Defence Statutory Bodies & Commissions/Committees Closing in 3 days TDR #58384378

Tender For Repair Roof Leakage/Seepage, Roof Sheet, Rolling Shtter, Sliding Door And Other Connected B/R Item Under The Aor Of Age B/R-I Of Ge (North) Delhi Cantt-10.

Issued by Statutory Bodies & Commissions/Committees · New Delhi, Delhi
Tender Value
49 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair Roof Leakage/Seepage, Roof Sheet, Rolling Shtter, Sliding Door And Other Connected B/R Item Under The Aor Of Age B/R-I Of Ge (North) Delhi Cantt-10.

BOQ

Name of Work:- REPAIR ROOF LEAKAGE/SEEPAGE, ROOF SHEET, ROLLING SHTTER, SLIDING DOOR AND OTHER CONNECTED B/R ITEM UNDER THE AOR OF AGE B/R-I OF GE (NORTH) DELHI CANTT-10.
Sl. No. Item Description
1S&F Rough cast,wired Fibre glass sheet exc 6mm thick but n.exc 10 mm thick fixed with flat iron and nut bolts in squre/rectangle & as required exc 0.75sqm but n.exc 1.00sqm in each pane wixed with necessary securing arragement as previus at height upto 15m incl Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as speccified and direccted.
2S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete(steel or wooden metal) all as specified.
3Dismantling wrought iron or mild steel work of any description not otherwise provided.
4Dismantling timber scantlings 40 sq. cm and over in section, in frame work at any position complete all as specified and directed.
5Ditto- in fillets, rails, posts, rafters, purlins as in framed work etc. Under 40 sq cm in section.
6S&F Structural steel work for rolled sections as in main and cross beams,hips,jacks, rafters, purlins,runnings , rails and guides for sliding doors fixed with angles, cleats or other conneccting plates grade FE-410-W at working height 15m incl application of two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, exc 10 Cms in width or girth, including preparation of surfaces up to ht of 15.00 m, complete all as specified and directed.
7Dismantling of AC sheet (corrugated/semi corrugated etc) in roof or wall of any description including false ceiling of any type below roof sheet etc at height upto 15 metres complete all as specified and directed.
8Dismantling of Plain or corrugated steel/ fibre sheeting of any guage as in roof covering including ridges/gutters etc of any description straight or curved at height upto 15 mtr complete all as specified and directed.
9Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store .
10S&F prepainted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thk of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as in roof up to 15 m ht complete all as spd .
11S&F Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc up to 15 m ht, complete all as spd .
12S&F 0.50mm plain, Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet galvanised,mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 and welded or soldered joints are provided as requried up to 15 m ht, complete all as specified and directed.
13S&F 2mm thick PGI sheet having 275gm of zink coating per sqm both sides in valley gutter, dripper,or as rain water pipe, straight flashing with 100mm overlap made to required shape & size incl welding or revetting and fixed in position and working height upto 15m complete all as specified and directed.
14Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4) incl Dismantling of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles up to 15 mtr height complete all as specified.
15M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on new brick work or concrete surface of wall (internal surfaces) finished even and smooth up to 15 mtr height incl two coat of Oil Bound Distemper over 1mm thick putty wall care putty complete all as specified and as directed.
16M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on new brick work or concrete surface of wall (Exteernal surfaces) finished even and smooth up to 15 mtr height incl application of two coats of cement base paint over a coat of primer,complete all as specified and as directed
17M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (internal surfaces) finished even and smooth including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots up to 15 mtr height incl two coat of Oil Bound Distemper over 1 mm thick putty wall care putty complete all as specified and as directed.
18M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (Exteernal surfaces) finished even and smooth including raking out joints, hacking for key, scrubbing down with water etc, including cutting of trees, shrubs or any type of vegitation upto and including roots up to 15 mtr height incl application of two coats of cement base paint over a coat of primer,complete all as specified and as directed
19M&L 5mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on ceilling surfaces finished even and smooth including Taking down cement or cement lime plaster, on ceiling sufface including raking out joints, hacking for key, scrubbing down with water etc incl application of three coats of white wash complete all as specified and directed
20M&L providing 1:2:4 type B-0 (12.5 mm graded aggregates) cement concrete in roof kerbs or mud stops, rounded or chamfered on edges and other similar works as coping, roof padding etc incl demolition comlete all as specified and as directed.
21S&F with complete installation of wind operator turbo air ventilator of size 600mm dia made of stain less steel sheet including dual ball bearing fixed over assembly made of polycarbonate transparent sheet of size 5.5 x 3.5 feet on roof of steel structure shed working height up to 15 meter complete all as specified and directed.
22S&F for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick or 600x600x4 mm thick E bord of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light incl dismantling of old false ceiling of nay discription at as specified and directed.
23S&F powder coated aluminium frame partition with frame of standard anodised aluminum section, of size 101.60 mm X 44.45mmX2mm,in vertical and horizonal members and glazed with5mm thick tinted prelaminated partical board interior grade both side laminated or plain glass including joining cleats, glazing pins, rubber packing including dismantling of old partition complete all as specified and directed.
24Removing foriegen materials i.e silt, sludge, soil from Valley Gutters, in any pipe of any dia in any position without disturbing the structure of valley gutter & sheets, working height upto15m and thrown away from MOD land complete all as directed
25M&L for disconnecting existing PVC tanks, of capacity exc 250 Ltrs and n.exc 500 Ltrs and setting aside (or lowering if required) for roof treatment, etc, and hoisting if required reconnecting and re-fixing in position.
26M&L for disconnecting existing PVC tanks, of capacity exc 500 Ltrs and n.exc 1000 Ltrs and setting aside (or lowering if required) for roof treatment, etc, and hoisting if required reconnecting and re-fixing in position.
27S&F Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete.
28S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete.
29Refixing only old 20 mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required including taking up or down steel tubing and connections complete.
30S & F in repair 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete.
31S & F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210gms), complete.
32Removing of existing water proofing membrane, damage plaster, vegitation/plants, PCC any thickness, Tar-felt, loose particles and all forgin materials over the roof and shifting the debris from site to out-side area as directed by authority on factory garbage area.
33Taking down brick tiles, terracing tiles, single layer from roof laid, bedded and pointed in any mortar all as specified & directed.
34Demolition of cement concrete, mud phuska of any description and in any position not specifically provided for complete all as specified and as directed.
35M&L PCC 1:2:4 type B-0 padding on roof as in leveling to making slope, surface finished even and smooth without using extra cement.
36M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of approved make @ 0.200 ltr in 50 Kg of cement
37APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning existing surface properly.(b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface.(c) Laying not less than 3mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap over a layer of hot bitumen 85/25 grade @ 1.2 Kg/Sqm overbituminous primer before Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.
38S & F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner.
39APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) removing and Cleaning existing damaged APP membrane from roof surface and clean all cement mortar and vegitation, plants with roots properly.(b) Applying oil bound bitumen primer @ 0.40 Kg/Sqm over 10mm thick plastering in CM (1:4) with WPC @ 3% by weight of the cement.(c) Apply a coat of hot bitumen 85/25 grade @ 1.60 kg/sqm.(c) Apply standard quality APP modified polymeric memrane minimum 3mm thick over the bitumen coat joints to be touched hot and width of overlaps shall e 75 mm length wise and 100mm widthwise of the membrane.(d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.(e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58384378
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 49 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair Roof Leakage/Seepage, Roof Sheet, Rolling Shtter, Sliding Door And Other Connected B/R Item Under The Aor Of Age B/R-I Of Ge (North) Delhi Cantt-10.
Basic Detail
Tender No GE/NORTH-173/2026-27
Bidding Type Tender
Location
City New Delhi
State Delhi
Key Dates
Publish Date 05 Nov 2026
Submission Date 25 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 49 Lakhs
Tender Fee 500
EMD 98000
Exemption Available
Document List
a84ae4e8-f4c3-4675-9e49-9d741ddab2f4.html
BOQ_894422.xls
Gen173.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

a84ae4e8-f4c3-4675-9e49-9d741ddab2f4.html

xls

BOQ_894422.xls

pdf

Gen173.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender