Tender For Constuction Of Anganwadi Building (Using Autoclaved Cellular Aerated Concrete Blocks) @ Natham Panchayat
Tender Value
20 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
10 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuddalore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Constuction Of Anganwadi Building (Using Autoclaved Cellular Aerated Concrete Blocks) @ Natham Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation. |
| 2 | Filling with river M-Sand including cost and coveyance of all materials to work site and all labour charges etc. |
| 3 | Providing US Gravel packing for side berm including all charges etc complete including cost and coveyance of all materials to work site and all labour charges etc. |
| 4 | Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc. |
| 5 | Cement Concrete 1:2:4 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc. |
| 6 | Construction using AUTOCLAVED CELLULAR AERATED CONCRETE BLOCKS of size 600 x 200 x 225 mm using self curing AAC mortar @ 7.5 kg/sqm including the cost of all materials & labour charges, scaffolding etc - as directed by the departmental officers. |
| 7 | RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.Up to Basement |
| 8 | RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.Up to Above Basement |
| 9 | Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. |
| 10 | Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. |
| 11 | Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete. |
| 12 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 13 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 14 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three P.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 15 | Plastering with cement mortar 1:4mix to 20 mm thick includingcost and conveyance of all materials to site and all labour |
| 16 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. |
| 17 | Paving the floor with Vertified tiles of size 600x600x8mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Msand) base mortar over the existing floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3Kg./sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 18 | Dadooing the sides of walls up to required height with est approved quality colour printed glazed tiles of size 150x150x6mm and set in CM 1:2 using 10 mm thick and pointing with same colour cement of 4 kg including cost and conveyance of all materials to |
| 19 | Towards the cost of steel door of size 0.90mx2.10 m including all charges etc. |
| 20 | Towards the cost of steel door of size 0.75mx1.20 m including all charges etc. |
| 21 | Towards the cost of steel Window of size 1.20mx1.30 m including all charges etc. |
| 22 | RC Jolly |
| 23 | Steel Ventilator |
| 24 | Light point |
| 25 | Tube Light fitting |
| 26 | Fan point |
| 27 | Plug point |
| 28 | CFL lamp |
| 29 | DPI swtich of 500 V |
| 30 | G I Pipe |
| 31 | Service Wire |
| 32 | Distembering using two coats of Distember from approved company including cost and conveyance of all materials to site and all labour charges etc complete for 10 sqm(Inner) |
| 33 | Painting two coats Emulsion paint over cement plastered wall including cost and conveyance of all materials to site and all labour charges etc complete |
| 34 | Supplying and painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIMER) |
| 35 | Special design art work with first class quality Emulsion paint including cost and conveyance and all labour charges etc., |
| 36 | Supply and fixing of 75mm x 50mm hollow Squre tube |
| 37 | Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 33mm span, whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free, high performance rigid polyurethane foam (PUF) onforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specification. |
| 38 | Towards the cost and supply of Indian type water closet including etc . |
| 39 | Towards the cost and supply of Europien type water closet including etc . |
| 40 | Towards the cost and supply of Cuddapah slab for Shelf including etc complete. |
| 41 | Provision for RWH and Soakpit arrangements Rcc precast rings to |
| 42 | Provision for Rcc precast Cover slab Soak Pit arrangements |
| 43 | Provision for PVC Pipe 110mm Dia for septic tank |
| 44 | Cost and Supply , Instalation of Caterpillar Tunnel with climbing frame and including all labour charges etc complete |
| 45 | Cost and Supply , Instalation of Colour form mat and including all labour charges etc complete |
| 46 | Cost and Supply , Instalation of Baby swing and including all labour charges etc complete |
| 47 | Provision for 500 Liters Syntex tank and water supply arrangements |
| 48 | Earth work excavation and depositing on bank with initial lead and lift in all clauses of soil, including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for 10 cum. |
| 49 | Providing M Sand filling, including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete |
| 50 | Providing PCC 1:4:8mix, using 40mm HBG Metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete |
| 51 | Supply and errection of centering and shuttering for sides and sofits, including cost & conveyance and all labour charges etc., complete. |
| 52 | Providing CC 1:2:4mix, using 20mm HBG Metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete |
| 53 | Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) . |
| 54 | Providing and Laying of Interlocking Concrete (Surface Textured) Block Pavements having thickness 60mm and compacted over a thin bedding M.Sand layer of 25 mm thickness and joints shall be filled by fine M.Sand of specified grading as per table 1500.6 of Specification of Rural roads-2014 and Technical specification clause 1504. |
| 55 | Provision for Name board |
| 56 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender