Tender For Provn Of Patients Waiting Area At Psychiatry Wd And Provn Of Grease Trap For Cook House Messes, Patient Utility Center, Fam-I And Fam-Ii Ward Of Mh Jaipur At Jaipur Mil Stn
Tender Value
12.16 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
14 days left
EMD
24320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Patients Waiting Area At Psychiatry Wd And Provn Of Grease Trap For Cook House Messes, Patient Utility Center, Fam-I And Fam-Ii Ward Of Mh Jaipur At Jaipur Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ 82605/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: PROVN OF PATIENTS WAITING AREA AT PSYCHIATRY WD AND PROVN OF GREASE TRAP FOR COOK HOUSE MESSES, PATIENT UTILITY CENTER, FAM-I AND FAM-II WARD OF MH JAIPUR AT JAIPUR MIL STN CA NO: CWE/JPR- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line, cable trenches or for manholes etc not exceeding 10 sqm area on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | M&L for PCC 1:4:8 type D-2 (40 mm graded stone aggregate) as in fdn complete all as specified and directed. |
| 4 | M&L PCC 1:2:4 type B-2 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed. |
| 5 | M&L for RCC M-25 (25mm graded aggr) in foundations, including rafts,footings,foundation beams,plinth beams bases for columns etc basement slab under-reamed piles and mass concrete complete all as specified and directed. |
| 6 | M&L for RCC M-25 (20mm graded aggr) in columns, pillars, piers post and struts etc complete all as specified and directed. |
| 7 | M&L TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding , machinery, tools tackles and men materials complete all as specified and as directed by Engr-in-charge. |
| 8 | M&L TMT bars 6mm to 8mm dia bar , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia as in stirrups complete all as specified and as directed by Engr-in-charge. |
| 9 | Material and labour for brick work with sub class 'B' brick straight curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:6 for cracked wall of manholes,septic tank, soak pits etc complete all as specified and directed. |
| 10 | M & L for 40mm thick Damp proof course in PCC 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 11 | M&L for hard core (with broken stone/boulders) of gauge not exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick watered rolled and rammed to a true surfaces complete all as specified and directed. |
| 12 | M&L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE 410-W (Gde-E 250) quality A complete all as specified and directed. |
| 13 | M & L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment FE 410-W(Gde-E 250) quality A complete all as specified and directed. |
| 14 | M&L for two coat of synthetic enamel paint over a coat of red oxide primer surfaces of any description, over 10 cm in width or girth, not otherwise described complete all as specified and directed. |
| 15 | M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 16 | Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System with light Tegular 24 Edge Tiles of 16mm thickness and Prelude 24mm face exposed grid. The tiles shall have sand texture visual with acoustical punchers, Humidity Resistance (RH) of 99%, NRC 0.55 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 33db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84 with Board edge in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of up to 41%. The tile shall have certifications from GRIHA and GreenPro thereby confirming that it is an environment friendly product. SUSPENSION: The tile shall be laid on Prelude 38 with 24 mm wide T - section flanges colour global white (matching to tile colour) having roll formed double stroke rotary stitching on all T sections i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 15 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 18kg/m. The end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull-out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using suspension system (specifications above) at 1200mm maximum. The First/Last suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be carried out as per recommended procedure. SUSPENSION SYSTEM accessories supplied by consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners). |
| 17 | Removal of excavated material exc 250 m but not exc 500 m and deposited where directed at a level not exc 1.5 m high from starting point Complete all as specified and directed |
| 18 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm with soft/loose soil or hard/dense soil complete all as specified and directed |
| 19 | M&L for two coats of cement base paint over a coat of primer on un-plastered or new plastered surface of wall and including preparation of surface all as specified. |
| 20 | M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finish even and smooth with using extra cement all as specified. |
| 21 | M & L for PCC 1:4:8 type D-2 (40 mm graded stoneaggregate) 100mm thick & finishing the cement concrete surface without using extra cement finish even & fair all complete all as specified and directed. |
| 22 | M&L for PCC (1:2:4) type B-0, 25mm thick as in floors finished even and fair complete all as specified and directed. |
| 23 | Material & Labour for vitrified ceramic light shade/dark shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 0.36 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 24 | M & L for coloured Glazed ceramic tiles 300X450mmX7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the floor as on vertical surfaces laid over 10mm thick rendering in 1:4 complete all as specified and directed. |
| 25 | M&L for rendering 15 mm thick in CM 1:6 on brick work or concrete surface face, finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | M&L Rendering 15 mm thick on brick/ concrete surfaces in CM (1:4) using water proofing compound mixing with cement as per manufacturer instruction and finish the surface even and smooth without using extra cement complete all as specified and directed. |
| 27 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of chalk whiting and one coat wall putty complete all as specified and directed. |
| 28 | M&L for form work to sides of the columns square,rectangular or polygonal for the fair finished surfaces complete all as specified and directed. |
| 29 | Supply only water proofing compound complete all as specified and directed. |
| 30 | S&F anodized aluminium anodized brown/white colour door with frame made of anodized aluminum frame size 101x44x2mm thick and anodized aluminum shutters having bottom rail of size 114x44x2mm ,top rail 83x44x2mm, middle rail 85x44x2mm with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos, brass lock 04 levers and key, glazing with 5mm thick tinted glass in upper panel and with 12mm thick pre laminated particle board in lower panel including rubber gasket, aluminum beading complete all as specified and directed. |
| 31 | S&F three track powder coated aluminum anodized sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including anodized aluminium grill 0.5mm dia and all necessary fittings complete all as specified and directed. |
| 32 | S & F 2mm thick stainless steel (SS-304) of size 5' x 2.5' x 3.5' with holding capacity 1000 ltr with grease holding of 330 ltr including basket type screen of SS-304 with installation complete all as specified and directed. |
| 33 | S & F 2mm thick stainless steel (SS-304) of size 5' x 2' x 3' with holding capacity 700 ltr with grease holding of 225 ltr including basket type screen of SS-304 with installation complete all as specified and directed. |
| 34 | M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No drawn through and including PVC caping casing with accessories in wall floor etc ISI mark including sunken type metal boxes covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly , including making good of disturbed surface of cement plaster, whitewash/ distempered match with original colour complete all as specified and directed by Engineer-in-charge for the followings:-(a) one light/ fan/Exhaust fan point controlled by one switch |
| 35 | Description all as per Item No 33.00 above but One 3 pin 5 amps socket outlet on independent board with other switches. |
| 36 | Description all as per Item No 33.00 above but for one 3 pin 5 amps socket outlet on the same board with other switches. |
| 37 | Description all as per Item No 33.00 above but 4 Sq mm copper conductor multistraned pvcinsulated and unsheathed cable for Independent one 3 pin 15 Amps socket outlet In and including S/C 4 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire. |
| 38 | S&F switch piano 5 amps flush type single pole one way complete all as specified and directed. |
| 39 | S&F switch piano 16 amps flush type single pole one way complete all as specified and directed. |
| 40 | S&F socket outlet flush type 3 pin 5 amps complete all as specified and directed. |
| 41 | S&F socket outlet 2 in 1, 3 pin ,5 and 15 amps flush type complete all as specified and directed. |
| 42 | Supply and fixing Stepped type electronic fan regulator flash type on the existing phenolic laminated sheet etc suitable for 240 volt complete all as specified and directed. |
| 43 | Supply and fixing ceiling rose polycarbonate ,isolated body 65 X 50 mm 2 to 3 terminal complete all as specified and directed. |
| 44 | Supply and fixing of LED batten (1.2m) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 1x 20 watt(including driver ) having colour temperature of 6500K CRI>80,THD<10% and PF > 0.95 complete all as specified and directed. |
| 45 | Supply and fixing LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 46 | Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 47 | S&F MCB 6 to 32 Amps SP ,240 V ,10 KA 'C' curve,IP 20 complete all as specified and directed. |
| 48 | S&F MCB 40 to 63 Amps SPN ,240 V C curve 10 KA,IP 20 complete all as specified and directed. |
| 49 | S&F MCB DB SPN 8 way 240 volt with double door, IP - 43 protection system with having 200 Amps 2 Nos bus bar for neutral bar and earth bus bar fixed/concealed in wall complete and making good disturbed surfaces of wall, floor etc including necessary connection lugging with copper lugs pin/ring type all as directed by Engineer-in-Charge. |
| 50 | M & L for Earthing complete with galvanized steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normalless'than 1.5 metres below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earth work in any type of soil PCC (1:3:6) type C1 in chamber, precast RCC 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than4.00 Kg/Square metre) with PCC frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm mmbore medium grade GI protection pipe, test point etc complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead. |
| 51 | Supply and Laying of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 4 Core laid in GI pipe complete all as specified and directed. |
| 52 | Material & labour for sand filling with screened and washed sand in trenches as cushioning for underground cable provided with one layer of 80 mm thickness before laying of cable and other layer of 150 mm thickness after laying of cable & punning down to 180 mm to provide a required cover complete all as specified and directed by the Engineer-in-Charge.Note:- Punned thickness only shall be measured and paid. |
| 53 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm confirming to IS -5820 complete all as specified and as directed. |
| 54 | S & F galvanized iron pipe 40mm dia Light grade with all fittings complete all as specified and directed by Engineer-in-charge. |
| 55 | Schedule of Credit Total in Figures 0.0 0.0 0.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender