Tender For Supply And Installation Of Purifier Unit And Its Accessories In Swimming Pool At Nit-Trichy.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Nov 2026
18 days left
EMD
38000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply And Installation Of Purifier Unit And Its Accessories In Swimming Pool At Nit-Trichy.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of V1200 Series Swimming Pool Sand Filter, comprising a heavy-duty bobbin-wound FRP vessel of approximately 1200 mm diameter, filtration area of 1.13 m², multiport valve, internal diffuser and lateral assembly, pressure gauge, drain arrangement and required accessories, suitable for a maximum operating pressure of 2.5 bar, complete with graded filter media of the manufacturer's recommended quantity (approximately 860 kg), including installation, testing and commissioning, complete as specified and as approved by the Engineer-in-Charge. Technical SpecificationsFilter Type: Sand Filter, Top-Mount ValveTank Material : Bobbin-wound Reinforced FibreglassMax. Flow Rate of each filter - 860 lpm/51.60 (Cum/hr)Filtration Area - 1.13 Sq.mMultiport Valve Connection - 2\\"/63 mmMax. Operating Pressure - 36 psi/2.5 BarMax Temperature - 43C/109FFilter Media Size : 0.5 - 0.8mmInstallation – IndoorFilter Position - Above GroundMake – EMAUX/Equivalent |
| 2 | Supply, installation, testing and commissioning of Asynchronous, two pole self-priming centrifugal swimming pool circulation pump, 4 HP, suitable for 400 V, 3-phase, 50 Hz electrical supply, complete with integrated strainer basket, corrosion-resistant pump casing and impeller, stainless steel shaft, mechanical seal, suitable electric motor, necessary unions, connectors, mounting arrangements and other required accessories, compatible to the V1200 Series sand filter. The pump shall be capable of delivering the required discharge at the specified total dynamic head without exceeding the permissible filtration flow rate of the filter. The item shall include all necessary electrical connections, testing and commissioning, complete as directed by the Engineer-in-Charge. The contractor shall submit the manufacturer's technical datasheet and pump performance curve for approval before supply. Technical SpecificationsType - Self-Priming Centrifugal Swimming Pool PumpMotor Rating - 4HPInput Power - 2.8 kWSupply: 400 V, 3-phase, 50/60 HzSuction/Discharge Connections: 2\\"/63 mmStrainer basket capacity - 5 LitresShaft and Mechanical Seal: Stainless Steel 316Protection Rating: IPX5Motor Insulation : Class BSelf-Priming Capacity: Up to 2.5 m above water levelProtection: Built-in thermal protection and overload protectionPower Supply - 3 PhaseOutput - 4 PoleMake: EMAUX/Equivalent |
| 3 | Supply of washed and graded silica sand (silex) filter media, of approved quality and particle-size grading suitable for the V1200 Series swimming pool sand filter, free from clay, silt, organic matter and other impurities, including delivery to site, loading, unloading and placement in the filter vessel as directed by the Engineer-in-Charge, complete in all respects as per the manufacturer's recommendations.8x32 - 2000Kg, 16x32 - 2000Kg |
| 4 | Providing and fixing PVC pipes of 10 K.G / Sqcm conforming to ISS including joining with proper adhesive with necessary fittings as directed by the Engineer -in- Charge. |
| 5 | 2 inch (63mm) PVC Pipe |
| 6 | 2 inch (63mm) PVC Tee |
| 7 | 2 inch (63mm) PVC Foot Valve |
| 8 | 2 inch (63mm) PVC L-Bow |
| 9 | 4\\" x 2\\" Push |
| 10 | 2 inch (63mm) PVC Valve |
| 11 | Supplying and providing a heavy-duty trolley fabricated from SS 304 grade stainless steel, suitable for swimming pool filtration and vacuum-cleaning equipment, with a minimum 25 × 25 mm square tubular frame of 1.2 mm thickness, stainless steel platform, four 100 mm diameter heavy-duty non-marking castor wheels (two with locking brakes), minimum load capacity of 100 kg, necessary mounting brackets, handles, fasteners and other required fittings, with smooth, polished and corrosion-resistant finish, complete in all respects and ready for use, excluding pump. All materials and workmanship shall be of good quality and suitable for wet swimming pool environments. |
| 12 | Supply, installation, testing and commissioning of a 1.5 HP centrifugal water pump, suitable for 230 V, single-phase, 50 Hz electrical supply, complete with electric motor, pump casing, impeller, shaft, mechanical seal, suction and delivery connections, base frame, necessary fasteners and accessories. The pump shall be suitable for continuous operation, with appropriate motor overload and short-circuit protection. The pump shall deliver the required discharge at the specified total head, as per the manufacturer's performance curve, complete in all respects as directed by the Engineer-in-Charge. |
| 13 | Supply of heavy-duty, flexible swimming pool vacuum hose made of UV-resistant, chemical-resistant and abrasion-resistant plastic material, corrugated construction, suitable for underwater pool cleaning and connection to the swimming pool vacuum head and filtration system. The hose shall have a nominal diameter of 38 mm (1½ inch), with compatible end cuffs/connectors at both ends, leak-proof connections and adequate flexibility to facilitate cleaning of the pool floor and walls. The hose shall be suitable for continuous contact with treated swimming pool water and shall be supplied in the required length, complete with all necessary accessories, as approved by the Engineer-in-Charge. |
| 14 | Supply of heavy-duty aluminium swimming pool vacuum cleaning head of 18-inch (approximately 450 mm) width, complete with replaceable brushes or wheels, suitable swivel hose connection compatible with the specified flexible swimming pool vacuum hose, and provision for attachment to a standard telescopic cleaning pole. The vacuum head shall be corrosion-resistant, suitable for use in treated swimming pool water, and designed for efficient removal of dirt and settled impurities from pool floors. The item shall be supplied complete with all necessary fittings and accessories, as approved by the Engineer-in-Charge. |
| 15 | Supply of a heavy-duty telescopic swimming pool cleaning handle, extendable up to approximately 4 metres, comprising two sliding sections, fabricated from corrosion-resistant aluminium or equivalent lightweight material, complete with a non-slip grip, secure locking mechanism and standard end fitting compatible with swimming pool vacuum heads, brushes and other cleaning accessories. The handle shall be sturdy, lightweight, corrosion-resistant and suitable for regular use in swimming pool maintenance, complete with all necessary fittings and accessories, as approved by the Engineer-in-Charge. |
| 16 | Supply of a basic swimming pool water testing kit for measuring pH value and free residual chlorine, comprising a colour comparator, suitable pH and chlorine testing reagents/tablets, colour comparison scale, test tubes or sample cells, and carrying case. The kit shall be suitable for routine testing of swimming pool water and shall provide clear, easily readable results within the manufacturer's specified testing range. The kit shall be supplied complete with all necessary accessories and initial reagents for testing, as approved by the Engineer-in-Charge. |
| 17 | Supply of Leaf Rake along with its accessories as directed by engineer incharge |
| 18 | Supply of 18\\" Curved wall brush along with its accessories as directed by engineer incharge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender