Housing Urban and Rular Development Local Bodies Closing in 1 days TDR #58382964

Tender For Construction Of Community Hall Type 1 @ Sanrorpalayam In Cuddalore O.T Panchayat

Issued by Local Bodies · Cuddalore, Tamil Nadu
Tender Value
55 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
1 days left
EMD
55000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cuddalore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Community Hall Type 1 @ Sanrorpalayam In Cuddalore O.T Panchayat

BOQ

Name of Work:- CONSTRUCTION OF COMMUNITY HALL TYPE 1 @ SANRORPALAYAM IN CUDDALORE O.T PANCHAYAT
Sl. No. Item Description
1Earth work excavation and depositing on banks with initial lead and lift in gravelly soil stiff clay, hard stiff clay, murram, boulders mixed with gravel as per SS 20-B for foundation.
2Filling River Sand including cost and conveyance loading unloading from approved quarry to work site and labour charges for filling, ramming, etc. complete
3Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance, labour charges etc.
4Brick work in CM 1:5 mix using country Bricks including cost and conveyance labour charges etc.
5Super Structure
6Brick work in CM 1:5 mix using country Bricks including cost and conveyance labour charges etc. Super Structure
7Supply and errecting sheet centering of size 90 cm x 60cm 10 G sheet laid over silver oak joist and supported by casurina post of size 10 cm x 13 cm dia spaced at 75 cm center to center etc. complete Above Basement
8Supply and fabrication of steel for RCC works including cost and conveyance charges etc
9RCC 1 :1.5 : 3 mix using 20mm ISS HBG metal including cost and conveyance of all materials but excluding centering charges including labour charges for mixing laying concrete etc., complete
10Above Basement
11Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining,curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
12Providing and applying 20 mm thick Cement plaster in Cement mortar 1:3 ( One part of Cement and Three parts of Sand ),to finishing the exposed surfaces of R.C.C. items of works such as Roof (or) floor slabs, beams,and Sun shades etc.to correct plane and level including scaffolding, hacking of surface,chiselling the undulated surface wherever necessary and curing etc.,all materials and labour complete in all respects including all lead,lift and descent and as directed by the Enineer in charge.This rate includes the cost of providing Cement Mortar beadings for sun shades, steps,landing slabs,elevation etc.complete complying with standard specifications. Ceiling Plastering
13Supplyingandapplyingof twocoatsofputtyof3mmthickovertheexposedRCCsurfaceof ceiling includingfinishingthejointssmoothy with grinding machine and the surface shall bethoroughlycleanedoutofdustandscrubbing.TheSurfaceshallthenbeallowedtodryforatleast48hours.Itshall thenbesandpapered(waterproofabrasivesheet)togiveasmoothandevensurface. Anyunevenness shall bemadegoodbyapplying1stcoat of puttymixedwithwater on theentiresurface includingfillinguptheundulationsandapplying2ndcoatofputtyafter6hoursof 1st coat of puttyandthensandpapering(waterproofabrasivesheet)thesameafter it isdryandfinishingthesurfacesmoothly,etc., completecomplyingwithstandardspecificationsandas directedby theDepartmental Officers. [The rates areinclusiveofhirechargesforgrindingmachinewithwheel,costofsand paper (waterproof abrasive sheet), cost of putty blade,labour charges for grinding the joints andsandpapering, twocoat of putty, scrapping the putty area to level the surfacesmooth, etc., complete]. ThePuttyshouldbegot approvedbythe Executive Engineer before use on work
14PlasteringinCM1:5,12mmthickincludingcostandconveyancecharges etc.,
15Plastering in CM 1:3 20mm thick including cost and conveyance of all materials and labour charges etc. complete
16Paving the floorwithVertified tiles of size600x600x8mmlaidover20mmthickcementmortar1:3(OneCement andThreeMsand) basemortarovertheexistingfloor includingcuttingthetilestotherequiredsizewithspecialcutterwherevernecessary,laying inpositionandpointingwithwhite cementmixedwithcolouring pigment at the rate of 0.3Kg./sq.m. etc., completecomplyingwithstandardspecification. (Themakeandbrandofthe tiles shouldbegot approvedbyExecutiveEngineerbeforeuse on works)
17Floor finishingwithCeramic tilesof size305x305x6mmcolourtileswithdesign laid incementmortar1:3using20mmthickandpointingwithsame colour cement of 3kg includingcostandconveyanceofallmaterialstositeandall labourchargesetccomplete.
18Supply of the following steel doors, windows and ventilators to Office, etc. complete Main Door - D
19Door - D1
20Door - D2 pvc door
21Window - W
22Window - W1
23Ventilator
24Ventilator
25Supply of the following PVC pipes and PVC specials etc. complete For Seewage Line and Rainwater Down Fall Pipe with necessary bend ,shoes and clamp and labour charges etc complete
26Filling 40mm ISS HBG metal etc. complete
27Filling 20mm ISS HBG metal etc. complete
28Supply of Manhole cover 60cm x 60 cm 2 Nos.
29Painting Two Coats of OIL Bound Distember of approved colour over one Primer Coat including cost of Paint and labour charges etc complete
30Painting Two Coats of OIL Bound Distember of approved colour over one Primer Coat including cost of Paint and labour charges etc complete
31Painting two coats with ready mixed paint including cost and conveyance charges etc.
32Fixing Charges for Steel Door in Position etc complete
33Supply and Fixing of Cudapah Slab of 25mm/40mm thick including cost and conveyance of all materials and labour charges etc complete
34Fixing Charges for Steel Windows in Position etc complete
35Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor of 1100 v Grade in suitable PVC Rigid Pipe on wall and ceiling with PVC accesseries with TW box 150 mm x 100 mm x 113 mm for 5 A 3 Pin non inter locking cs plug with painting of suitable colour with contionues earth wire connection of 14 SWG TC Wire for PVC PLUG Point S D N o 34
36Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor of 1100 v Grade in suitable PVC Rigid Pipe on wall and ceiling with PVC accesseries with TW Switch box with 5 A F . T . Switch with painting of suitable colour for OPEN PVC Light Point and Fan Point ( For Eloctronic Regulator ) S D N o 18
37Supply and Fixing of 18 W CFL in the existing light point
38Supply and fixing of 32 A DPIC Switch of 500 v with F & N ( Side Handle ) on suitable T W Box with PWD Earthing ( S D N o 137 )
39Supply and Run of 2 of 6 sqmm ( 84 / 0.3 ) PVC insulated single core unsheathed Copper Conductor of 1100 v Grade on 7 / 20 G I Bearer wire for Service Connection Mains ( S D No 64 )
40Supply and Delivery of G.M.Gate valve 65mm size
41Supply and Fuixing of Water TIGHT Bulk Head fitting with Guard for incandescent lamp with 60 w Bulb S D No 80
42Supply and Run of 2 of 6 sqmm ( 84 / 0.3 ) PVC insulated single core unsheathed Copper Conductor of 1100 v Grade in 25 mm dia G I suitable pipe b class suitably bended both ends with necessery angle iron upright and end support For Mains ( S D N o 69 )
43Supply and Fuixing of Water TIGHT Bulk Head fitting with Guard for incandescent lamp with 60 w Bulb S D No 80
44Supply and fixing of 1200 mm ( 48\\" ) A C Ceiling Fan complete with stepped eloctronic 300 w regulator with 1.00 meter down Rod on the existing clamp S D N o 103
45Provision for Metre Board
46Provision for EB Deposit charges
47Providing Sanitary arrangements
48Providing Water supply arrangements
49Provision for Lock and Key
50Providing Rain water Structure
51Provision for Name Board
52GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58382964
AUTHORITY Local Bodies
TENDER VALUE 55 Lakhs
LAST DATE 18-11-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Construction Of Community Hall Type 1 @ Sanrorpalayam In Cuddalore O.T Panchayat
Basic Detail
Tender No A2/4794/2026
Bidding Type Tender
Location
City Cuddalore
State Tamil Nadu
Key Dates
Publish Date 05 Nov 2026
Submission Date 18 Nov 2026
Open Date 18 Nov 2026
Finance
Tender Value 55 Lakhs
Tender Fee Ref. Documents
EMD 55000
Exemption Not Available
Document List
b8882d0e-2cbb-4dba-a2d7-878f5cfe2f08.html
BOQ_866553.xls
Doc13.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 18, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

b8882d0e-2cbb-4dba-a2d7-878f5cfe2f08.html

xls

BOQ_866553.xls

pdf

Doc13.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender