Defence Statutory Bodies & Commissions/Committees Closing in 3 days TDR #58384363

Tender For Special Repairs To Perimeter Chain Link Fencing Of Suply Point Asc And Provn Of One Toilet Block Near Trg Complex At Mil Stn Dhrangadhra

Issued by Statutory Bodies & Commissions/Committees · Surendranagar, Gujarat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
75000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Surendranagar → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repairs To Perimeter Chain Link Fencing Of Suply Point Asc And Provn Of One Toilet Block Near Trg Complex At Mil Stn Dhrangadhra

BOQ

Name of Work:- SPECIAL REPAIRS TO PERIMETER CHAIN LINK FENCING OF SUPLY POINT ASC AND PROVN OF ONE TOILET BLOCK NEAR TRG COMPLEX AT MIL STN DHRANGADHRA
Sl. No. Item Description
1Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.
2Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in soft soil complete all as specified and directed.
3Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.
4Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil) complete all as specified and as directed.
5Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified and as directed.
6Sand cushioning to under ground cable with dry sand locally available 8 cm thick before laying the cable and 15 cm above the cable, stretching and testing of cable complete all as specified & directed by Engineer-in-Charge.
7Removing excavated material (disintegrated rocks) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.
8Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soft soil complete all as specified and as directed.
9Excavating in post holes (or similar holes) in soft/d each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
10Supply and Fixing Angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets including all necessary drilling, bolting or rivetting etc and similar work confirming to Fe 290 Gd E-165. complete all as specified and as directed.
11Dismantling posts or struts (wood,steel or RCC)any section,including taking out embedded portion and making good disturbed ground post embedded in concrete ,brick work ,etc. complete all as specified and as directed.
12M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
13M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.
14M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work and demolition of existing cement work complete all as specified and as directed.
15M&L RCC (Noninal Mix) Type B0 1:2:4 (12.5 mm graded aggregate ) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.
16M&L RCC (Noninal Mix) Type B0 1:2:4 (12.5 mm graded aggregate )as in columns, pillars, piers etc complete all as specified and as directed.
17M&L RCC (Noninal Mix) Type B0 1:2:4 (12.5 mm graded aggregate ) as in beams, cantilever, lintels etc complete all as specified and as directed.
18M&L RCC (Noninal Mix) Type B0 1:2:4 (12.5 mm graded aggregate ) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.
19M&L RCC (Noninal Mix) Type B0 1:2:4 (12.5 mm graded aggregate ) as in chajjas complete all as specified and as directed.
20Supply & laying sub class 'B' bricks for protection of cable and laid perpendicular to the trench all as specified & directed by Engineer-in-Charge.
21M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc ruogh finished surfaces of concrete flat complete all as specified and as directed.
22M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of complete all as specified and as directed.
23M&L form work to chullah hoods, chajjas and similar items incl edges rough finished surfaces of concrete flat complete all as specified and as directed.
24M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified and as directed.
25M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete complete all as specified and as directed.
26M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and as directed.
27M&L for MS round bars (Fe-410-W (Gde E-250) quality A or Fe-290 (Gde-E-165) 10mm dia and over cut to Length bent to shape required incl cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips complete all as specified and as directed.
28M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to complete all as specified and as directed.
29M&L mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to complete all as specified and as directed.
30Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders complete all as specified and as directed.
31Supply and Fixing mild steel screw bolts (machine made ) with hexagonal or square heads at one end, 5 to 10mm dia of neck , exc 5 cm & not exc 10 cm long, bolt with waher and nuts complete all as specified and as directed.
32Supply of 4mm dia GI wire chain link fencing with 75x75mm mesh size and fixed to any type of strandard rails straining bolts etc including provision of binding wire complete all as specified and as directed.
33Dismantling fencing wire mesh any type complete all as specified and as directed.
34Fixing only chain link fencing including line wires, any mesh, size and type fixed to any type of standards rails, straining bolts, etc.including provission of binding wire complete all as specified and as directed.
35S & F Framed work confirming to Fe 290 (Gde -E-165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
36Demoliton of precast cement concrete block walling, precast concrete articles etc. complete all as specified and as directed.
37M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete all as specified and as directed.
38M&L precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .
39M & L for Providing precast cement concrete type B1 (1:2:4) 20mm graded stone aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles set in cement mortar ( 1:6 ) complete all as specified and directed.
40M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:4 finished the plaster surfaces fair and even complete all as specified and directed.
41M&L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.
42M&L 15 mm thick cement plaster on otherthan fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.
43M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and as directed.
44M&L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate, complete all as specified and as directed.
45M&L for 100mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.
46M&L PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as floor finishing surface complete all as specified and as directed.
47M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement complete all as specified and as directed.
48Forming construction joints 30mm deep x10mm wide filled with sealing compound grade \\"A\\" complete all as specified and as directed.
49S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
50S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed.
51S&F, Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type B-21 and complete all as specified and as directed.
52S&F, 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.
53S&F, 125 mm extruded aluminum alloy handles, fabricated type anodised complete all as specified and as directed.
54S&F 250mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy ,complete all as specified and directed.
55S&F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings all as directed.
56S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture, fixed with tined tacks or galvanised wire staples complete all as specified and as directed.
57S&F standard aluminium section powder coated any colour as approved for window /ventilator frames/shutters sliding/ partitions etc including jointing cleat and rubber eading/linning, Pivot ,locking aragement and all hardware etc and fixed in position with stainless steel screws all as specified and as directed.
58S&F in glass 5.5 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.
59M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed.
60M&L three coats of white wash on walls including preparation of new plastered surface an complete all as specified and as directed.
61M&L for two coats of exterior emulsion paint (weather coat, anti dust of Berger or equivelent) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface over newly plastered surface of wall complete all as specified and as directed.
62S&F non-skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but n exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.
63M & L galzed ceramic coloured tiles area exc 0.11 Sqm but n.exc 0.18 Sqm on walls etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces over &.incl 10mm thick rendering in cement mortar 1:4 for laying wall tiles etc complete all as specified and directed.
64M & L for chequered cement concrete coloured tiles rubber moulded decorative designed, size of tiles as approved, with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over 20 mm thick screed bed,incl and over 100mm thick PCC 1:2:4 complete all as specified and as directed.
65Cutting chases in stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.
66S&F 15mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
67S&F 20mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
68S&F 20 mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.
69S&F 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.
70S&F 15mm bore dia Bib taps chromium plated with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed Model : Cat No FLR-5047N of JAGUAR.
71S&F PVC cabinet mirror size 350mm x 450mm fixed with steel screw with rowl plug complete all as specified and directed.
72Granite (of any type of coloured) work (table rubbed and polished) 20mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete.
73S&F Oval type Wash Hand Basin superior quality 550 x 400 mm size fitted and including suitable waste coupling with west pipe complete all as specified and directed.
74S&F Pillar taps droop swan Neck cast copper alloy with capstan heads CP screwed down for15nn GI iron pipe and fixed all as specified and as directed.
75S&F 32mm bore bottle trap of of PTMT having minium water seal of 25mm ( minimum weight 32mm-260gms) complete all as specified and directed.
76S&F 50mm PVC (SWR) pipes single socket in any length and including bends and sockets complete all as specified and directed.
77S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
78S&F aluminium peg sets of 6 pegs complete all as specified and as directed.
79S&F 450mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.
80S&F 600x450 mm bevelled edge of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.
81S&F Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.
82Supply & Fix vitreous china urinal, Half stall type, white (excluding flushing cistern) incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and as directed.
83Supply & Fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe ,with PVC cover sheet in same colour etc complete all as specified and directed.
84S&F PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed.
85S&F C P health faucet 1.25 mtr PVC tube with wall hook complete for EWC, all as specified and directed.
86S & F Soap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed.
87S&F Two way bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.
88S & F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
89Supply & Fix 1000 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed.
90S&F 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) complete all as specified and directed.
91S&F PVC (SWR) floor trap with CP grating including jointing to waste pipe 75 mm bore outlet with solvent complete all as specified and as directed.
92S&F PVC (SWR) bends 75 mm bore with or with out oval excess door complete all as specified and as directed.
93S&F PVC (SWR) bends 110 mm bore with or with out oval excess door complete all as specified and as directed
94S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete
95S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed laid in trenches or in floors etc complete all as specified and as directed.
96M&l for 10 MM thick plaster in CM 1:4, rendering is to be finished even and smooth (without using extra cement) complete all as specified and directed.
97Supply only, Bituminous primer (0.40 Ltr /Sqm) complete all as specified and directed.
98M&L for APP based polymeric membrane minimum weighing 3.kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.
99Material & Labour for Cement Concrete type D2 1:4:8, bed to sewage /drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in 200 mm dia complete all as specified and as directed.
100M&L for 200 mm dia reinforced concrete pipes, class NP2 with one collar per length of pipe complete all as specified and as directed .
101M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, complete all as specified and as directed.
102M&L for point wiring for one light/Fan/exh point controlled by one switch one way in & including concealed PVC conduit M/Grade ISI, using FRLSH PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including 3 mm thick plastic laminated sheet cover over concealed MS sunken box for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge. Note : (a) wiring shall be done by using proper colour coding.
103(a) One light point controlled by one way 5 Amps switch
104(b) One ceiling fan/exhaust fan point controlled by one, one way 5 Amps switch
105(c) One 3 pin socket outlet 5 Amps on independent board
106(d) One 3 pin socket outlet 5 Amps on same board
107All as per srl item No. 102 here-in-before but for 15 Amp independent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specified.
108S&F Switch piano flush type 5 Amp one Way 230 volts complete all as specified.
109S&F Socket outlet 3 pin 6 Amps flush type 230 volts complete all as specified.
110S&F Switch one way 15 Amps flush type 230 volts complete all as specified.
111S&F Socket outlet 2-in-1 3 pin 15/16 Amps flush type 230 volts complete all as specified.
112S&F ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified.
113S&F LED compact fitting/batten for single LED tube of 1x20W, 220V, AC decorative box type 4ft with integral LED driver (double side connection) including 20W, T8 tube rod complete all as directed by Engr-In-charge.
114S&F Holder PVC body with back plate for batten fitting suitable for LED lamp complete all as specified and directed by Engineer-in-Charge.
115S&F LED Adore Lamp 9Watt, B22 base 6500K CDL type complete all as directed by Engr-In-charge.
116S&F Sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-in-charge.
117S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.
118S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge.
119S&F of Exhaust fan, 300 mm sweep, 1400 rpm, MS body heavy duty, AC single phase, 230 volts with, blades, and frame and louvers including connection with 0.5 sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed.
120S&F 30W New generation energy saving and environmental friendly long life LED security light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 for flood light with GI pipe bracket or clamp with nut bolt of suitable size for fitting complete all as specified and directed by Engineer-in-charge.
121M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth Lead 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to DB as earth lead all as specified and testing on completion including provision of earth lead protected by 20 mm dia light grade GI pipe & watering pipe shall be 15 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 15 mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 20 mm bore light grade 7.5m.
122Supply, fixing & laying of Steel tubing light grade galvanised of size 25mm dia laid in trench or fixed to wall complete all as specified & directed.
123Supply, laying in trenches or passing through pipes and testing cable XLPE Insualted screened PVC bedded, galvanised steel strip armored, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 Sqmm 2 Core including taking down the existing cable of any size complete all as specified and directed.
124Supply, fixing & laying of steel tubing medium grade galvanised of size 25mm dia laid in trench or fixed to wall complete all as specified and directed by Enginer-in-Charge.
125M&L for cutting the existing GI pipe line and inserting Tee of any size and connecting the new pipe line of size 25mm dia including fittings etc. complete all as specified and directed by Engr-in- charge
126Supply and fixing Gun-metal gate valves 25mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
127Demolition of Cement concrete (unreinforced) of any description and in any position not otherewise specifically provided complete all as specified and directed.
128Dismantling structural steel work in cluding doors ,gates but excluding framed truss etc. complete all as specifed and directed.
129M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
130M&L, preparing of new steel surface not exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
131S & F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolt, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc all as specified and directed Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58384363
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 25-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repairs To Perimeter Chain Link Fencing Of Suply Point Asc And Provn Of One Toilet Block Near Trg Complex At Mil Stn Dhrangadhra
Basic Detail
Tender No GE(A)/GNR/TOKEN/92 of 2026-27
Bidding Type Tender
Location
City Surendranagar
State Gujarat
Key Dates
Publish Date 04 Nov 2026
Submission Date 25 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 75000
Exemption Available
Document List
BOQ_894396.xls
e007b042-ef39-41b6-85c4-b0569a0c9824.html
TenderDocuments.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_894396.xls

html

e007b042-ef39-41b6-85c4-b0569a0c9824.html

pdf

TenderDocuments.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender