Tender For Repair And Maintenance Of Utility Buildings Required In View Of Vvip/Vip Visits From N-4 To N-26 Jetty At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
Tender Value
75 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
1.37 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Utility Buildings Required In View Of Vvip/Vip Visits From N-4 To N-26 Jetty At Naval Dockyard Visakhapatnam Under Ge(I) Dm Visakhapatnam
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on walls/ceiling etc including racking out joints hacking for key, scrubbing down with water complete all as specified and directed. |
| 2 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement and using WPC at the rate of 3% by weight of cement complete all as specified and directed. Note :- WPC will be paid separately. |
| 3 | M&L for rendering 10mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces of ceilings finished even & smooth(without using extra cement complete all as specified and directed. |
| 4 | M&L for rendering 5mm thick cement plaster 1:3 on fair faces concrete surfaces of ceilings finished even & smooth(without using extra cement complete all as specified and directed. |
| 5 | Supply only integral water proofing compound all as specified and directed. |
| 6 | M&L for preparation of new plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm diluted with water as per manufacturer instructions by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface complete all as specified and directed.over new surfaces over applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 7 | M&L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion by using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete over a coat of primer with 3mm thick wall care putty on wall complete all as specified and directed.Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 8 | M&L for Preparation of new plastered surfaces of ceiling and applying two coats of distemper oil emulsion by using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete over a coat of primer 3mm thick wall care putty on ceiling complete all as specified and directed.Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 9 | Complete removal of existing treatment on walls and M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface over with one coat of birla putty complete all as specified and directed.Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 10 | M&L for complete removal of existing treatment on ceiling and applying two coats of distemper oil emulsion by using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface over one coat of primer over 3mm thick wall care putty on ceiling complete all as specified and directed.Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 11 | M&L for preparation of old surfaces of wall and applying one coat of weather proof exterior emulsion paintby using Airless spray technology machine with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be from reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and acccessories for applying paint in hard to reach areas and penetration of paint on the surface complete all as specified and directed. |
| 12 | M&L for preparation of old surfaces of wall and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.complete. |
| 13 | M&L for preparation of old surfaces of wall and applying two coats of white wash complete all as specified and directed. |
| 14 | M&L for preparation of old surfaces of ceilling and applying two coats of white wash complete all as specified and directed. |
| 15 | M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed. |
| 16 | M&L for finishing walls with textured exterior paint of required shade: New work( two or more coats applied @3.28ltr/10sqm) over and including priming coat of exterior primer applied @ 2.20kg/10sqm complete all as specified and directed. |
| 17 | Note: 1. The above quoted items Ser No. 1.00 to 16.00 are to be executed with:-(a) proper safety gears and necessary double scaffolding arrangements to carry out the repair works. The rates quoted shall be accordingly considered for all the safety measure, scaffolding, height, lead and lift in the items.(b) The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Colour wash, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.(c.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender