Tender For Construction Of Jalasatra (Stand Alone) At Belepara Bus Stand Under Kamarpukur Gram Panchayat Within Goghat-Il Development Block In The Hooghly District.
Tender Value
14.65 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
12 days left
EMD
29320
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hooghly → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Jalasatra (Stand Alone) At Belepara Bus Stand Under Kamarpukur Gram Panchayat Within Goghat-Il Development Block In The Hooghly District.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 4 | 400 G polythene sheet |
| 5 | Brick Work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement Mortar 1:6 (1 cement : 6 coarse sand). |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforced - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 9 | Steel reinforced for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated (TMT) bars of grade Fe-500D or more. |
| 10 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge:60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. |
| 11 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.Granite Stone slab of colour black, Cherry/Ruby red Area of slab upto 0.50 sqm |
| 12 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including trenching and refilling etc. 15 mm dia nominal bore |
| 13 | 25 mm dia nominal bore |
| 14 | 40 mm dia nominal bore |
| 15 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 16 | 20 mm nominal bore |
| 17 | Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg |
| 18 | Providinging and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore |
| 19 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @3.84kg/10 sqm) |
| 20 | Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 21 | Providing and fixing in position collapsible steel shutters with verical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom tail of T-iron 40x40x6 mm, with 40mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 23 | Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 24 | Labour for boring/drilling of bore well of required dia meter by water jet system through any type of soil strata including hire and lanour charges for boring pipes, scaffolding, tools & plants, as necessary and taking out them and lowering pipes, strainers, blank pipes etc. and fitting & fixing the same complete including other incidental works as per direction of EIC. The tube well should have a minimum 50 mm gap in between the outside of the tube well pipe and the bore.B) (i) boring for 100 mm dia top enlargement |
| 25 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer in-charge. |
| 26 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including trenching and refilling etc.32 mm dia nominal bore |
| 27 | Sub Total |
| 28 | Amount after GST Correction Multiplying Factor @ 0.973 |
| 29 | Add Cost Index 9% |
| 30 | Sub Total |
| 31 | Supply, fitting, fixing electrical worksPump motor set |
| 32 | Supplying, fitting and fixing steel cutter piece of approved make conforming to I.S. specifications. a) a) 100 mm dia |
| 33 | Supplying, fitting and fixing plug of approved make conforming to I.S. specificationsa) 100 mm dia. |
| 34 | Supplying, fitting and fixing 100 mm M.S. housing clamp of approved quality. |
| 35 | Submersible Pump Set (CPWD Market Rate) : Supply, Installation & commissioning of electrically operated 220 V 1.0 HP submersible pump including necessary cable upto 60 mtr. Lowering it with chain pully of required depth, including fitting, fixing and lowering of GI coloumn pipe (excluding cost of coloumn pipe) of required depth, anchoring for keeping pump vertically etc. all complete as per direction of EIC. |
| 36 | Electrical Accessories (CPWD Market Rate) : Cubical type motor starter pannel from 14 SWG, CRCA sheet having 1 Nos. 32 Amps 220V DP MCB suitable range. Ammeter, Voltmeter (0-300) indicating lamp, DOL strater suitable capacity capacitor for single phase motor with provision of over load relay with start push buttons and suitable overload relay of complete set. |
| 37 | Piping Work (CPWD Market Rate) : Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI pipes as per IS : 1239 (part_1) a) 100 mm dia |
| 38 | Washing and development of tube well with air compressor pump and engine for 8 hours continuous pumping per day with necessary arrangement for testing yield including hire and labour for tools and plants and scaffolding as required complete in all respect as per direction of E.I.C. |
| 39 | Strainer Work (CPWD Market Rate) : Supply PVC strainer of approved make with adapter conforming to I.S. specifications . a) 100 mm dia . |
| 40 | Water Testing (CPWD Market Rate) : Collection of water samples for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charge for tools and plants and sterilising the equipment, paying all charges and fees, testing etc. complete in all aspect as per direction. |
| 41 | Roofing Work (CPWD Market Rate) : Roofing of Raniganj pattern clay tile 1st class quality (excluding supporting frame work) including tying eaves tiles with galvanised wire and painting all joints with (a)Valamoid or similar bituminous paste as approved. |
| 42 | Drainage Work (CPWD Market Rate) : Construction of surface drain (for T/W) 300 mm wide overall 75 mm deep with cement concrete base stone chips over a single layer brick flat soiling with a 75 mm thick sand filling and 10 mm thick cement plaster with neat cement finish to exposed surface etc. complete. |
| 43 | Well Work (CPWD Market Rate) : RCC well ring made with cement concrete 1:1.5:3 with stone chips and 0.80% reinforcement (including the cost of shuttering and reinforcement) cast at site fitted and fixed in position after proper curing true to plumb in the well including jointing with cement mortar 1:2 complete as per direction. a) 65 mm thick and 0.9 m internal dia. |
| 44 | Sanitary Equipment (CPWD Market Rate) : Supply & installation of water cooler cum purifier of water storage capacity 120 litre, three faucets one normal & two cold mode. (Aquaguard/equivalent). |
| 45 | Sub Total |
| 46 | GST 18% |
| 47 | CESS 1% |
| 48 | Sub Total Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender