Tender For Annual Rate Contract For Ensuring Functionality By Restoration And Development Of Existing Tube Well Work Of Phed & Jjy Tube Wells In Jen Section Osian Sub Dn Osian Under District Division Iii Jodhpur
Tender Value
70 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
8 days left
EMD
1.40 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Rate Contract For Ensuring Functionality By Restoration And Development Of Existing Tube Well Work Of Phed & Jjy Tube Wells In Jen Section Osian Sub Dn Osian Under District Division Iii Jodhpur
BOQ
| Sl. No. | Item Description |
| 1 | Revised PHED BSR 2023-24/2.7 Deepening of existing tube well by DTH system beyond existing depth up to 100 mtr. and above in all type of rocks including flushing of tube well and obtaining sand free water. Rates are exclusive of GST. |
| 2 | 2.7.1 Nominal bore 150 mm dia. |
| 3 | 2.7.2 Nominal bore 200 mm dia. |
| 4 | Revised PHED BSR 2023-24/2.10 Development of tube well having depth up to 250 mtr as per IS: 11189- 1985 and IS: 2800 (Part- I)- 1991 (both amended up to date) using suitable methods to give sand free water for required yield of the gravel packed tube well.Rate is exclusive of GST. |
| 5 | Revised PHED BSR 2023-24/2.14 Supply & Installation of single phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.Rates are exclusive of GST. |
| 6 | 2.14.1 Up to 2.0 KW |
| 7 | 2.14.2 Above 2.0 KW |
| 8 | Revised PHED BSR 2023-24/2.15 Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.Rates are exclusive of GST. |
| 9 | 2.15.1 Up to 5.5 KW (7.5 HP) & head up to 120 mtr. |
| 10 | 2.15.2 Up to 5.5 KW (7.5 HP) & head above 120 mtr. |
| 11 | 2.15.3 7.5 KW (10 HP) & head up to 120 mtr. |
| 12 | 2.15.4 7.5 KW (10 HP) & head above 120 mtr. |
| 13 | 2.15.5 9.3 KW (12.5 HP) & head up to 120 mtr. |
| 14 | 2.15.6 9.3 KW (12.5 HP) & head above 120 mtr. |
| 15 | 2.15.7 11 KW (15 HP) & head up to 120 mtr. |
| 16 | 2.15.8 11 KW (15 HP) & head above 120 mtr. |
| 17 | 2.15.9 13 KW (17.5 HP) & head up to 120 mtr. |
| 18 | 2.15.10 13 KW (17.5 HP) & head above 120 mtr. |
| 19 | 2.15.11 15 KW (20 HP) and above, head up to 120 mtr. |
| 20 | 2.15.12 15 KW (20 HP) and above, head above 120 mtr. |
| 21 | Revised PHED BSR 2023-24/2.19 Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. Rates are exclusive of GST. |
| 22 | 2.19.1 3 core 4.0 Sq.mm |
| 23 | 2.19.2 3 core 6.0 Sq.mm |
| 24 | 2.19.3 3 core 10.0 Sq.mm |
| 25 | 2.19.4 3 core 16.0 Sq.mm |
| 26 | Revised PHED BSR 2023-24/2.20 Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. Rates are exclusive of GST. |
| 27 | 2.20.1 10.0 Sq.mm, 4 core |
| 28 | 2.20.2 16.0 Sq.mm, 4 core |
| 29 | 2.20.3 25.0 Sq.mm, 3.5 core |
| 30 | 2.20.4 35.0 Sq.mm, 3.5 core |
| 31 | Revised PHED BSR 2023-24/2.21 Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. Rate is exclusive of GST. |
| 32 | Revised PHED BSR 2023-24/2.22 Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.Rate is exclusive of GST. |
| 33 | Revised PHED BSR 2023-24/2.23 Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2\\" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug.Rates are exclusive of GST. |
| 34 | 2.23.1 125 mm dia |
| 35 | 2.23.2 150 mm dia |
| 36 | 2.23.3 200 mm dia |
| 37 | 2.23.4 250 mm dia |
| 38 | Revised PHED BSR 2023-24/2.24 Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B\\" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect.Rates are exclusive of GST. |
| 39 | 2.24.1 32 mm dia |
| 40 | 2.24.2 50 mm dia |
| 41 | 2.24.3 65 mm dia |
| 42 | 2.24.4 80mm dia |
| 43 | Revised PHED BSR 2023-24/2.26 Providing, installing, testing and commissioning of double flanged bulk flow meter with removable mechanism, of class B conforming to ISO 4064/1 or amended up to date of approved make including cost of all material and labour as per specifications with GI Box (sheet 16 SWG) suitable with locking arrangement of following dia.Rates are exclusive of GST. |
| 44 | 2.26.1 50 mm dia |
| 45 | 2.26.2 65 mm dia |
| 46 | 2.26.3 80 mm dia |
| 47 | Revised PHED BSR 2023-24/2.27 Providing & Fixing pump safety cage as per specifications or as directed by Engineer in charge.Rate is exclusive of GST. |
| 48 | Revised PHED BSR 2023-24/2.30 Providing & Fixing of double flanged, CI body, ISI marked NRV of approved make of following sizesRates are exclusive of GST. |
| 49 | 2.30.1 65 mm dia |
| 50 | 2.30.2 80 mm dia |
| 51 | Revised PHED BSR 2023-24/2.31 Proving and Fixing 32 mm dia Full way valve or wheel valve as per IS:778 or amended up to date of approved make, on pump delivery pipe.Rate is exclusive of GST. |
| 52 | Revised PHED BSR 2023-24/2.32 Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per specification with safety cover.Rate is exclusive of GST. |
| 53 | Chief Engineer (Rural) PHED Jaipur RajKaj 22187982 DT 14.05.2026 SITC of Digital Type Single Phase DOL Starter Electrical Control Feeder Panel, 63A, suitable for operation of Single phase pump set on 215V AC supply, comprising input MCB (DP 63A.), GFU with auxiliary contact for earth fault protection, AC-3 duty PMC based DC contactors 50 Amp. 1P (DOL type), Microprocessor based Digital Motor Protection Unit with necessary protections, RTC timer, MCBs for power and control circuits, LED indications, Heavy duty terminal connectors, complete internal wiring with copper conductors (for control and power), capacitor bank and all necessary hardware. The panel shall be housed in outdoor type fabricated GI enclosure of 1.6 mm thickness, complete with all standard protections, indications and automation features required for safe, efficient and reliable operation of pump sets under varying field conditions, complete in all respects as per specification and direction of Engineer-in-Charge. |
| 54 | 1.1 Upto 5 HP (Single Phase) |
| 55 | Chief Engineer (Rural) PHED Jaipur RajKaj 22187982 DT 14.05.2026SITC of Digital Type DOL Starter Electrical Control Feeder Panel, 40A, suitable for operation of 3-phase pump set on 415V AC supply, comprising input MCB (40Amp. FP), GFU with auxiliary contact for earth fault protection, 32Amp. AC-3 duty PMC based DC contactors (for DOL and APSC type), Microprocessor based Digital Motor Protection Unit with necessary protections, RTC timer, MCBs for power and control circuits, LED indications, Heavy Duty terminal connectors, complete internal wiring with copper conductors (for control and power), capacitor bank of 3 kVAR, and all necessary hardware. The panel shall be housed in outdoor type fabricated GI enclosure of 1.6 mm thickness, complete with all standard protections, indications and automation features required for safe, efficient and reliable operation of pump sets under varying field conditions, complete in all respects as per specification and direction of Engineer-in-Charge. |
| 56 | 2.1 Up to 5 HP (DOL type) |
| 57 | Chief Engineer (Rural) PHED Jaipur RajKaj 22187982 DT 14.05.2026 SITC of Digital Type Star Delta Starter Electrical Control Feeder Panel, 100A, suitable for operation of 3-phase pump set on 415V AC supply, comprising input 100Amp. MCCB (TP), GFU with auxiliary contact for earth fault protection, 32Amp. AC-3 duty PMC based DC contactors (For Star and Main), 40Amp. 1 Pole Contactor for APSC, 22Amp. Contactor for Delta, Microprocessor based Digital Motor Protection Unit with necessary protections, RTC timer, MCBs for power and control circuits, LED indications, Heavy duty terminal connectors, complete internal wiring with copper conductors (for control and power), capacitor bank of 3 kVAR, and all necessary hardware. The panel shall be housed in outdoor type fabricated GI enclosure of 1.6 mm thickness, complete with all standard protections, indications and automation features required for safe, efficient and reliable operation of pump sets under varying field conditions, complete in all respects as per specification and direction of Engineer-in-Charge. |
| 58 | 3.1 Above 5 HP and up to 10 HP (Star Delta type) |
| 59 | Chief Engineer (Rural) PHED Jaipur RajKaj 22187982 DT 14.05.2026 SITC of Digital Type Star Delta Starter Electrical Control Feeder Panel, 100A, suitable for operation of 3-phase pump set on 415V AC supply, comprising input 100Amp. MCCB (TP), GFU with auxiliary contact for earth fault protection, 35Amp. AC-3 duty PMC based DC contactors (For Star and Main), 45Amp. 1 Pole Contactor for APSC, 25Amp. Contactor for Delta, Microprocessor based Digital Motor Protection Unit with necessary protections, RTC timer, MCBs for power and control circuits, LED indications, Heavy duty terminal connectors, complete internal wiring with copper conductors (for control and power), capacitor bank of 5 kVAR, and all necessary hardware. The panel shall be housed in outdoor type fabricated GI enclosure of 1.6 mm thickness, complete with all standard protections, indications and automation features required for safe, efficient and reliable operation of pump sets under varying field conditions, complete in all respects as per specification and direction of Engineer-in-Charge. |
| 60 | 4.1 Above 10 HP and up to 15 HP (Star Delta type) |
| 61 | Chief Engineer (Rural) PHED Jaipur RajKaj 22187982 DT 14.05.2026 SITC of Digital Type Star Delta Starter Electrical Control Feeder Panel, 100A, suitable for operation of 3-phase pump set on 415V AC supply, comprising input 100Amp. MCCB (TP), GFU with auxiliary contact for earth fault protection, 40Amp. AC-3 duty PMC based DC contactors (For Star and Main), 45Amp. 1 Pole Contactor for APSC, 32Amp. Contactor for Delta, Microprocessor based Digital Motor Protection Unit with necessary protections, RTC timer, MCBs for power and control circuits, LED indications, Heavy duty terminal connectors, complete internal wiring with copper conductors (for control and power), capacitor bank of 7 kVAR, and all necessary hardware. The panel shall be housed in outdoor type fabricated GI enclosure of 1.6 mm thickness, complete with all standard protections, indications and automation features required for safe, efficient and reliable operation of pump sets under varying field conditions, complete in all respects as per specification and direction of Engineer-in-Charge. |
| 62 | 5.1 Above 15 HP and up to 20 HP (Star Delta type) |
| 63 | Chief Engineer (Rural) PHED Jaipur RajKaj 22187982 DT 14.05.2026 SITC of Digital Type Star Delta Starter Electrical Control Feeder Panel, 125A, suitable for operation of 3-phase pump set on 415V AC supply, comprising input 125Amp. MCCB (TP), GFU with auxiliary contact for earth fault protection, 45 Amp. AC-3 duty PMC based DC contactors (For Star and Main), 50 Amp. 1 Pole Contactor for APSC, 40 Amp. Contactor for Delta, Microprocessor based Digital Motor Protection Unit with necessary protections, RTC timer, MCBs for power and control circuits, LED indications, Heavy duty terminal connectors, complete internal wiring with copper conductors (for control and power), capacitor bank of 8.3 kVAR, and all necessary hardware. The panel shall be housed in outdoor type fabricated GI enclosure of 1.6 mm thickness, complete with all standard protections, indications and automation features required for safe, efficient and reliable operation of pump sets under varying field conditions, complete in all respects as per specification and direction of Engineer-in-Charge. |
| 64 | 6.1 Above 20 HP and up to 25 HP (Star Delta type) |
| 65 | Chief Engineer (Rural) PHED Jaipur RajKaj 22187982 DT 14.05.2026 SITC of Digital Type Star Delta Starter Electrical Control Feeder Panel, 125A, suitable for operation of 3-phase pump set on 415V AC supply, comprising input 125Amp. MCCB (TP), GFU with auxiliary contact for earth fault protection, 63 Amp. AC-3 duty PMC based DC contactors (For Star and Main), 80 Amp. 1 Pole Contactor for APSC, 50 Amp. Contactor for Delta, Microprocessor based Digital Motor Protection Unit with necessary protections, RTC timer, MCBs for power and control circuits, LED indications, Heavy duty terminal connectors, complete internal wiring with copper conductors (for control and power), capacitor bank of 12.5 kVAR, and all necessary hardware. The panel shall be housed in outdoor type fabricated GI enclosure of 1.6 mm thickness, complete with all standard protections, indications and automation features required for safe, efficient and reliable operation of pump sets under varying field conditions, complete in all respects as per specification and direction of Engineer-in-Charge. |
| 66 | 7.1 Above 25 HP and up to 30 HP (Star Delta type) |
| 67 | 2.7 - Deepening of existing tube well by DTH system beyond existing depth up to 100 mtr. and above in all type of rocks including flushing of tube well and obtaining sand free water. |
| 68 | 2.7.2 - Nominal bore 200 mm dia. |
| 69 | PHED BSR 2023-24/2.10 - Development of tube well having depth up to 250 mtr as per IS: 11189- 1985 and IS: 2800 (Part- I)- 1991 (both amended up to date) using suitable methods to give sand free water for required yield of the gravel packed tube well. |
| 70 | PHED BSR 2023-24/2.15 - Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. |
| 71 | 2.15.1 - Up to 5.5 KW (7.5 HP) & head up to 120 mtr. |
| 72 | 2.15.2 - Up to 5.5 KW (7.5 HP) & head above 120 mtr. |
| 73 | 2.15.3 - 7.5 KW (10 HP) & head up to 120 mtr. |
| 74 | 2.15.4 - 7.5 KW (10 HP) & head above 120 mtr. |
| 75 | 2.15.5 - 9.3 KW (12.5 HP) & head up to 120 mtr. |
| 76 | 2.15.6 - 9.3 KW (12.5 HP) & head above 120 mtr. |
| 77 | 2.15.7 - 11 KW (15 HP) & head up to 120 mtr. |
| 78 | 2.15.8 - 11 KW (15 HP) & head above 120 mtr. |
| 79 | 2.15.9 - 13 KW (17.5 HP) & head up to 120 mtr. |
| 80 | 2.15.10 - 13 KW (17.5 HP) & head above 120 mtr. |
| 81 | 2.15.11 - 15 KW (20 HP) and above, head up to 120 mtr. |
| 82 | 2.15.12 - 15 KW (20 HP) and above, head above 120 mtr. |
| 83 | PHED BSR 2023-24/2.19 - Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. |
| 84 | 2.19.1 - 3 core 4.0 Sq.mm |
| 85 | 2.19.2 - 3 core 6.0 Sq.mm |
| 86 | 2.19.3 - 3 core 10.0 Sq.mm |
| 87 | 2.19.4 - 3 core 16.0 Sq.mm |
| 88 | PHED BSR 2023-24/2.20 - Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. |
| 89 | 2.20.1 - 10.0 Sq.mm, 4 core |
| 90 | 2.20.2 - 16.0 Sq.mm, 4 core |
| 91 | 2.20.3 - 25.0 Sq.mm, 3.5 core |
| 92 | 2.20.4 - 35.0 Sq.mm, 3.5 core |
| 93 | PHED BSR 2023-24/2.21 - Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 94 | PHED BSR 2023-24/2.22 - Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. |
| 95 | PHED BSR 2023-24/2.23 - Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2\\" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. |
| 96 | 2.23.1 - 125 mm dia |
| 97 | 2.23.2 - 150 mm dia |
| 98 | 2.23.3 - 200 mm dia |
| 99 | 2.23.4 - 250 mm dia |
| 100 | PHED BSR 2023-24/2.24 - Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B\\" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect. |
| 101 | 2.24.1 - 32 mm dia |
| 102 | 2.24.2 - 50 mm dia |
| 103 | 2.24.3 - 65 mm dia |
| 104 | 2.24.4 - 80mm dia |
| 105 | PHED BSR 2023-24/2.26 - Providing, installing, testing and commissioning of double flanged bulk flow meter with removable mechanism, of class B conforming to ISO 4064/1 or amended up to date of approved make including cost of all material and labour as per specifications with GI Box (sheet 16 SWG) suitable with locking arrangement of following dia. |
| 106 | 2.26.1 - 50 mm dia |
| 107 | 2.26.2 - 65 mm dia |
| 108 | 2.26.3 - 80 mm dia |
| 109 | PHED BSR 2023-24/2.27 - Providing & Fixing pump safety cage as per specifications or as directed by Engineer in charge. |
| 110 | PHED BSR 2023-24/2.30- Providing & Fixing of double flanged, CI body, ISI marked NRV of approved make of following sizes |
| 111 | 2.30.1 - 65 mm dia |
| 112 | 2.30.2 - 80 mm dia |
| 113 | PHED BSR 2023-24/2.31 - Proving and Fixing 32 mm dia Full way valve or wheel valve as per IS:778 or amended up to date of approved make, on pump delivery pipe. |
| 114 | PHED BSR 2023-24/2.32 - Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per specification with safety cover. |
| 115 | RUDIP BSR 2022 - 34.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : |
| 116 | 34.12.1 15 mm dia. nominal bore |
| 117 | 34.12.2 20 mm dia. nominal bore |
| 118 | 34.12.3 25 mm dia. nominal bore |
| 119 | 34.12.4 32 mm dia. nominal bore |
| 120 | 34.12.5 40 mm dia. nominal bore |
| 121 | 34.12.6 50 mm dia. nominal bore |
| 122 | 34.12.7 65 mm dia. nominal bore |
| 123 | 34.12.8 80 mm dia. nominal bore |
| 124 | PHED BSR 2023-24/6.1 - Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work.6.1.1 - Manually Operated CI Sluice valve of Class PN-1.0 |
| 125 | 6.1.1.1 - 80 mm HW |
| 126 | 6.1.1.2 - 100 mm HW |
| 127 | 6.1.1.3 - 125 mm HW |
| 128 | PHED BSR 2023-24/2.18 - Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. |
| 129 | 2.18.1 - Above 5 HP and up to 10 HP |
| 130 | 2.18.2 - Above 10 HP and up to 15 HP |
| 131 | 2.18.3 - Above 15 HP and up to 20 HP |
| 132 | 2.18.4 - Above 20 HP and up to 30 HP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender