials with in all leads and lifts and other incidental. |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Sal wood |
| 6 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned selected class of sheesham wood |
| 7 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification.Two or more coats on old work |
| 8 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 9 | Prov. and fixing Electrical Installation work complete in all respect L/S Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart.Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender