Tender For Renovation Of Security Department At Basement Of Main Building, Tmh, Parel - Civil Works
Tender Value
45.93 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
12 days left
EMD
91860
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Security Department At Basement Of Main Building, Tmh, Parel - Civil Works
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKFLOORING BREAKING:Dismantling carefully the existing damaged cracked serviceable tiles / slabs / clay tiles / marble slab / granite slab / Kota stone/ tandur stone / shahabad stone and all types of flooring in flooring etc. including removing the 20mm thick bedding of cement mortar stone grit or brick bat coba etc. at all floors & levels including disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 3 | CONCRETE BREAKING:Breaking of existing R.C.C including cutting rainforcement / concrete by chiselling at all level including scaffolding and staging and the work shall be carried out so as to cause minimum inconvenience to hospital activity including cost of all material , labour, tools etc. Disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. |
| 4 | PLASTER BREAKING :Labour charges only for removing existing damaged / cracked / loosened cement / neeru / rough casts and faced plaster or tile work with back coat at all floors and levels including cleaning the surfaces clear of all loose concrete/ mortar foreign materials, carting away the debris out of hospital premises including scaffolding raking out joints of brick / stone masonry haking concrete surfaces etc. complete with quantities to be executed as and when required and as directed by the engineer in charge. ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) |
| 5 | HALF BRICK WORK:Half brick masonry at all floow level using well burnt locally available bricks of approved quality in cement mortar 1:4 at all floors providing R.C.C. patti in 1:2:4 (105x75mm) 900mm ht. For full width wall including scaffolding raking out joints curing etc. complete all as directed by the engineer in charge. (a) In partition wall with RCC stiffners & as supports to kitchen platform, shelves, cupboards, flower bed etc. without M.S. rods ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level |
| 6 | Internal plastering with readymix cement mortor using factory manufactured premix / readymix of Roofit Mix of M/S Premiere floor to roof materials PVT Ltd / Easy Plast of M/S Walpast Product Pvt Ltd / Readiplast of M/S Ultratech cement Ltd /Sound Plast PMC -1/ of M/S Sound Buildcare Pvt Ltd / or other approved equivalent make having minimum composition of C : S : : 1 : 4 using fully treated dry well graded natural sand conforming to IS 383 having low rebound properties, low water demand for curing properties,apply over internal masonary applying as per manufacturer's specifications including scafolding, cleaning, curing and disposing off debrise out of hospital premises, etc.complete all as per directed by Engineer-in- Charge. (20mm thick) |
| 7 | BRICK BAT COBA :Providing water proof brick bat coba for filling in the depressions and sunken portions in toilet bathrooms W.C. drying area etc. at all floors and locations as per the specifications of specialized water proofing agencies and finishing the top surfaces even using c.m. 1:3 and approved water proofing compound 2% cement weight etc. complete all as directed by the engineer in charge.Note: The measurements shall be on cubic meter basis. No deductions shall be made for the areas occupied by w.c. pans and other fittings and fixtures ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) Depth from 9inch to 24inch thick |
| 8 | NAHANI TRAP:Providing and fixing 100mm dia CI heavy duty Nahani trap with brass C.P. dome type heavy duty jali all as approved make quality as specified and directed and with all necessary allied works. a) In sinks on way / two ways lead covered joints P.C.C. encasing with C.P. Jali 4” to 5” PVC nahani trapPVC Multipurposes trap |
| 9 | PANTRY PLATFORM :Providing and making of pantry platform with black cuddapah stone machine cut machine polish of size 760mm in width and 25-30mm thick with suitable length as required at site on single brick work partitions (pedestal) made bt 1st class burnt brick at required intervals in c.m. 1:4 plastering both sides neeru finish or cuddapah stone for vertical supports front so as to fix cuddapah facia strips cuddapah shelf at suitable ht. Or as per the site condition fixed in groove made in walls filling the same with c.m. and making the wall good to match the existing plaster facia strip size of required size all complete as per site condition or as directed. |
| 10 | S.S.SINK:Providing & fixing in position stainless steel sink with drain board or without drain board of Nirali make only resting over bracket with waste coupling including fabricating bracket from ‘B’ class G.I. pipe with necessary welding chessing in wall and fixing the sink in position with waste coupling, bottle trap all complete as per specified and directed by engineer in charge. 535mm x 460mm Big X 200mm |
| 11 | GRANITE: Providing and laying 18-20mm thick granite slab in required size and approved colour as per approved sample 1st quality for lift architraves / dado / flooring / sills / platform / sink / with all exposed edges machine cut double machine polished (mirror polish) laid over a bedding of cement mortar 1:3, 35mm thick in true plain curing finishing the joints making holes for wash basin / sinks coupling in slab if required etc. complete including making grooves in walls for fixing and making good the surface (excluding cuddapah platform) colours – Black/Red/Grey. ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) |
| 12 | CUDDAPAH :Providing & laying 25-30mm thick cuddapah stone slabs in platforms / sinks with all exposed edges machine cut double machine polished in true plane and level with matching cement paste curing finishing the joints neat etc. complete including making grooves in walls for fixing and making good the surfaces.making cutting for fixing waste cupling water inlets etc. ( disposing / taking away the debris outside the premises & disposing as per the guidlines of statutory authoritised. ) |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),/roff cement 8 to12 mm thick laid on existing tile & jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete as per direcetion of Engineer Incharge.Size of Tile 600x1200 mm |
| 14 | Providing and laying vitrified floor tiles/wall tile in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeSize of Tile 450x300 mm |
| 15 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 16 | E.W.C.:Providing and fixing european water closet suits wash down pattern best Indian make in white glazed vitreous of Hindware/Parry ware/cera with integral ‘P’ or ‘S’ trap as per approved make with left or right vent in position including fixing it on chair bracket or wall bracket with necessary C.P. brass screws & plugs etc. complete all as directed by the engineer in charge.Wall Mounted EWS \\"ULTRA\\" white colour |
| 17 | Bib tap fancy ( Plumber/ Jaquar) |
| 18 | Providing and fixing consealed flush tank will all accessaries including breaking /Chassing wall fxing flush tank and making the surface good |
| 19 | TOWEL ROD :Providing & fixing approved C.P. brass towel rods of size 600mm x 20mm heavy duty with a pair of C.P. brass brackets wall flanges etc. fixed to wall with C.P. screwed on the rawl plugs etc. complete as and when required and as directed by the engineer in charge.(approved make) (work includes removing old fixtures also) |
| 20 | SOAP DISPENSER :Providing C.P. brass heavy quality liquid soap dispense C.P. push type brass brackets caps etc. and fixing in position with brass screws including providing and fixing rawl plugs in the wall and redoing the walls etc. all complete.(Jaquar /Plumber make) (work includes removing old fixtures also) |
| 21 | Fancy Bib tap two in one Jaquar make Jaquar make (cat No.041) |
| 22 | Fancy angle stop cock ( Plumber/ Jaquar) |
| 23 | Fancy bathroom mixer ( hot & cold ) cock (ARK make , Seiko & Plumber make |
| 24 | Fancy mixer cock for wash basin (Plumber/ Jaquar /Grohe) |
| 25 | Providing and fixing Heavy duty C.P. Jaguar make other head shower with all necessary allied works as directed by Engineer-in - charge |
| 26 | Nahani trap JaliP.V.C. 4” |
| 27 | P.V.C. PIPES: Drain Line - Providing, laying, jointing, fitting testing heavy quality PVC pipes of Prince, Supreme etc. make & of required dia including all fittings required as per site requirement & laying the same at any floor levels including scaffolding all jointing materials & clamping in wooden blocks if required etc. complete as directed & specified by engineer in charge. |
| 28 | 110mm |
| 29 | Providing, laying, jointing, fitting & testing C PVC pipe SDR of heavy quality following dia for hot & cold water distribution system of approved make (Prince, finolex, Supreme, make) including all fittings required as per site requirement for concealed pipe laying by chasing in wall, floors and making good the same to the original condition and for open type of pipe laying and fixing in proper line & level with necessary PVC clamps wood packing etc. fixing the joints with proper solvent or threaded type fittings or press type fittings to make totally water proof joint with necessary testing etc. complete all as per specified and directed by Engineer in Charge. (work includes removing old fixtures also)20mm n.b. |
| 30 | GATE VALVE:Providing & fixing in position heavy pattern screw down gun metal gate valve G.G. leader make conforming to IS : 778 with hand wheels at top including testing for 10 KG/sq pressure with clean & potable water with a minimum testing duration of two hours etc. and rectification of leak if any and all as per specification and directed by engineer in charge.20mm n.b. |
| 31 | C.P. connector of required length / 1 feet & 2 feet |
| 32 | Hand spray with PVC connection Jaquar make ( 1 mtr.long) |
| 33 | CARPENTRY WORKProviding wood work with 1st class teak wood in frames for doors windows, ventilators, Air-condition frames, clear story window, false ceiling and partitions etc.wrought framed and fixed in position including applying one coat of approved wood primer to the exposed surfaces and tow coats of bitumastic paint to the surface of wood in contact with masonry/concrete etc.complete. |
| 34 | Providing and fixing cabinet made up of 19 mm. Commercial ply of approved make for top, bottom, sides and shelves and 8 mm thick commercial ply approved make for back side.Door shutter made up of 19mm thick commercial ply and All exposed surfaces including shelves for open type cabine should be laminated with 1.0mm thick approved plastic laminate sheet of required colour including all brass fittings such as hinges, tower bolts, ball catches, stopper, handle, knobs as per shown in drawing or approved by Engineer-In-Charge etc.and all exposed edges shiuld be 6mm thick lipping patti or PVD lipping patti matching with laminate finish, locking arrangement with Godrej multipurpose lock etc. All inside areas shall be .80mm thick approved colour laminate etc.all complete as specified and directed by Engineer-In-Charge.Cabinate with inner side 0.8 mm thick laminate ( White / Offwhite ) With shutter |
| 35 | Providing making and fixing in position counter consisting of top (all width 2inch-6 inch) made out of 25mm commercial ply of approved make supported on drawer unit of ht.2 inch -6 inch and vertical supports at regular internals as shown in drawing made out of 15mm thick approved commercial ply and the counter made above the table of required width and size with vertical divider all made out of 19mm thick approved commercial ply and 12mm thick approved commercial ply for front side of counter with approved laminate or 10mm teak wood lipping on all exposed edges and table top edges should be 1 ½ inch x1 ½ inch finishing with and approved colour and moulding plastic laminate 1.0mm thick for all exposed surface etc. all inside surface shall be 0.8mm thick approved laminate soft board of 12mm thick pasted with approved adhesive and covered with tepestery felt cloth of required colour including cost of all hardware like hinges, tower bolt, handles, knobs, computer ready-made keyboards, cable manager, CPU stand made by 19mm thick ply with approved laminate finish and locking arrangement with Godrej multipurpose lock etc. complete as specified and directed. |
| 36 | Providing & fixing in position Executive table mad out of fire retardant 19 mm thick Marine BWP (boiling water proof) plywood with table top of size 900 mm X 1600 mm finished with fire retardant 1mm thk laminate externally & internally with storage - drawers as per design. Table shall be provided with keyboard tray in 19mm thick marine BWP ply and fixed drawer units each having 3 number of drawers in 19mm plywood front fascia, 12 mm ply for sides and back, with 6 mm ply for base & finished with 1mm thick laminate externally and 1mm thick laminate internally and shall be supported on telescopic side mounted channels. The drawer unit shall have central locking arrangement & brush finish SS304 handles (100 mm) . CP teak wood 40mm X 100mm for foot rest. All exposed edges shall be finished with second class teak wood lipping with 2 to 3 coats of melamine polish/ deco paint to match the shade of laminate complete with necessary hardware, accessories, labour etc. Table shall have independent wire manager of standard size, Stainless steel finished hardware. The rate shall include cleaning, placing in position, etc. complete. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer. |
| 37 | Providing making and supplying computer table made out of 19mm thick approved commercial ply for table top, mounted on the vertical side support of 19mm thick ply and drawer unit cabinet with 12mm thick ply appron as shown in drawing. The drawer cabinet made out of 19mm commercial ply for sides, shelves and shutters and drawers mounting with heavy duty sliding channel with ready mode key board drawer with heavy sliding channels, all edges shall be lipped with 6mm thick T.W. lipping patti or PVC edge beading matching with laminate. All exposed faces should be 1.0mm thick laminate of approved colour and make, non laminated area should be 0.80 mm thick white / off white laminate including necessary hinges, handle, multuporpose lock, ball catch etc. as per drawing and as specified and directed by Engineer-In-Charge.Computer table with all inner surface with 0.8 mm thick approved laminate |
| 38 | Providing, fabricating and making working / writing table of required size as shown in drawing. Table top 600 mm.width consisting of 19mm thick commercial ply of approved make resting over vertical supportsof 19mm thick approved commercial plywood required intervals as shown in drawing, including drawer unit all expossed edges should be lipped with 6mm thick lipping patti and all exposed surfaces should be laminated with 1.0mm thick plastic laminate of approved make and shade non-laminated area should be polished with 2 coats of french polish legs if required to be made out of 2 inch x 2 inchT.W. for required height. Including all necessary fittings for drawer unit as per drawing like C.P.brass/S.S.hinges of approved Archies make, Godrej multi purposes lock, tower bolt, ball catches and C.type powder coated handle etc. complete all as specified and directed by Engineer-In-Charge. |
| 39 | Providing and fixing aluminium partition frame made of extruded aluminium section of size 50mm x 50mm of heavy duty make . Fixing the partition to proper line plane level and plumb. Aligning the complete aluminium framework in proper worksmanship and fixing with all necessary screws, aluminium cleats and nails as required. Work includes transportation of material at site carpentary tools taxes and levies |
| 40 | Providing and fixing approved quality machine pressed phenol formal dehy de bonded commercial/marine ply wood of approved size and fixing the same with necessary nails/screws/adhesive in partition cupboard shelves/ktichen/cabinets/flush doors etc. at all floors and locations in quantities as required at site in following thickness including 6 mm thick T.W.lipping patti at all exposed edges with nails/screws/hardwares/adhesive wastage in cutting, transportation etc. complete all as directed by the Engineer-In-Charge.Commercial ply |
| 41 | 6mm thick ply |
| 42 | 12mm thick ply |
| 43 | Providing and fixing 1.0mm thick approved make laminate of required colour over existing surfaces along with the adhesive all as required specification design etc. complete as specified and directed by Engineer-In-Charge.1.00 mm thick |
| 44 | Providing and fixing ordinary plain/frosted/Bajra self design sheet glass of approved make of following thickness in various sizes as required at site fixed to windows/louvers, partitions, vision panels door etc. using first class oil putty of approved quality and make including labour charges for fixing glazing pins teakwood or aluminium beading with necessary screws nails etc. at all floors and locations including cutting the glass to required size removing the existing broken/damaged glass panel window/doors/partitions etc. along with its old oil putty beading etc. and disposing off the unsericeable material including wastage in cutting, transportatiion etc. complete. all as directed by the Engineer-In-Charge.Plain ordinary sheet glasses. |
| 45 | 5mm thick |
| 46 | 8mm thick ( with machine edge polish) |
| 47 | Labour charge for making round or rectangular hole to existing glass of any thickness in addition to Item No. 45 as per site requirement and smoothing the edges etc. complete all as specified and directed by the Engineer-In-Charge. |
| 48 | Sun control film of any design & Colour & approved make |
| 49 | Labour charge only for removing and re-fixing available door shutter / window frame with necessary modification including cutting the existing shutter providing leeping patti all around the shutter if required including removing and refixing availbale old hinges, mortice lock, tower bolts ect. fixing aligning the door shutter in proper plumb and level etc. complete all as per specified and directed by Engineer-In-ChargeRemoving and refixing door shutter |
| 50 | Providing and fixing 12mm thick soft board pasted with approved adhesive and covered with tepestary felt cloth (Jute fibre) of required colour including removing old soft board if necessary and refixing etc. complete as specified and directed.Soft board with felt cloth |
| 51 | Providing and fixing alumimium partition to the required height partly glazed and partly panneled or fully glazed or fully panneled using aluminium section ofapproved make heavy quality section 3\\" x1½ \\" / or of various section lesser than mentioned size as approved by EIC. The Aluminium section shall be of Satin finish anodizing of required size for bottom, top, middle and vertical rails at required intervals panneling with 12mm thick nova pan or ancholam both side pre-laminatd board fixed with sloping aluminium beading alround with neoprine gasket glazing with 5.5mm forsted/ bajri/ plain glass of approved make like M/s.Triveni, Shri.Vallabh/J/A/G pilkinten fixed with alumimium channel beading two way PVC lining/ rubber gasket to ensure water tightness and no rattaling including providing necessary cover mould using suitable alumimium section so as to take care of gaps between the walls/ ceiling / flooring and partitions etc. including providing and fixing necessary fittings as specified and directed.With powder coated partitions - fully panned |
| 52 | Providing and fixing sliding door to consist of partly glazed panneled / fully panneled / fully glazed with using 5.5mm thick glass sheet of approved make and quality plain/ forsted / bajri glass of approved make M/S. Triveni/Shri. Vallabh/J/A/J pilkinten fixed with aluminium slopping channel beading with two nay PVC lining/rubber gasket to ensure water tightness and no rattaling and panneling with 12mm thick nova pan or ancholam board prelami rated on both side as required 15 section, guiding rail section 2635, vertical rails section 4506 including providing PVC Guidrails of six 12mm x75mm as required at size concealed type locking arrangement with Laxmi of Gold make lock and heavy duty handle set as per requirement including providing and fixing pelmet of 18mm thick commercial ply of kitply/Mysor/Century/Anchor make with approved laminate of 1.5mm thick and teak wood lipping patti and non-laminated surfaces should be polished with approved french polish at required shade and colour.With powder coating -partly glazed partly panned |
| 53 | Acostic pannelProviding and fixing in position Acoustic Polyethylene Terephthalate Tech-Panel (Colour and Design as approved) made from compressed polyester Fibre of 10mm thickness, 1800-2000 GSM Density. The Polyethylene Terephthalate Panel should be Highly resistance to humidity (RH:99%), water vapour diffusion resistance (as per ISO-12572-2016 standards), zero mold growth (as per EN-15101-1 standards), Highly versatile and (Class A) flame retardant (as per BS-3119 standards, IS-15061 standards) and Thermal conductivity (as per EN12667 standards), The product should have an acoustical performance of 0.80 NRC. The Panel should be fixed on Aluminium framework of 50mm x 25mm x1.5mm fixed with Angular Cleats and spaced at distance of 600x600mm center to center, The wall should be treated with suitable sound dampening membrane. The frame should have infill of 50mm Polysynth. The framework should be finished with 12mm Marine-ply as per IS 710 standard having 22 to 25mm perforations. The exposed surface of the ply should be treated with Fruedenberg acoustic membrane and then the final finishing material of 10mm Polyethylene Terephthalate panel by using Insta-Bond Standard adhesive. The paneling shall be finished as per the design, sizes, colour, cut-outs, joints and all other elements as directed by Engineer in Charge. The entire system to be installed by skilled labour as directed by Engineer in Charge. |
| 54 | Providing and fixing in position Acoustic Polyethylene Terephthalate Tech-Panel (PET Wooden Printed), made from compressed polyester Fibre of 10mm thickness, 1800-2000 GSM Density. The Polyethylene Terephthalate Panel should be Highly resistance to humidity (RH:99%), water vapour diffusion resistance (as per ISO-12572-2016 standards), zero mold growth (as per EN-15101-1 standards), Highly versatile and (Class A) flame retardant (as per BS-3119 standards, IS-15061 standards) and Thermal conductivity (as per EN12667 standards), The product should have an acoustical performance of 0.80 NRC. The paneling shall be finished as per the design, sizes, colour, cut-outs, joints and all other elements all as per specification and directed by Engineer in Charge. Indosonic/Anutuone/Armstrong) |
| 55 | Acoustic Doors Designing, fabricating, testing, installing and fixing in position 100 mm thick acoustic fire door( having 2 shutters) with seasoned Hardwood frame size 100x75mm with rebate of required size. Shutter of 75mm thickness to be made using frame of 34x100mm section of chemically treated seasoned wood. All wood work shall be treated as termite free. 12 mm thick commercial plywood of Approved make with 01 mm thick lamination with suitable adhesive and shade shall be fixed over and infill cavity shall be filled with acoustic polywool and STC insulation material of 4mm thick MLV Sheet. Periphery of shutter to be covered with 12mm thick teak wood lipping. Weather seal to be fixed on frame of door to fill the gap of shutter and wooden frame (chowkat). Dropdown seal to be fixed in shutter to block gap with floor when door is closed. The design should Include all Hardware fittings like Heavy duty SS hinges of suitable size,600 mm long CP brass H type Handles, 300 mm long brass Tower bolts, consealed pelmet type door closers, locking arrangement etc complete all as specified and directed by Engineer In Charge |
| 56 | Providing and fixing door closer of Everite/Hyper make confirming to is 3564 (left or right) to the existing door shutter including cost of all other materials labour etc. all complete as specified and directed.Door closer No.2 Everite /hyper / TECMA |
| 57 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shuttersDoor shutters with locking arrangement 4 lever mortice lock with handle set of approved make. |
| 58 | 35 mm thick |
| 59 | 30mm thick |
| 60 | Providing and fixing in position suspended false ceiling system using 600x600 mm material fibre reinforced factory applied vinyl painted \\"ARMSTRONG\\" ceiling tiles (Armstrong ceiling systems) Tiles having 16/15 mm thick, and approved surface design and edge profile ( TEGULAR or equivalent) place in a suspended grid of size of 600 x 600 mm made of hot- dipped G.I. steel sections having an exposed surface capping of pre-finished bake polyester painted caoil wherein the main tee of size 24mm x 32 mm shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjustments. The cross tees of size 24x27x1200mm shall be inserted in to slots between the main tees at 600mm centres and thereafter in direction vertical to the longer tees , cross tees of size 24mm x 24mm including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per EIC. The maint tees to be suspended from the ceiling/soffit with the help of metal dash fastners of 6mm x 50mm ,soffit clits of 25mm x 35 x 1.60mm and 4m dia G.I wire with galvanised spring steel levelling clips. the entire grid system shall be designed to bear a disturbuted load of minimum 15kg/sqm (only Armstrong false ceiling area will be measured for the purpose of payment)ARMSTRONG tile models of 'ELITE-16mm/' Fine Fissured - 16mm/Classic Lite-15mm'or other approval |
| 61 | Providing and Fixing new Gypsum board false ceiling with GI frame work including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per EIC. |
| 62 | KEYS HOLDING CABINET: cabinet providing and fixing Key board made out of 1 ½ inchx2 inch thick teak wood frame with 12mm thick ply of approved make for back fixing ½ inch Dia brass C.P. cup hook at required spacing on back ply. Door shutters single or double leaf consisting of 1 ½ inch x2 inch thick T.W. frame with 5.00 mm thick clear glass fixing with T.W.bedding patties from both sides and fixing with brass hinges of required size with necessary ball catch, acrylic knons of 1inch dia locking arrangement with godrej multi purpose lock, 2 inch brass tower bolts in case of double shutter including french polish of 2 coats of required shade all over wood surface including providing necessary wall mounting hardware etc. all complete as specified and directed to the satisfaction of Engineer-In-Charge. |
| 63 | Providing and fabricating and fixing drawers at required place of required height with sliding M.S.chromium plated/oxidized heavy duty Sliding channels, 1.0mm thick approved laminate for front side of drawer and balance area should be franch polishing, including all necessary fitting like powder coated handle, Godrej multi purpose lock etc. complete.Working table drawer. (size 0.60 mm x0.60 mm approx plan area) |
| 64 | PAINTINGProviding and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 65 | Providing & applying one / two coats of primer two coats of paint as mentioned below of approved make First quality Asian Paints (Apcolite) / Nerolac / Dulux to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions, doors etc. including removing existing paints , nails , screws , battens etc. and thoroughly scrapping the surface with sand papers filling up crevices and levelling with putty of Asian make necessary to obtain smooth surface ie. complete surface preparation etc. complete as directed to the entire satisfaction of Engineer In-charge.With one coat of primer and two coats of paint Using Luster paint |
| 66 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats (new work) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender