Tender For Repair/Maintenance To Flooring From N-17 To N-26 At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
Tender Value
1.49 Crore
Estimated cost
Bid Submission
02 Dec 2026
19 days left
EMD
2.24 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Maintenance To Flooring From N-17 To N-26 At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | M&L for removing the existing damaged, peeled out floor treatment of any description (20mm average thickness) by mechanical / hand tools to expose the concrete surface and disposal of the rubbish from the Naval Dockyard complete all as spcified and directed. |
| 2 | M&L for surface preparation of the existing rough surfaces of concrete (after removal of existing flooring under item No 1 above) by means of mechanical grinding to achieve a rough, co-herent substrate having an excellent anchor profile, removing all the loose particles, dirt etc., clean with high pressure water jet and allow it to dry complete all as specified and directed. |
| 3 | M&L for application of bonding coat on the prepared old concrete surfaces of the jetty with two component epoxy based bonding agent Nitobond EP of Fosroc make or make as approved by GE for laying 20mm thick cementitious flooring system complete all as specified and directed. |
| 4 | M&L for 20mm thick cementitious flooring system after application of epoxy based bonding agent on the prepared jetty floor with Nitoflor Levelcrete of Fosroc make or make as approved by GE having a compressive strength of 40Mpa complete all as specified and directed. |
| 5 | M&L for fixing injection grouting nozzle of suitable size and injecting grouting material, low viscosity epoxy based grouting material conbextra EP10 or make as approved by GE into the craces with pressure of 40 PSI mechanixcally including sealing the hole completely. Note :- Conbextra EP10 or make as approved by GE epoxy grouting material shall be measured and paid seperately. |
| 6 | Supply and low viscosity epoxy based injection grouting material complete all as specified and directed. |
| 7 | M&L for crack repairs by widening the cracks 0.25mm to 9mm wide, groove cutting to V shape in existing jetty slabs, cleaning out by removing loose particles by mechanical blower and application of Epoxy based primer Nitoprime 25 or make as approved by GE to the groove and allow it to dry and application of Epoxy putty Nito VF or make as approved by GE in the prepared groove after complete drying of the applied primer complete all as specified and directed. |
| 8 | M&L for patch repair in concrete surfaces of any depth as required with shrinkage controlled polymer modified fibre reinforced cementitious patch repair mortar Renderoc SP40 of Fosroc make or make as approved by GE having a compressive strength of 45 Mpa over a coat of Nitobond SBR or make as approved by GE on the base surfaces includung taking out the old loose concrete complete all as specified and directed.Note : 25 Kg of Renderoc SP40 bag of Fosroc make or make as approved by GE ready to use at site by mixing with water at 4.25 Ltr per bag shall be used for patch repairs in concrete. |
| 9 | All as per item No. 8.00 above, but for traffic line marking 100 wide over finished flooring to the required length, colour and shapes for parking, safety markings on jetty, hard standings, roads etc., |
| 10 | M&L for preparation of construction joint grooves of size 25 mm X 20 mm, application of primer to the groove, inserting breaker rod in the groove and finally sealing the groove with Polyuretheane based flooring sealent Colpor 200 of Fosroc make or make as approved by GE and finishing complete all as specified and directed. |
| 11 | M&L for forming contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified and directed.. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender