Water Resources and Irrigation Government Departments Closing in 1 days TDR #58383716

Tender For Installation And Energisation Of Talapada-I, Talapada-Ii, Teramanapur-Ii And Teramanapur-Iii T.W. Projects Under Kujanga Block In Jagatshinghpur District Under Ridf 2026-27

Issued by Government Departments · Cuttack, Odisha
Tender Value
1.19 Crore
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
1.19 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Installation And Energisation Of Talapada-I, Talapada-Ii, Teramanapur-Ii And Teramanapur-Iii T.W. Projects Under Kujanga Block In Jagatshinghpur District Under Ridf 2026-27

BOQ

Name of Work:- INSTALLATION AND ENERGISATION OF TALAPADA-I, Talapada-II, Teramanapur-II and Teramanapur-III T.W. PROJECTS UNDER KUJANGA BLOCK IN JAGATSHINGHPUR DISTRICT UNDER RIDF 2026-27
Sl. No. Item Description
1TALAPADA-IEarth work in excavation of Foundation and plinth in hard soil including dressing and levelling of bed within initial lead of 50mtr.andlifi 1.5mtr etc complete as per the direction of the Engineer-in-charge.
2Excavation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels, within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods and stacking rubble or spreading and leveling within the site as the case may be etc; complete.asper direction of the Engineer-in-charge.(Mechanical 60% & Mannual 40%)
3Filling in foundation and plinth with sand including watering and ramming etc complete as per the direction of the Engineer-incharge.
4Cement concrite(1:4:8) with 4cm size h.g.b. crusser broken metal of approved quality from approved quarry with ramming watering and curring etc.complete including cost , taxes, royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
5Cement concrite(1:2:4) with 12mm size black Crusher broken chips of approved quality from approved quarry with ramming watering and curring etc.complete including supply of all labours, cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
6Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having croshing strength not less than 75 kg/cm2 with dimensional tolerrance± 2% in cement morter (1:6) in foundation and plinth etc. complete as per the Engineer-incharge.
7Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having croshing strength not less than 75 kg/cm2 with dimensional tolerrance±2% in cement morter (1:6) in superstructure work etc. complete as per the Engineer-incharge.
812mm thick cement plaster in cement morter(1:6)finished smooth to brick work after racking out joints including watering and curring etc.complete including cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-in-charge.
9Rigid smooth centering & shuttering for R.C.C. Works walls & fins including false work & dismateling them after 28 days of curing including cost of all materials complete as per direction of Egineer-In-Charge
10R.C.C. work in C.C.(1:2:4) including hoisting, laying & curing for 28 days with 12mm size black Crusher broken chips of approved quality from approved quarry with ramming watering and curring etc.complete including supply of all labours, cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
11Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & tying the grills & placing in position including cost of binding wire 18 to 20 gauge including cost of HYSD steel bar etc. complete.
12Cement punning over plastering including watering & curing with cost, taxes, royality & conveyance charges of all materials & supply of all materials & T& P etc complte as per direction of Engineer- in - charge.
13Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-incharge.
14Filling in F&P with excavated materials including well watered and rammed.(2/3 of respective earth work)
15Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete.
162.5cm A.S. flooring with C.C.(1:2:4) including punning with 12mm size chips.
172.5cm D.P.C. with C.C.(1:2:4) using 12mm size chips.
18Cost of Single Pannel Door of size (1.0 mx2.0m) made out of M.S.Frame (35mmx35mmx5mm) with G.P.Sheet pannel of 1.20 mm thick and iron ventilator(size 0.45x0.30m) including fitting at site with all cost etc. complete as per direction of Engineer in charge.
19Colour washing two coats over 2 coats white washing with shell lime including cost of paint & labour etc complete.
20White wash two coats with shell lime
21Painting of red oxide primer for priming over iron work including cost of red oxide & labour etc complete.
22Painting two coats with enamel paint for priming over iron work including cost of paint & labour etc complete.
23Cost of pump chamber wiring with all cost of wiring materials, labour etc complete.
24Fitting of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing & all cost etc fitting & fixing of required nos. of HDPE Teee for outlet & shaddle & G.I. raiser, nipple for fitting of air valve, equal Tee etc. complete including conveyance of pipe from factory to work site & testing of pipe line etc complete as per direction of Engineer - in-charge.
25Labour charges for lowering & Instalation of 7.5HP submersible pump Sets including fitting and fixing of delivery pipe to motor,NR Valve, Sluice valve and other fitting materials including cutting, welding and etc. including transportation to project site and site clearance etc. complete as per the direction of the Engineer-incharge.
26Fabrication of special joint including cutting and welding of pipes out of M.S. pipe / 100mm dia G.I.pipe including welding charges etc. complete.
27Laying & fitting of ARV/BFV/GI weldless Tee
28Construction of outlet at Tank
29100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark.
30100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed company.
31100mm dia G.I.Socket(Medium duty) with ISI mark
32100mm dia G.I.Flange ( Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed company.
33Cost of 7.5 HP Submerssible Pumpset 900 LPM at head of 25 mtr
34Supply of 160 mm Ø HDPE. Pipe PE - 80 ( PN-4) to deliver water at highest counter in complete shape and handed over to Pani Panchayat Chairman or Secretary.
352.5 sqmm submersible (3 core) flat cable
36200x100 mm dia M.S. T/W cap
37100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed company.
38100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed company.
39100 mm dia M.S, T/W Clamp (Pair)
40160mm HDPE elbow spigot design 6 Kg. of ISI mark
41150mm dia C.I. Butter Fly Valve BS:5155/15: Kirloskar or equivalent make13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022)
4250MM DIA Air release valve with saddle &Raiser pipe.The air release valve shall confirm to IS14845 with ISImark including all taxes &royality etc.
43Cost of 160 mm Ø HDPE Bend
44160X160X160 mm HDPE Tee spigot design 6 kg
45160 mm slipon flange
46Cost, supplying of 160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
47160 MM HDPE Tail piece 160 mm long
48160mm HDPE End cap
49Cost of 6 mm dia PVC Insulated Steel Wire rope
505/8 ' x3\\" Nut bolt F.T.
51⅛\\" thick Rubber Insertion
52Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp.
534.0 mm PVC Single Core Copper Wire ISI mark of reputed Company.
54160mmX110mm HDPE Reducer
553x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site.
56Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion.Drilling for 200 (8”) dia pipe: From 0 mtr. to 100th meters
57Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion.Drilling for 200 (8”) dia pipe: From 101st mtr. to 200th meters
58Supply of all Labour & T&P for lowering the following sizes of PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials.200mm dia PVC/GI Casing pipes
59Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge.
60Supplying all materials,Labour T & P for packing the bore with washed gravel size (P-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction Engineer-in-charge. (50m depth) =0.786 x (0.4² - 0.2²) x 50mtr = 4.716 say 4.7 cum
61Supply of all labour & T&P for logging the drilled hole for tube well from ground level to the lowest level of drilled hole and provide the report for preparation and planning of assembly lowering.
62Supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of Engg in charge(including Cost of Cement and bentonite)
63Labour charges for cutting Transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification
64Threading charges
658\\" PVC bail plug
668\\" PVC threaded end cap PN-10
67200mm x 12\\" long PVC shot piece
68200mm Ø Sch, 80 casing pipe
69Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with 55 Sqmm AAAC Conductor average span length 40mtr with ,11 KV \\"V\\" Cross arm, with required No.of 11 KV T & C Disc. Polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc if required including cost of all materials, labour transportation,inspection & commissioning etc. complete.
70Construction and erection of 11 /0.4 KV, 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPCOCL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning as per specification of TPCODL etc complete.
7190 Deg. Cut point.
72180 Deg.cut point
73Tapping pole /Interprosing pole 9 mtr.
74Electrical installation with electrical materials such as PVC tape, Ampere tape, 7/20 PVC copper wire, 3/20 PVC copper wire, GI flexible conduite pipe, No. 6 GI wire, Copper cable socket, GI socket and flange and petty materials required for electrical installation.All materials should be as per IS
75Electrical earthing including all materials as per the direction of the Engineer-incharge
76TALAPADA-IIEarth work in excavation of Foundation and plinth in hard soil including dressing and levelling of bed within initial lead of 50mtr.andlifi 1.5mtr etc complete as per the direction of the Engineer-in-charge.
77Excavation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels, within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods and stacking rubble or spreading and leveling within the site as the case may be etc; complete.asper direction of the Engineer-in-charge.(Mechanical 60% & Mannual 40%)
78Filling in foundation and plinth with sand including watering and ramming etc complete as per the direction of the Engineer-incharge.
79Cement concrite(1:4:8) with 4cm size h.g.b. crusser broken metal of approved quality from approved quarry with ramming watering and curring etc.complete including cost , taxes, royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
80Cement concrite(1:2:4) with 12mm size black Crusher broken chips of approved quality from approved quarry with ramming watering and curring etc.complete including supply of all labours, cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
81Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having croshing strength not less than 75 kg/cm2 with dimensional tolerrance± 2% in cement morter (1:6) in foundation and plinth etc. complete as per the Engineer-incharge.
82Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having croshing strength not less than 75 kg/cm2 with dimensional tolerrance±2% in cement morter (1:6) in superstructure work etc. complete as per the Engineer-incharge.
8312mm thick cement plaster in cement morter(1:6)finished smooth to brick work after racking out joints including watering and curring etc.complete including cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-in-charge.
84Rigid smooth centering & shuttering for R.C.C. Works walls & fins including false work & dismateling them after 28 days of curing including cost of all materials complete as per direction of Egineer-In-Charge
85R.C.C. work in C.C.(1:2:4) including hoisting, laying & curing for 28 days with 12mm size black Crusher broken chips of approved quality from approved quarry with ramming watering and curring etc.complete including supply of all labours, cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
86Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & tying the grills & placing in position including cost of binding wire 18 to 20 gauge including cost of HYSD steel bar etc. complete.
87Cement punning over plastering including watering & curing with cost, taxes, royality & conveyance charges of all materials & supply of all materials & T& P etc complte as per direction of Engineer- in - charge.
88Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-incharge.
89Filling in F&P with excavated materials including well watered and rammed.(2/3 of respective earth work)
90Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete.
912.5cm A.S. flooring with C.C.(1:2:4) including punning with 12mm size chips.
922.5cm D.P.C. with C.C.(1:2:4) using 12mm size chips.
93Cost of Single Pannel Door of size (1.0 mx2.0m) made out of M.S.Frame (35mmx35mmx5mm) with G.P.Sheet pannel of 1.20 mm thick and iron ventilator(size 0.45x0.30m) including fitting at site with all cost etc. complete as per direction of Engineer in charge.
94Colour washing two coats over 2 coats white washing with shell lime including cost of paint & labour etc complete.
95White wash two coats with shell lime
96Painting of red oxide primer for priming over iron work including cost of red oxide & labour etc complete.
97Painting two coats with enamel paint for priming over iron work including cost of paint & labour etc complete.
98Cost of pump chamber wiring with all cost of wiring materials, labour etc complete.
99Fitting of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing & all cost etc fitting & fixing of required nos. of HDPE Teee for outlet & shaddle & G.I. raiser, nipple for fitting of air valve, equal Tee etc. complete including conveyance of pipe from factory to work site & testing of pipe line etc complete as per direction of Engineer - in-charge.
100Labour charges for lowering & Instalation of 7.5HP submersible pump Sets including fitting and fixing of delivery pipe to motor,NR Valve, Sluice valve and other fitting materials including cutting, welding and etc. including transportation to project site and site clearance etc. complete as per the direction of the Engineer-incharge.
101Fabrication of special joint including cutting and welding of pipes out of M.S. pipe / 100mm dia G.I.pipe including welding charges etc. complete.
102Laying & fitting of ARV/BFV/GI weldless Tee
103Construction of outlet at Tank
104100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark.
105100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed company.
106100mm dia G.I.Socket(Medium duty) with ISI mark
107100mm dia G.I.Flange ( Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed company.
108Cost of 7.5 HP Submerssible Pumpset 900 LPM at head of 25 mtr
109Supply of 160 mm Ø HDPE. Pipe PE - 80 ( PN-4) to deliver water at highest counter in complete shape and handed over to Pani Panchayat Chairman or Secretary.
1102.5 sqmm submersible (3 core) flat cable
111200x100 mm dia M.S. T/W cap
112100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed company.
113100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed company.
114100 mm dia M.S, T/W Clamp (Pair)
115160mm HDPE elbow spigot design 6 Kg. of ISI mark
116150mm dia C.I. Butter Fly Valve BS:5155/15: Kirloskar or equivalent make13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022)
11750MM DIA Air release valve with saddle &Raiser pipe.The air release valve shall confirm to IS14845 with ISImark including all taxes &royality etc.
118Cost of 160 mm Ø HDPE Bend
119160X160X160 mm HDPE Tee spigot design 6 kg
120160 mm slipon flange
121Cost, supplying of 160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
122160 MM HDPE Tail piece 160 mm long
123160mm HDPE End cap
124Cost of 6 mm dia PVC Insulated Steel Wire rope
1255/8 ' x3\\" Nut bolt F.T.
126⅛\\" thick Rubber Insertion
127Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp.
1284.0 mm PVC Single Core Copper Wire ISI mark of reputed Company.
129160mmX110mm HDPE Reducer
1303x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site.
131Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion.Drilling for 200 (8”) dia pipe: From 0 mtr. to 100th meters
132Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion.Drilling for 200 (8”) dia pipe: From 101st mtr. to 200th meters
133Supply of all Labour & T&P for lowering the following sizes of PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials.200mm dia PVC/GI Casing pipes
134Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge.
135Supplying all materials,Labour T & P for packing the bore with washed gravel size (P-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction Engineer-in-charge. (50m depth) =0.786 x (0.4² - 0.2²) x 50mtr = 4.716 say 4.7 cum
136Supply of all labour & T&P for logging the drilled hole for tube well from ground level to the lowest level of drilled hole and provide the report for preparation and planning of assembly lowering.
137Supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of Engg in charge(including Cost of Cement and bentonite)
138Labour charges for cutting Transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification
139Threading charges
1408\\" PVC bail plug
1418\\" PVC threaded end cap PN-10
142200mm x 12\\" long PVC shot piece
143200mm Ø Sch, 80 casing pipe
144Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with 55 Sqmm AAAC Conductor average span length 40mtr with ,11 KV \\"V\\" Cross arm, with required No.of 11 KV T & C Disc. Polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc if required including cost of all materials, labour transportation,inspection & commissioning etc. complete.
145Construction and erection of 11 /0.4 KV, 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPCOCL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning as per specification of TPCODL etc complete.
14690 Deg. Cut point.
147180 Deg.cut point
148Electrical installation with electrical materials such as PVC tape, Ampere tape, 7/20 PVC copper wire, 3/20 PVC copper wire, GI flexible conduite pipe, No. 6 GI wire, Copper cable socket, GI socket and flange and petty materials required for electrical installation.All materials should be as per IS
149Electrical earthing including all materials as per the direction of the Engineer-incharge
150TERAMANAPUR-II Earth work in excavation of Foundation and plinth in hard soil including dressing and levelling of bed within initial lead of 50mtr.andlifi 1.5mtr etc complete as per the direction of the Engineer-in-charge.
151Excavation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels, within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods and stacking rubble or spreading and leveling within the site as the case may be etc; complete.asper direction of the Engineer-in-charge.(Mechanical 60% & Mannual 40%)
152Filling in foundation and plinth with sand including watering and ramming etc complete as per the direction of the Engineer-incharge.
153Cement concrite(1:4:8) with 4cm size h.g.b. crusser broken metal of approved quality from approved quarry with ramming watering and curring etc.complete including cost , taxes, royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
154Cement concrite(1:2:4) with 12mm size black Crusher broken chips of approved quality from approved quarry with ramming watering and curring etc.complete including supply of all labours, cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
155Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having croshing strength not less than 75 kg/cm2 with dimensional tolerrance± 2% in cement morter (1:6) in foundation and plinth etc. complete as per the Engineer-incharge.
156Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having croshing strength not less than 75 kg/cm2 with dimensional tolerrance±2% in cement morter (1:6) in superstructure work etc. complete as per the Engineer-incharge.
15712mm thick cement plaster in cement morter(1:6)finished smooth to brick work after racking out joints including watering and curring etc.complete including cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-in-charge.
158Rigid smooth centering & shuttering for R.C.C. Works walls & fins including false work & dismateling them after 28 days of curing including cost of all materials complete as per direction of Egineer-In-Charge
159R.C.C. work in C.C.(1:2:4) including hoisting, laying & curing for 28 days with 12mm size black Crusher broken chips of approved quality from approved quarry with ramming watering and curring etc.complete including supply of all labours, cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
160Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & tying the grills & placing in position including cost of binding wire 18 to 20 gauge including cost of HYSD steel bar etc. complete.
161Cement punning over plastering including watering & curing with cost, taxes, royality & conveyance charges of all materials & supply of all materials & T& P etc complte as per direction of Engineer- in - charge.
162Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-incharge.
163Filling in F&P with excavated materials including well watered and rammed.(2/3 of respective earth work)
164Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete.
1652.5cm A.S. flooring with C.C.(1:2:4) including punning with 12mm size chips.
1662.5cm D.P.C. with C.C.(1:2:4) using 12mm size chips.
167Cost of Single Pannel Door of size (1.0 mx2.0m) made out of M.S.Frame (35mmx35mmx5mm) with G.P.Sheet pannel of 1.20 mm thick and iron ventilator(size 0.45x0.30m) including fitting at site with all cost etc. complete as per direction of Engineer in charge.
168Colour washing two coats over 2 coats white washing with shell lime including cost of paint & labour etc complete.
169White wash two coats with shell lime
170Painting of red oxide primer for priming over iron work including cost of red oxide & labour etc complete.
171Painting two coats with enamel paint for priming over iron work including cost of paint & labour etc complete.
172Cost of pump chamber wiring with all cost of wiring materials, labour etc complete.
173Fitting of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing & all cost etc fitting & fixing of required nos. of HDPE Teee for outlet & shaddle & G.I. raiser, nipple for fitting of air valve, equal Tee etc. complete including conveyance of pipe from factory to work site & testing of pipe line etc complete as per direction of Engineer - in-charge.
174Labour charges for lowering & Instalation of 7.5HP submersible pump Sets including fitting and fixing of delivery pipe to motor,NR Valve, Sluice valve and other fitting materials including cutting, welding and etc. including transportation to project site and site clearance etc. complete as per the direction of the Engineer-incharge.
175Fabrication of special joint including cutting and welding of pipes out of M.S. pipe / 100mm dia G.I.pipe including welding charges etc. complete.
176Laying & fitting of ARV/BFV/GI weldless Tee
177Construction of outlet at Tank
178100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark.
179100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed company.
180100mm dia G.I.Socket(Medium duty) with ISI mark
181100mm dia G.I.Flange ( Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed company.
182Cost of 7.5 HP Submerssible Pumpset 900 LPM at head of 25 mtr
183Supply of 160 mm Ø HDPE. Pipe PE - 80 ( PN-4) to deliver water at highest counter in complete shape and handed over to Pani Panchayat Chairman or Secretary.
1842.5 sqmm submersible (3 core) flat cable
185200x100 mm dia M.S. T/W cap
186100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed company.
187100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed company.
188100 mm dia M.S, T/W Clamp (Pair)
189160mm HDPE elbow spigot design 6 Kg. of ISI mark
190150mm dia C.I. Butter Fly Valve BS:5155/15: Kirloskar or equivalent make13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022)
19150MM DIA Air release valve with saddle &Raiser pipe.The air release valve shall confirm to IS14845 with ISImark including all taxes &royality etc.
192Cost of 160 mm Ø HDPE Bend
193160X160X160 mm HDPE Tee spigot design 6 kg
194160 mm slipon flange
195Cost, supplying of 160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
196160 MM HDPE Tail piece 160 mm long
197160mm HDPE End cap
198Cost of 6 mm dia PVC Insulated Steel Wire rope
1995/8 ' x3\\" Nut bolt F.T.
200⅛\\" thick Rubber Insertion
201Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp.
2024.0 mm PVC Single Core Copper Wire ISI mark of reputed Company.
203160mmX110mm HDPE Reducer
2043x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site.
205Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion.Drilling for 200 (8”) dia pipe: From 0 mtr. to 100th meters
206Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion.Drilling for 200 (8”) dia pipe: From 101st mtr. to 200th meters
207Supply of all Labour & T&P for lowering the following sizes of PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials.200mm dia PVC/GI Casing pipes
208Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge.
209Supplying all materials,Labour T & P for packing the bore with washed gravel size (P-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction Engineer-in-charge. (50m depth) =0.786 x (0.4² - 0.2²) x 50mtr = 4.716 say 4.7 cum
210Supply of all labour & T&P for logging the drilled hole for tube well from ground level to the lowest level of drilled hole and provide the report for preparation and planning of assembly lowering.
211Supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of Engg in charge(including Cost of Cement and bentonite)
212Labour charges for cutting Transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification
213Threading charges
2148\\" PVC bail plug
2158\\" PVC threaded end cap PN-10
216200mm x 12\\" long PVC shot piece
217200mm Ø Sch, 80 casing pipe
218Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with 55 Sqmm AAAC Conductor average span length 40mtr with ,11 KV \\"V\\" Cross arm, with required No.of 11 KV T & C Disc. Polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc if required including cost of all materials, labour transportation,inspection & commissioning etc. complete.
219Construction and erection of 11 /0.4 KV, 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPCOCL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning as per specification of TPCODL etc complete.
22090 Deg. Cut point.
221Electrical installation with electrical materials such as PVC tape, Ampere tape, 7/20 PVC copper wire, 3/20 PVC copper wire, GI flexible conduite pipe, No. 6 GI wire, Copper cable socket, GI socket and flange and petty materials required for electrical installation.All materials should be as per IS
222Electrical earthing including all materials as per the direction of the Engineer-incharge
223TERAMANAPUR-III Earth work in excavation of Foundation and plinth in hard soil including dressing and levelling of bed within initial lead of 50mtr.andlifi 1.5mtr etc complete as per the direction of the Engineer-in-charge.
224Excavation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels, within 50m. Initial lead and 1.5m. Initial lift including rough dressing and breaking clods and stacking rubble or spreading and leveling within the site as the case may be etc; complete.asper direction of the Engineer-in-charge.(Mechanical 60% & Mannual 40%)
225Filling in foundation and plinth with sand including watering and ramming etc complete as per the direction of the Engineer-incharge.
226Cement concrite(1:4:8) with 4cm size h.g.b. crusser broken metal of approved quality from approved quarry with ramming watering and curring etc.complete including cost , taxes, royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
227Cement concrite(1:2:4) with 12mm size black Crusher broken chips of approved quality from approved quarry with ramming watering and curring etc.complete including supply of all labours, cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
228Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having croshing strength not less than 75 kg/cm2 with dimensional tolerrance± 2% in cement morter (1:6) in foundation and plinth etc. complete as per the Engineer-incharge.
229Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having croshing strength not less than 75 kg/cm2 with dimensional tolerrance±2% in cement morter (1:6) in superstructure work etc. complete as per the Engineer-incharge.
23012mm thick cement plaster in cement morter(1:6)finished smooth to brick work after racking out joints including watering and curring etc.complete including cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-in-charge.
231Rigid smooth centering & shuttering for R.C.C. Works walls & fins including false work & dismateling them after 28 days of curing including cost of all materials complete as per direction of Egineer-In-Charge
232R.C.C. work in C.C.(1:2:4) including hoisting, laying & curing for 28 days with 12mm size black Crusher broken chips of approved quality from approved quarry with ramming watering and curring etc.complete including supply of all labours, cost.taxes,royality convence charges of all materials to work site,supply of cement T&P required etc.comelete as per the direction of the Engineer-incharge.
233Labour charge for M.S. reinforcement for R.C.C. work including cutting, bending & tying the grills & placing in position including cost of binding wire 18 to 20 gauge including cost of HYSD steel bar etc. complete.
234Cement punning over plastering including watering & curing with cost, taxes, royality & conveyance charges of all materials & supply of all materials & T& P etc complte as per direction of Engineer- in - charge.
235Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-incharge.
236Filling in F&P with excavated materials including well watered and rammed.(2/3 of respective earth work)
237Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete.
2382.5cm A.S. flooring with C.C.(1:2:4) including punning with 12mm size chips.
2392.5cm D.P.C. with C.C.(1:2:4) using 12mm size chips.
240Cost of Single Pannel Door of size (1.0 mx2.0m) made out of M.S.Frame (35mmx35mmx5mm) with G.P.Sheet pannel of 1.20 mm thick and iron ventilator(size 0.45x0.30m) including fitting at site with all cost etc. complete as per direction of Engineer in charge.
241Colour washing two coats over 2 coats white washing with shell lime including cost of paint & labour etc complete.
242White wash two coats with shell lime
243Painting of red oxide primer for priming over iron work including cost of red oxide & labour etc complete.
244Painting two coats with enamel paint for priming over iron work including cost of paint & labour etc complete.
245Cost of pump chamber wiring with all cost of wiring materials, labour etc complete.
246Fitting of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing & all cost etc fitting & fixing of required nos. of HDPE Teee for outlet & shaddle & G.I. raiser, nipple for fitting of air valve, equal Tee etc. complete including conveyance of pipe from factory to work site & testing of pipe line etc complete as per direction of Engineer - in-charge.
247Labour charges for lowering & Instalation of 7.5HP submersible pump Sets including fitting and fixing of delivery pipe to motor,NR Valve, Sluice valve and other fitting materials including cutting, welding and etc. including transportation to project site and site clearance etc. complete as per the direction of the Engineer-incharge.
248Fabrication of special joint including cutting and welding of pipes out of M.S. pipe / 100mm dia G.I.pipe including welding charges etc. complete.
249Laying & fitting of ARV/BFV/GI weldless Tee
250Construction of outlet at Tank
251100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark.
252100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed company.
253100mm dia G.I.Socket(Medium duty) with ISI mark
254100mm dia G.I.Flange ( Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed company.
255Cost of 7.5 HP Submerssible Pumpset 900 LPM at head of 25 mtr
256Supply of 160 mm Ø HDPE. Pipe PE - 80 ( PN-4) to deliver water at highest counter in complete shape and handed over to Pani Panchayat Chairman or Secretary.
2572.5 sqmm submersible (3 core) flat cable
258200x100 mm dia M.S. T/W cap
259100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed company.
260100mm dia C.I.Sluice Valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed company.
261100 mm dia M.S, T/W Clamp (Pair)
262160mm HDPE elbow spigot design 6 Kg. of ISI mark
263150mm dia C.I. Butter Fly Valve BS:5155/15: Kirloskar or equivalent make13095-CI MOC Lever Operated PN-1.0 with ISI mark of reputed including all cost, conveyance, cess etc complete but excluding cost of GST (As per S/R 2022)
26450MM DIA Air release valve with saddle &Raiser pipe.The air release valve shall confirm to IS14845 with ISImark including all taxes &royality etc.
265Cost of 160 mm Ø HDPE Bend
266160X160X160 mm HDPE Tee spigot design 6 kg
267160 mm slipon flange
268Cost, supplying of 160mmx160mmx110mm dia Weldless G.I.Tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST
269160 MM HDPE Tail piece 160 mm long
270160mm HDPE End cap
271Cost of 6 mm dia PVC Insulated Steel Wire rope
2725/8 ' x3\\" Nut bolt F.T.
273⅛\\" thick Rubber Insertion
274Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 10 HP with 16 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp.
2754.0 mm PVC Single Core Copper Wire ISI mark of reputed Company.
276160mmX110mm HDPE Reducer
2773x10 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098(Pt-II) including cost of transportation to site.
278Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion.Drilling for 200 (8”) dia pipe: From 0 mtr. to 100th meters
279Labour for drilling a perfectly vertical bore hole of specified diameter (minimum 400 mm dia.) for a specified depth below ground level in alluvial soil strata by mud Rotary Rig drilling as required to suit the site condition as per the direction of Engineer in charge including use of own Rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of 200mm dia GI/PVC Pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. GI/PVC casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion.Drilling for 200 (8”) dia pipe: From 101st mtr. to 200th meters
280Supply of all Labour & T&P for lowering the following sizes of PVC Pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials.200mm dia PVC/GI Casing pipes
281Cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of Engineer-in-charge.
282Supplying all materials,Labour T & P for packing the bore with washed gravel size (P-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction Engineer-in-charge. (50m depth) =0.786 x (0.4² - 0.2²) x 50mtr = 4.716 say 4.7 cum
283Supply of all labour & T&P for logging the drilled hole for tube well from ground level to the lowest level of drilled hole and provide the report for preparation and planning of assembly lowering.
284Supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of Engg in charge(including Cost of Cement and bentonite)
285Labour charges for cutting Transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification
286Threading charges
2878\\" PVC bail plug
2888\\" PVC threaded end cap PN-10
289200mm x 12\\" long PVC shot piece
290200mm Ø Sch, 80 casing pipe
291Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 300 kg 9 M long PSC Pole with 55 Sqmm AAAC Conductor average span length 40mtr with ,11 KV \\"V\\" Cross arm, with required No.of 11 KV T & C Disc. Polymer Insulators in tension point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devices, Stay Set at Bending point & double stay at end point with 18 mm G.I.H.T.Stay, concreting of Stay with Anchor plate, guarding at Road crossings etc if required including cost of all materials, labour transportation,inspection & commissioning etc. complete.
292Construction and erection of 11 /0.4 KV, 25 KVA Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay with kitkat fuse , sand filling and metal spearding with M.S.Grill gate ,all Channel matrials should be G.I , 7 Nos earthing with chamber with 3mtr G.I pipe of 40mm dia with connecting of 25mmx 5mm G.I flat to all earthing including 25KVA BIS Leble-II Star rated Transformer confirming to RE Rules 1956, mounted on 2.44 Mtr. Long structure, supported in 300 kg 9 mtr long PSC pole,transformer hard channel & top channel made of 2.8 M long 100 X 50 X 6 mm G.I.Channel, Transformer belting on 2.80 M long 50mm X 50mm X 5 mm G.I.Angle, (all REC SPN Std.F-3) with all accessories like 3 pole 11 KV HG Fuse(F-5)& A.B.Switches(F-9) both mounted on 2.8 M long 75mm X 40mm X 6 mm G.I.Channel and supported by 1.0 M long 50 X 50 X 5 mm G.I.Angle, with 3 No. 11 KV Lightening Arrestors and Danger board at each Pole, Anti climbing Devices & all other necessary fittings i.e required size Nuts & Bolts, Brackets, Cable, Cable Sockets as per TPCOCL specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning as per specification of TPCODL etc complete.
29390 Deg. Cut point.
294Electrical installation with electrical materials such as PVC tape, Ampere tape, 7/20 PVC copper wire, 3/20 PVC copper wire, GI flexible conduite pipe, No. 6 GI wire, Copper cable socket, GI socket and flange and petty materials required for electrical installation.All materials should be as per IS
295Electrical earthing including all materials as per the direction of the Engineer-incharge Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58383716
AUTHORITY Government Departments
TENDER VALUE 1.19 Crore
LAST DATE 23-11-2026
Authority
Authority Name Orissa Lift Irrigation Corporation Limited
Work Description Tender for Installation And Energisation Of Talapada-I, Talapada-Ii, Teramanapur-Ii And Teramanapur-Iii T.W. Projects Under Kujanga Block In Jagatshinghpur District Under Ridf 2026-27
Basic Detail
Tender No BID ID NO. 20/Dt.31.10.26
Bidding Type Tender
Location
City Cuttack
State Odisha
Key Dates
Publish Date 05 Nov 2026
Submission Date 23 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 1.19 Crore
Tender Fee 11800
EMD 1.19 Lakhs
Exemption Available
Document List
68dc7d11-698b-4daf-91de-586ba90733c7.html
BOQ_618097.xls
DTCNFINAL20.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

68dc7d11-698b-4daf-91de-586ba90733c7.html

xls

BOQ_618097.xls

pdf

DTCNFINAL20.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender