Tender For Proposed Construction Of Union Room Of Pvks Office Beside Central Store In The Jadavpur University Main Campus.
Tender Value
5.09 Lakhs
Estimated cost
Bid Submission
17 Nov 2026
11 days left
EMD
12000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Construction Of Union Room Of Pvks Office Beside Central Store In The Jadavpur University Main Campus.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed ………. water as required complete. (a) Depth of excavation not exceeding 1,500 mm.Section- A, Item-2,a |
| 2 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.Section- C, Item-5,a |
| 3 | Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and (Payment will be made on profile measurement beforedressing complete. and after the work (a) With earth obtained by fresh excavation upto 1800 mm. depth (including the cost of excavation from land arranged by the Deptt. within a lead of 100 m.)Section- A, Item-5,a |
| 4 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, …… completion of works (upto roof of ground floor) a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.Section- C, Item-36,a |
| 5 | Reinforcement for reinforced concrete work in all sorts initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and , placing in proper position and binding with 16 gauge black annealed wire at of structures including distribution bars, stirrups, binders etc …. bending to correct shape ….. every intersection, complete as per drawing and direction. (i) Tor steel/Mild Steel.Section- C, Item-15,a/i |
| 6 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety.Section- C, Item-5,a |
| 7 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.Section-B, Item-10 |
| 8 | Plaster (to wall, floor, ceiling etc.) with sand and and raking out joints including throating, nosing and [Excluding cost of chipping over concrete surface] cement mortar including rounding off or chamfering corners as directed …. drip course, scaffolding/staging where necessary (1st floor). (ii) With 1:4 cement mortar (a) 20 mm thick plasterSection-I, Item-1,ii,a |
| 9 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.Section- C, A Item -1 |
| 10 | Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation (b) 1:4:8 proportion Section- C, B Item -1/b |
| 11 | Welding in M.S. structural work with gas or electric: (a) Tack weld Section- F,b Item-2,a/b |
| 12 | (b) Continuous weldSection- F,b Item-2,a/b |
| 13 | M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. Section- F, Item-8 |
| 14 | Supplying 1.5mm thick M.S. sheet fitted and fixed on respect as per design including cost of all labour and materials.Section- F, Item-15 |
| 15 | Supplying , fitting & fixing Zn -Al alloy (55% Al & 45% Zn) coated ( followed by colour coated ) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal….With 0.50mm thick sheet.(Item no. 15 Page no. 77) |
| 16 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (ii)Grill weighing above 16 Kg./sq.mtr and upto 16kg/Sqm.Section F, Item-13,ii |
| 17 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the damages complete.(a) Upto area 2.5 Sq.m Section G- Item 72,a |
| 18 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vi) 100mm. X 50mm. X 1.25mm.Section- G,Item -D-5,vi |
| 19 | Iron socket bolt of approved quality fitted and fixed complete (b) 100mm long x 10mm dia boltSection- G,Item -D-8,b |
| 20 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (b) 250mm long. Section-G, Item-27,b |
| 21 | Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well .... other fittings in ground floor. (a) 35mm thick shutters (single leaf)Section G, B, Item-12,a |
| 22 | (A) Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals) (ii) Sal : Local. Section G, C, Item-1,ii |
| 23 | Supplying, fitting and fixing in position fibre glass panes of approved 6 m height for external wall) c) 2.0 mm thick (3.36 Kg/Sq.m)Section L- Item-2,ii |
| 24 | PVC 26 Door Shutter-37 mm thick: Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C.multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, …… tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. In ground floor.PCS [Item26 page-134] |
| 25 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size weather seal to be provided through out the frame. The door frame shall be fixed…... with the wall using and minimum 2 Nos for horizontal member etc. complete as per Manufacturer‟s 65/100 mm M.S. Screws through the specification and direction of Engineer-in-Charge.PCS [Item27 page-134] |
| 26 | Supplying, fitting & fixing 1st quality Ceramic tiles ....necessary or by synthetic adhesive & grout materials etc.(A) Floora) Area of each tile above 0.09 Sq.m(i) Coloured decorativeSection- D,Item -35 |
| 27 | (B) Wall(a) Area of each tile above 0.09 Sq.m(i) Coloured decorativeSection- D,Item -35 |
| 28 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement all materials and In 3rd floor.(Add extra @1.5% for each addl. floor upto 4th floor)labour. item isnot permitted with ordinary cement). Using grey cement (ii) 25 mm. thickSection- D, Item-6,ii |
| 29 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.Section-K, Item-1,a/b |
| 30 | (b) Priming one coat on plaster or other wooden surface with synthetic oil bound primer of approved quality Section-K, Item-1,a/b |
| 31 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface etc. on the surface, if necessary :(a) On timber or plastered surface :With super gloss of approved quality-(iv) Two coats (with any shade except white)Section-K, Item-2,a,b |
| 32 | (b) On steel or other metal surface :With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white)Section-K, Item-2,a,b |
| 33 | Acrylic Distemper to interior wall, ceiling with a coat of (as per manufacturer's specification) solvent based interior grade acrylic primer including cleaning and smoothning of surface. Two CoatsSection- J, Item-10 |
| 34 | Reparing collapsible gate by cutting out all rivets as necessary reassambling all members including welding pieces of channels, sraightening bent bars and rivetting with new rivets and position and painting two coats.fitting inSection- F, B Item-07 |
| 35 | b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]Section- F, Item-20,b |
| 36 | (iv) Two point nose steel handle including fitting and fixing.Section- F, Item-20,iv |
| 37 | (vii) Aluminium peg stay 300 mm long including fitting and fixingSection- F, Item-20,vii |
| 38 | Asbestos corrugated (Trafford or similar approved quality) sheet (6 mm thick) work (excluding the supporting framework) fitted and fixed with 9.5mm. dia. J or L hook-bolt and nuts, limpet and bitumen washers and putty with 150 mm end lap & one corrugation minimum side lap complete. (Payment should be made on area of finished work)(a) In roofSection- E, Item-7 |
| 39 | Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430/1510 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 4 mm thick High Pressure Steam Cured Non a) False Ceiling (with 4mm thick Pearl Designer Fibre Cement Board and E-GridT-2430/1510).Section-G, Item-F-3,A |
| 40 | Prividing & laying plastic cotated bituminiousfelt with necessary requirement including labour at GI or Asbestors roof. |
| 41 | Supplying fitting and fixing …Anglo-Indian w.c in white vitreaus ………….. Nuts etc.(a) with 'P' TrapPCS Sanitory / Page - 79, Item - 3 |
| 42 | Supplying fitting & fixing closet seat of approved make with …………….. Complete.(b) Anglo Indian (ii) Plastic whitePCS Sanitory / Page - 81, Item - 10 |
| 43 | Supplying fitting and fixing 10 liter P.V.C low-down cistern of ……. coats of painting to bracket etc.PCS Sanitory / Page - 36, Item - 2 |
| 44 | S.F& F bibcock or stop cock(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mmPCS Sanitory / Page - 6, Item - 7 |
| 45 | S.F.& F shower rose of approved brand…..(g) PTMT overhead shower ( Prayag or equivalent )(i) 75 mm roundPCS Sanitory / Page - 3, Item - 3 |
| 46 | S.F.& F best quality Indian make mirror 5.5mm thick …550mm X 400mmPCS Sanitory / Page - 82, Item - 19 |
| 47 | S.F & F soap holder. b) Fibre glassPCS Sanitory / Page - 82, Item - 18 |
| 48 | S.F.& F Towel rail with two bracketsa) C.P.over brassi) 25mm dia & 600 mm longPCS Sanitory / Page - 82, Item - 22 |
| 49 | S.F&F white vitreous china best quality approved make wash basin with C.I ……… approved paint.(ii) 550mm x400mm sizePCS Sanitory / Page - 7941, Item - 2 |
| 50 | Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming(i) CPVC Pipes Class-1, SDR-1115mmPCS Sanitory / Page - 29, Item - 1 |
| 51 | 20mmPCS Sanitory / Page - 29, Item - 1 |
| 52 | Supply of UPVC pipes…..A) Single socketed 3 Meter Lengthb) 110mmPCS Sanitory / Page - 68, Item - 23 |
| 53 | B) Fittings (iii) Door Tee(b) 110mm |
| 54 | xi) Door Bend (TS) (110mm)PCS Sanitory / Page - 68, Item - 23 |
| 55 | xvi) Pipe clip (b)110mmPCS Sanitory / Page - 68, Item - 23 |
| 56 | xxi) 110 X 110 P-Trap 75 mmPCS Sanitory / Page - 68, Item - 23 |
| 57 | xviii) W.C.Connectr(450mm long)PCS Sanitory / Page - 68, Item - 23 |
| 58 | Supplying, fitting and fixing PTMT Smart Shelf of approved make of size 300 mm.PCS Sanitory / Page - 82, Item - 21 |
| 59 | Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polishedPCS Sanitory / Page - 81, Item - 13 |
| 60 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.i) Polythene Flush PipePCS Sanitory / Page - 81, Item -11,a |
| 61 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mmPCS Sanitory / Page - 80, Item -6,i |
| 62 | Cutting trench upto 1.00 metre deep through masonry foundationPCS Sanitory / Page - 97, C Item -3 |
| 63 | Supplying, fitting and fixing pillar cock of approved make. b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent).PCS Sanitory / Page - 45, Item -19,b |
| 64 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. iii) 900 mm longPCS Sanitory / Page - 43, Item -10,iii |
| 65 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.v) 900 mm long eachPCS Sanitory / Page - 43, Item -9,v |
| 66 | Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and at bottom and sides).refilling (but excluding concreting)(ii) 225 mmPCS Sanitory / Page - 66-67, Item -16,ii-iii |
| 67 | (iii) 150 mmPCS Sanitory / Page - 66-67, Item -16,ii-iii |
| 68 | Supplying, fitting and fixing yard gully with approved H.C.I. Grating complete. i) 225 mm X 150 mm with 230 mm gratings Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender