Defence Statutory Bodies & Commissions/Committees Closing in 3 days TDR #58384380

Tender For Special Repair To Ge (North) Mes Installation (E/M & B/R) Bldg No P-47/2, P-27, P-28, P-29 (Power Complex, Pump Room, Gen Room, Store) At Hirankudna And Provn Of Foot Path &Hard Standing With Interlocking Paver Block At Bldg. No P-28 Of St

Issued by Statutory Bodies & Commissions/Committees · New Delhi, Delhi
Tender Value
43.72 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
87440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair To Ge (North) Mes Installation (E/M & B/R) Bldg No P-47/2, P-27, P-28, P-29 (Power Complex, Pump Room, Gen Room, Store) At Hirankudna And Provn Of Foot Path &Hard Standing With Interlocking Paver Block At Bldg. No P-28 Of Stl 7/8 Asc Timarpur Under Ge (North) Delhi Cantt-10.

BOQ

Name of Work:- SPECIAL REPAIR TO GE (NORTH) MES INSTALLATION (E/M & B/R) BLDG NO P-47/2, P-27, P-28, P-29 (POWER COMPLEX, PUMP ROOM, GEN ROOM, STORE) AT HIRANKUDNA AND PROVN OF FOOT PATH &HARD STANDING WITH INTERLOCKING PAVER BLOCK AT BLDG. NO P-28 OF STL 7/8 ASC TIMARPUR UNDER GE (NORTH) DELHI CANTT-10.
Sl. No. Item Description
1Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and removing from site all as directed.
2Taking down chowkhats or frames with shutters but exc 1.5 sqm but n.exc 4sqm each complete all as specified and directed .
3S&F Framed work such as grills, gratings, chowkhats of angle/channel section etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete, all as specified and directed
4S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately).
5S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete.all as specified and directed.
6S&F 100 mm size Stainless Steel butt hinges and fixed complete all as specified and directed
7S&F Stainless Steel barrel tower bolt 150mm long extruded section all as specified.
8S&F 150mm size Stainless Steel handles fabricated type complete all as specified.
9Supply and fixing factory made uPVC white colour Three track three panels sliding window/openable type with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh includes in the coated rate)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
10Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and as directed.
11M&L for brick work with Fly ash bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.
12Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.
13Material and labour for 15mm thick plaster in cement mortar with Nano wall filler 1% of cement weight : cement 1: sand 4 in two layers, i.e as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified. Note :- Nano wall filler shall be measured and paid separately.
14Material and labour for rendering 10mm thick in cement mortar with Nano wall filler 1% of cement weight : cement 1: sand 6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified.Note :- Nano wall filler shall be measured and paid separately.
15Material and labour for preparation of old/new plastered surfaces and applying Nanotechnology based Nano Putty is white cement based product with dispersible polymer and functional additives for application on interior rough plasters to give a smooth surface and will form base for paint finish for interiors of the building, applied in 02 coats of total thickness 1.5mm @ 1.2 kgs/sqm complete all as specified.
16Material and labour for preparation of old/new plastered surfaces and applying two caots Nanotechnology based Nano Primer is white cement based product with dispersible polymer and functional additives for application on interior rough plasters to give a smooth surface and will form base for paint finish for interiors of the building, acomplete all as specified.
17Material and Labour for 02 coats of Nanotechnology based Acrylic Regular Distemper, water based gives walls a smooth and matt finish and applied on prepared surface of wall & ceiling over a coat of approved nano primer @ 6.50 sqm/ltr using AUTO-ROLLER and AIR-LESS PAINT SPRAYER complete all as specified and dircted by Engr-in-Charge.
18Supply only Nanotechnology based Elastomeric Hydrophobic Powder/admixture (EHP) powder for cement plaster and concrete.
19Material and labour for 5 mm thick plastering in CM With Nano wall filler 1% of cement weight : Cement 1: Sand 3 on concrete surfaces as in sides of column, lintel, beam, chajja, Ceiling facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed Note :- Nano wall filler shall be measured and paid separately.
20M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed.
21Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for (Roof, Chajjas, Beams Etc) complete all as specified and directed.
22M&L for reinforced cement concrete (nominal mix) type B 0 1:2:4 (12.50mm graded crushed stone aggregate) as in Chajjas, slab and the like complete all as specified and directed.
23Use & Waste of formwork to Chajjas, slab ,chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and directed.
24S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. Please Enable Macros to View BoQ information
25S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58384380
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 43.72 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair To Ge (North) Mes Installation (E/M & B/R) Bldg No P-47/2, P-27, P-28, P-29 (Power Complex, Pump Room, Gen Room, Store) At Hirankudna And Provn Of Foot Path &Hard Standing With Interlocking Paver Block At Bldg. No P-28 Of Stl 7/8 Asc Timarpur Under Ge (North) Delhi Cantt-10.
Basic Detail
Tender No GE/NORTH-174/2026-27
Bidding Type Tender
Location
City New Delhi
State Delhi
Key Dates
Publish Date 05 Nov 2026
Submission Date 25 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 43.72 Lakhs
Tender Fee 500
EMD 87440
Exemption Available
Document List
BOQ_894426.xls
d92b062f-ab4d-4021-abd6-ff52a0aa7870.html
Gen174.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_894426.xls

html

d92b062f-ab4d-4021-abd6-ff52a0aa7870.html

pdf

Gen174.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender