Drinking Water Supply and Sanitation Local Bodies Closing in 6 days TDR #58382894

Tender For Renovation Works To The City Engineer Room @ Corporation Main Office In Ward No 82, Central Zone Coimbatore Corporation. Roc No.3236/2026/Md5

Issued by Local Bodies · Coimbatore, Tamil Nadu
Tender Value
19.40 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
6 days left
EMD
19400
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Renovation Works To The City Engineer Room @ Corporation Main Office In Ward No 82, Central Zone Coimbatore Corporation. Roc No.3236/2026/Md5

BOQ

Name of Work:- Renovation works to the City Engineer Room @ corporation main office in ward no 82, Central zone Coimbatore Corporation. ROC No.3236/2026/MD5
Sl. No. Item Description
1Dismantling and removing the existing damaged Doors , windows and gates including all cost etc complete.
2Dismantling and removing the existing damaged Floor and wall tiles including all cost etc complete.
3Dismantling and removing the existing damaged brick work in cm etc complete
4Scrapping and Removing the damaged and pealed out cement plaster on existing walls and ceiling including all cost etc complete.
5Plain Cement Concrete 1:2:4 (one cement two fine aggregates and four coarse aggregates) using 20mm size jelly including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
6Conveying the excavated earth from the site to the distance of 15kms out side of the city limit including all initial lead, lift, loading and unloading with transportation charges etc complete as per the direction of departmental officers.
7BRICK WORK in cement mortar 1:5 (one cement and five sand) using best quality of second class (Table molded chamber burnt ) bricks of size 9\\"x4 ½\\"x3\\" for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining the required elevation shall be done without extra cost.
8Supply and erecting centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC slabs, Rectangular beems, Tee (or) ECC Beam, Lintel, Bed Block, Staircase waist and landing slabs landing beams, canopy etc., in all floor with all cross bracings using mild steel sheets of size 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25mm X 25 X 3mm for boarding laid over country wood joinsts of size 10cm X 6.50 cm spaced at about 90cm C/C and supports by Causrina props of 10cm to 13cm dia spaced at 75cm C/C etc., completed as directed. Sl.No.123
9Supplying and fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening, cleaning,cutting,ending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in position and providing necessary cover blocks for all works as per detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts.
10Reinforced Cement Concrete M20 (Mix 1:1 1/2:3, one part of cement, one and half parts of sand , three parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications.
11Plastering for RCC exposed surfaces, such as sunshade, beam, Roof ceiling, plastering 1:3 to 10mm thick inclding all cost etc complete.
12Plastering with cement mortar 1:5(One part of cement, five parts of sand by volume) thickness 12 mm (average) for all internal/external surfaces etc., finished smoothly including curing etc., complete, at all leads and at all heights
13Supply and ingestion the anti termite chemicals to the infested areas using syringe as per the direction of departmental officers
14Daddoing the walls with ornamental design digital printing first quality approved Colour Glazed Elevation tiles with printed design of size 300X600X8 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete
15Flooring finishing with first quality Design Ceramic Tilesof all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete
16Floor Finish with Ornamental design double charged Digital Printing Floor tiles 60 X 60 cm of approved brand and colour in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification
17Paving the floor with Granite Slab(super fine polished withmachine cutedges) ofsizes1.2mx 0.60m and above of 18mm to 20mm thickness in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 25mm thick and white cement slurly layer of 3mm thick over this, laid insituand pointedwith whitecement neatlyand fixedin positionso asto makeperfectly smoothand shining to the alignment including cutting the marble slab to size with machine cutting polishing using different grade of corporandum stone, oxalic acid, tin oxide etc., and including hire charges or polishing machinery etc., complete
18Supply and fixing of Doors Using 32mm flush door,1mm laminate on either sides, First quality Teak wood trimmings, Brass Oxidized hinges, Tower bolt,Lock,Handle,Door stopper, with Door closer Teak wood surface is stained and finished in semi glossy melamine etc, complete as per standard specifications
19Supply of U-Pvc Casement Window at site by using with U-Pvc Profile JP 017 (58mm x 60mm 1.00 kg/m) for the outer frame .Total breadth is being divided equally in to two three or four openings (as per drawing).By using U-Pvc Profile JP 015 (78mm x 60mm 1.15 kg/m) for the shutters and the Mullion use U-Pvc Profile JP 019 (72mm x 60mm 1.20kg/m) and completed by fusion welding. All the shutters are fitted with 5mm clear glass with suitable U-Pvc glass bead. The windows are properly fitted with imported quality handles,SS 304 grade steel friction hings & Espengnett. use EPDM Material as gasket. All the profile are Reinforcement with 1.2mm GI Steel. Imported Anchor Fastners are being used to fix in the wall and fill with imported White sealant.
20Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
21Supply and providing false ceiling arrangements using 12.5 mm tk tapered edge Gypsm Board False ceiling confirming to IS 2095 including providing and fixing of frame work made up of special sections power pressed from MS Sheet and Galvanised Zinc Coating 600 micron as per IS 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm tk.with flanges of 12 mm and 37 mm providing and fixing at all height false ceiling of at 1200 mm c/c on flanges to the ceiling with dash fastener 12.5 mm dia x 40 mm long with 6 mm dia bolts to the hanger of 25 mm x 25 mm 5mm of required length and other end of angle hanger being fixed with nuts and bolts to G.I. Channels 45 mm x 15 mm x 0.90 mm running at the rate of 1200 mm c/c to which the ceiling section 0.5 mm tk. bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 at 450 mm c/c shall be fixed in a direction perpendicular to G.I Channel with connected clips made out of 2.64 mm dia x 230 mm long G.I.Wire at every junction including fixing the gypsm board with ceiling section and perimeter channels5 mm tk. 27 mm high having flanges of 20 mm and 30 mm long,theperimeter of ceiling fixed to wall /partitions with the help of rawl plugs at 450 mm c/c with 25 mm long drive -all screws at 230 mm intervals including jointing and fixing to a flush finish of tapered and square edges of the Gupsum Board with recommented filler,paper tapes,Finisher and twp coats of primer suitable for Gypsum Board as per manufactures specification and also including the cost of making openings for light fitting ,Grills Diffusers,cutouts made with frame of perimeter channels suitably fixed all complete as per drawings and specification and direction of th departmental officers .(excluding cost of paintnig)
22Providing Cornice Work for Gyp Board False Ceiling as per the direction of th departmental officers
23painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).
24Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete
25Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.
26Providing Interior design printed vinyl sheet will be sticked over the walls and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern vinyl paper and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete
27Supply of approved brand sanitary fittings and accessories including all cost etc complete
28waste coupling
29Angle valve
30single lever basin mixer tap
31100mm round shape Shower
321/2\\" chrome finish long neck pillar cock
33300x190mm bottle trap
34Urinal waste coupling
35health fauset
36Supply and fixing of European water closet(one piece closet) with P trap and slim duraplast seat cover of size 645*355*675 mm with fittings and brackets dismantling and redoing the masonry work completely including all cost and conveyance etc complete
37Supply and fixing of counter wash basin (round) of 44cm dia including cost of frames and fitting,dismantling and redoing the masonry work completely including all cost and conveyance etc complete
38Supply and clamping of 4 x 6 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
39Supply and run of 4of 2.50 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable flexible conduit pipe on wall and ceiling with continuous earthwire connectin of 14SWGTC wire with painting painting of suitable colour
40Supply and run of 3 of 4 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable flexible conduit pipe on wall and ceiling with continuous earthwire connectin of 14SWGTC wire with painting painting of suitable colour
41Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40 A 4 pole MCB isolater as in coming and 12 Nos . 6A to 32 ASP MCB as out going in flush with wall and making good of the concealed portion with earth connection.The MCB DB and MCB's should be with the ISI mark (like standard make)
42Supply, installation and termination of Data points and LNA cabling and other required CAT6 UTP cables and Optical fiber cables along with accessories as per instruction of departmental officers including all cost etc complete.
43Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessorie in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A switch with continous earth wire connection of SWGTC wire for making good of the concealed portion with suitable colour for PVC Concealed light/Fan Point (For electronic regulator) (5 Points per coil)
44Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unsheathed single core unsheathed copper Conductorcable of 1100V grade in suitableheavy gauge MS conduit pipeon wall and celling with M.S accessories inflush with wall with 150mm x 100mm x 75mm MS swithbox with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS plug with continuos earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point.
45Wiring with 2x4 sqmm (56/3.0) PVC insulated SC unsheathed cu. Conductor cable of 1100V grade in suitable heavy gauge MS conduit piped on wall and celling with M.S accessories inflush with wall with 150mm x 100mm x 75mm MS switch boxconcealed type with 3mm thick hylum sheet cover for 15A 3pin non interlocking CS plug with continuos earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point.
46Supply and Fixing of 24W LED Surface Panel light fittings with Led bulb of ISI 7made with standard specification including all cost etc; complete
47Supply and Fixing of 18 watts LED Surface Panel light fittings with Led bulb of ISI made with standard specification including all cost etc; complete
48Supply and Fixing of 6 watts LED Panel light fittings with Led bulb of ISI made with standard specification including all cost etc; complete
49Supply & Installation of 1.5 TR Split Type AC Unit Inverter with Copper coil(AIR-CONDITIONER ) and All accessories etc, complete as per standard specifications
50Supply and Fixing of Stabilizer for 1.5 Tonne Air Conditioner of approved brand including cost of material with installation charge etc
51Supply and fixing of 230mm (9\\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall including all cost etc complete.
52Supply and fixing of Wall Mounted Air Circulator - Wall 24\\" Fan with Double ball-bearing 900 oscillation Sturdy close-mesh guard beautifull design and Powerful heavy-duty motor . etc, complete as per standard specifications
53Painting the Wall Two Coats with approved colour Emulsion paint two coats over One Coat of primer over Cement Plastered Wall surfaces etc., complete complying with standard specifications and as directed by the departmental officers. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58382894
AUTHORITY Local Bodies
TENDER VALUE 19.40 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Municipal Adminitration And Water Supply Department
Work Description Tender for Renovation Works To The City Engineer Room @ Corporation Main Office In Ward No 82, Central Zone Coimbatore Corporation. Roc No.3236/2026/Md5
Basic Detail
Tender No e85/2026
Bidding Type Tender
Location
City Coimbatore
State Tamil Nadu
Key Dates
Publish Date 04 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value 19.40 Lakhs
Tender Fee Ref. Documents
EMD 19400
Exemption Not Available
Document List
a6d54251-ad1c-4f6a-9149-c954ed7a48fd.html
BOQ_866850.xls
ITB.pdf
TenderDocument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

a6d54251-ad1c-4f6a-9149-c954ed7a48fd.html

xls

BOQ_866850.xls

pdf

ITB.pdf

pdf

TenderDocument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender