Tender For Construction Of Ofice Building For Rws&S Sub-Division Sohela Under Rws&S Division Baragada
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Nov 2026
1 days left
EMD
39000
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Ofice Building For Rws&S Sub-Division Sohela Under Rws&S Division Baragada
BOQ
| Sl. No. | Item Description |
| 1 | GROUND FLOOR Earth work in excavation of foundation in hard soil or gravelly soil including dressing and leveling the bed and disposal of the excavated materials within initial leads and lifts as per direction of E.I.C. |
| 2 | Supplying & filling foundation and plinth with sand well watered and rammed including cost, cost of all labour, carriage, royalty, taxes, T&P etc complete. |
| 3 | Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 4 | Brick work with Fly Ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 5 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete. Column base,Padestal |
| 6 | Gr-Beam |
| 7 | Lintal(10\\" wall) |
| 8 | Chajja |
| 9 | Wall beam / Column in superstructure |
| 10 | Shelve |
| 11 | Roof slab,portico |
| 12 | Stair |
| 13 | Providing uncoated HYSD Bar reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete. |
| 14 | Fly Ash brick work masonary in cement mortar (1:6) in Superstructure using FlyAsh bricks of 23cmx11cmx8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance + 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering & curing after immersing the bricks in water at least for six hours before use inclduing cost,conveyance,royalties and taxes of all materials with all labour and T&P required for the work complete in all respect in all floors. |
| 15 | 12mm thick C.P. in C.M.(1:6) over brick masonary to the outside smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 16 | 16mm thick C.P. in C.M.(1:6) over brick masonary to the inside rough surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 17 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 18 | Supplying, fitting and fixing vitrified tile (Plain) in floors of size 600mm x 600mm of approved make conformaing to IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of E.I.C. (For New work only) |
| 19 | Fixing granite tile (Above 0.40 Sqm) (20mm thick) in floors treads or steps and landing on 20mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost, carriage, royalty & taxes of all material, cost of all labour T&P etc. complete. |
| 20 | Fixing Chequred tiles in floors treads or steps and on 20mm thick bed of cement mortar 1:4 (1cement : 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost, carriage, royalty & taxes of all materials, cost of all labours T&P etc complete. |
| 21 | Fixing Vitrified tiles (size 600mmx600mm) (Plain/ Printed) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. |
| 22 | Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Ventilator / Top Hung - 60 - Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards etc. complete as per direction of the Engineer-In-Charge. |
| 23 | Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) FENESTA / NCL or equivalent Casement door -60 series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 102mm x 60mm x 2.25mm for casement Door sash profile and 74mm x 60mm x 2.25mm for millon profile capable of mounting single slazing system , structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 2.0mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick clear WPC board of green plymake duly fixed with EPDM weathered seal resistance accessories like clipping lock system made up aluminium1 noper set of sashesand the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, wraping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work (confrming ASTM D638-14,EN-477-95) (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge., |
| 24 | Supplying of M.S. Door, Window with grills, Grills, collapsible gates made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour T&P, carriage of materials to site etc. complete. |
| 25 | Labour charges for fitting, fixing M.S. gates (M.S. Door, Window with grills, Grills, collapsible gates) as per approved design including cost of all labour, T&P etc. complete. |
| 26 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. (in all floor) |
| 27 | Finishing surface of walls with Cement based wall putty & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc. complete. |
| 28 | Priming 1 coat with wall primer water bond cement primer including all labour, materials, T&P etc. complete. |
| 29 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
| 30 | Finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete . |
| 31 | Painting two coats of enamel paint over a coat of primer to wood/iron work of any approved shade incluiding all taxes and cost of all materials and cost of all labour with T&P required for the work complete. |
| 32 | Providing and Fixing of Paving Block …etc…complete |
| 33 | C.C. (1:2:4) with 12mm and down grade C.B. chips approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 34 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge for 100 cum |
| 35 | Second Floor( Head Room) R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete.Column & Beam in Supertructure Column and Wall Beam |
| 36 | Lintel(10\\" wall) |
| 37 | Chhaja front |
| 38 | Roof slab |
| 39 | Providing uncoated HYSD bar reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete. |
| 40 | Fly Ash brick work masonary in cement mortar (1:6) in Superstructure using FlyAsh bricks of 23cmx11cmx8cm size having a crushing strength of not less than 75 kg/cm2 with dimensional tolerance + 8% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering & curing after immersing the bricks in water at least for six hours before use inclduing cost,conveyance,royalties and taxes of all materials with all labour and T&P required for the work complete in all respect in all floors. |
| 41 | 12mm thick C.P. in C.M.(1:6) over brick masonary to the outside smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 42 | 16mm thick C.P. in C.M.(1:6) over brick masonary to the inside rough surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 43 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 44 | Supply and fixing of Un-plasticised Poly Vinyl Chloride (UPVC) FENESTA / NCL or equivalent compound door - 60 series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for frames, 102mm x 60mm x 2.25mm for casement Door sash profile and 74mm x 60mm x 2.25mm for glass sash profile, capable of mounting single glazing slazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 2.0mm prefabricated & welded through fusion welding. The door sash shall be fitted with 12mm thick clear WPC board of green plymake duly fixed with EPDM weathered seal resistant accessories like clip locking system made up aluminium 1 noper set of sash and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site with 10 years manufactures warranty for discoloration, warping, mechanical failures, shrinkages, rotting, corrosion etc. with a quality certificate from relevant department of Govt. of India, including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for cement sizing complete for finished item of work (confirming ASTM D638-14, EN-477-95) (structural requirements profiles are to be got approved by the Engineer-in-Charge of the work before fabrication of the shutter) as per specification and direction of the Engineer-in-Charge. |
| 45 | 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard crusher broken granite chips on new work including watering curing cost of all materials, water-proofing compounds, T.& P. required for the works etc complete. |
| 46 | Finishing surface of walls with Cement based wall putty & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc. complete. |
| 47 | Priming 1 coat with wall primer water bond cement primer including all labour, materials, T&P etc. complete. |
| 48 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
| 49 | Finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender