Tender For Application Of Smart Periodical And Connected B/R Item In Md/Otm Accn Under Age B/R-Iof Ge (North) Delhi Cantt-10
Tender Value
46 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Application Of Smart Periodical And Connected B/R Item In Md/Otm Accn Under Age B/R-Iof Ge (North) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | M&L for applying two coats of Oil Bound Distemper on old plastered/unplastered surface of wall using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower .Note - Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc. by skilled labour step 1) Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 2 | M&L for two coats of cement base paint on old plastered/unplastered surface of wall using auto-roller and airless paint sprayer over one coat of acrylic water based exterior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of asian Paints Trucare graco or equivalent having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent quotes incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 3 | M&L for applying two coats of Oil Bound Distemper on new plastered/unplastered surface of wall using Airless spray technology withmax working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paintusage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower .Note - Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over M&L waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc. by skilled labour step 1) Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface complete all as specifiec and as directed. |
| 4 | M&L for two coats of cement base paint on new plastered/old plastered surfaceof wall using auto-roller and airless paint sprayer over one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of asian Paints Trucare graco or equivalent having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent quotes incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 5 | M&L for preparation of old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 6 | M&L for preparation of new plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm using auto-roller and airless paint sprayer complete all as specifiec and as directed. |
| 7 | M&L for applying two coats of Oil Bound Distemper on old plastered/unplastered surface of Ceiling using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paintusage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower .Note - Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer over waterproof cement based putty @ 1Kg(undiluted) per sq mtr of average thickness 1mm of Asian Paints or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete all Sanding of the putty surface with Asian Paints Tru Care Wall Sander :-01H-01 or equivalent (having mechanical vaccume mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7\\"/9\\" to make the surface free from dust etc. by skilled labour step 1) Mix the putty powder by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer with min 1400 W power having mixer rod of industrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute). Step 2- Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Grace Spray Machine (Model:; EH 230 DI) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a miximum pressure 230 bar having maximum tip size 0.041\\" Step 3) Allow 6-8 hrs time to dry the putty surface incl Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7\\" to 9\\" to make the surface free from dust, loose paint etc. by skilled labour complete all as specifiec and as directed. |
| 8 | M&L for preparation of old plastered surfaces of wall and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm using auto-roller and airless paint sprayer complete all as specifiec and as directed. |
| 9 | M&L for prepration of old decorated wall surfaces including cornices brooming down or steel wire brushing; scrapping down smoke soot moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of cement base paint of approved shade complete all as specified and directed. |
| 10 | M&L for prepration of old treated wall surfaces and applying one coats of Oil Bound Distemper ,complete all as specified and dircted by Engr-in-Charge. |
| 11 | M&L for preparing old plastered surfaces of ceilling and applying one of coat of oil bound distemper complete all as specified and directed. |
| 12 | M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash on ceilling surfaces complete all as specified and directed. |
| 13 | M&L for one coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 14 | M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. |
| 15 | M&L applying two coats of Plastic emulsion paint over a coat of primer on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including complete removal of existing treatment of old surface complete all as specified and directed by engr-in-charge. |
| 16 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane incl Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete(steel or wooden metal) all as specified. |
| 17 | S&F 3mm thick obscured or frosted, on one side and glazing with oil putty complete in squares not exc 0.50 Sqm each pane incl Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete(steel or wooden metal) all as specified. |
| 18 | M&L for writing letters or figures, dash arrow circule etc (Block. Roman, Italic or Indian) n exc. 30 cm height on existing surface of wall complete all as specified and directed. |
| 19 | M&L for clean the wall, roof, chajja and beam surfaces by removal of groth plant and injecting with chemical glyphosphate solution (4% concentration) @ 20ml or till refuse by cutting or injection in stem of plants and roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate (4% concentration) diluted with 1ltr of water.The size of block considred as whole bldg. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base paint or acrylic paint with necessary scaffolding all as specified and directed. |
| 20 | M&L for exterior wall tiles 8 to 10mm thick & not exc 0.18 sqm in size , colour & shade of tiles as approved by Engr-in-charge,set and jointed in neat cement slurry and pointed in coloured cement to match the surface over 10 mm thk backing coat in CM 1:4 including taking down old tiles complete all as specified and directed by Engr-in-Charge. |
| 21 | Providing, fabricating, supplying and fixing of decorative name plate at main entrance gate, comprising 3–5 mm thick Stainless Steel (Grade 304) / Mild Steel base plate of approved size (approx. 300 mm × 450 mm), with brushed/mirror/matte powder-coated finish, including anti-rust treatment and exterior-grade protective coating. The name plate shall be fitted with raised 3D golden letters (25–75 mm height) made of SS with PVD gold coating / brass / metallic finish acrylic, fixed with concealed studs and epoxy adhesive to achieve 10–20 mm projection from base plate. The work shall include laser/CNC cutting (if required), decorative border design, all hardware, stainless steel fasteners, anchor bolts, alignment, complete installation at site, and making good of surrounding surfaces. All materials shall be weather-resistant, UV-stable, and suitable for external exposure complete as per instructions of Engineer-in-Charge. |
| 22 | M&L for clean the wall, roof, chajja and beam surfaces by removal of groth plant and injecting with chemical glyphosphate solution (4% concentration) @ 20ml or till refuse by cutting or injection in stem of plants and roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate (4% concentration) diluted with 1ltr of water.The size of block considred as whole bldg. All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base paint or acrylic paint with necessary scaffolding all as specified and directed. |
| 23 | M&L 15mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (external surfaces) finished even and smooth including taking down cement plaster from wall all as specified and directed. |
| 24 | M&L 10mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on brick work on concrete surface of wall (internal surfaces) finished even and smooth including takingdown existing cement plaster from wall all as specified and directed. |
| 25 | M&L 5mm thick ready mix plaster (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP) on ceilling surfaces finished even and smooth including taking down cement plaster from ceilling all as specified and directed. |
| 26 | S & F 5mm thick Printed PVC sheet used instead of plain colour PVC sheet plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining and ceiling and Solid PVC Partitions inclusive of Solvent Cement at site complete all as speicified and directed by Engr-in-charge. |
| 27 | Providing and fixing 4 mm thick aluminium composite panel exterior grade (0.5mm PVDF coated Aluminium skin on top & bottom plus 5mm thick polyethylene core) on/all-round RCC/Brick column/wall/Fascia's/M.S. section/Aluminium section structure/dead walls/under side sky light upto all heighs in required colour/pattern & panel size as (Area of panel shall not more than 0.60Sqm per drawing fixed on aluminium extruded standard tubular section of size 38x25x1.6 mm of approved make (Jindal/Hindalco/Indalco) conforming to IS;733 and IS; 1285, fixed at 600 m center to center with rawl plugs and screws or with fixing clips or with expansion hold fasteners Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle CP brass/stainless steel screws, with 12mm (wide) x 20mm (deep) groove in joints or lpanels including filling the joints with weather silicon sealant of Dow coming 789 or equivalent of approved colour inacp ACP, weather sealant structural sealant/adhesive tape, masking tap,primer/Gasket/Foam/Scaffolding/ cluding 10mm dia backer rod, The rate shall include cost of ACP Panel, subframe of aluminium section for fixing of ACP, weather sealant structural sealant/adhesive tape, masking tape primer/Gasket/Foam/Scaffolding/ Aluminium cleats with screws complete including making openings as required at site like electical fittings, recess for pipe etc, all anecessary tools and plants, scaffolding and as per manufacture technical specifications, including dismantling complete and as per the direction of the Engr-in-Charge (Surface area of aluminium composite panel shall be measured for payment. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender