Tender For Name Of Work : Construction Of Anganwadi Building In Keerapalayam Panchayat Using Interlocking Concrete Block At Keerapalayam Block
Tender Value
20 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
1 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuddalore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Name Of Work : Construction Of Anganwadi Building In Keerapalayam Panchayat Using Interlocking Concrete Block At Keerapalayam Block
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well rammed and consolidated and depositing the surplus earth in all places shown by the departmental officers with inital leads and lifts, etc. Including leveling the sites complete complying with standard specifications and as directed. In sand or other loose soil, wet sand not under water, silt, light black cotton soil, sandy loams and ordinary soil. TNBP SS NO 20B 23 & 24 |
| 2 | Supplying and filling in foundation and basement with M.Sand in layers not more than 15cm thick well rammed, watered and compacted complete complying jwith standard specification. TNBP SS NO 24 & 25 |
| 3 | Cement concrete 1:4:8 mix (one cement five sand and ten hard broken stone) using 40mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Completeas per specification and as direceted TNBP SS NO. 28Cement concrete 1:4:8 mix (one cement five sand and ten hard broken stone) using 40mm ISSHBG metal for foundation, flooring and rendering the top rough to take floor finish including watering wherever necessary and laid in layers not more than 15cm thick compacting etc. Completeas per specification and as direceted TNBP SS NO. 28 |
| 4 | Supply and fabrication of steel including cost and conveyance of steels to worksite including labour for cutting, jointing and welding if necessary including all labour charges for dying with binding wire etc., complete. |
| 5 | Reinforced Cement concrete 1:1.5:3 mix using 20mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc., complete. Upto basement |
| 6 | Reinforced Cement concrete 1:1.5:3 mix using 20mm ISSHBG metal from approved sources including cost and conveyance of all materials to work site and all labour charges for mixing, laying, and watering etc., complete. Upto basement |
| 7 | Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.AUpto Basement. |
| 8 | Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.Above Basement. |
| 9 | Providing US Gravel packing for side berm including all charges etc complete including cost and coveyance of all materials to work site and all labour charges etc. |
| 10 | Cement Concrete 1:2:4 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc. |
| 11 | Interlocking brick masonary wrok Cm (0.30x0.23x0.125) including cost and conveyanceof all materials to work site and all labour charges etc. |
| 12 | Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. |
| 13 | Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 14 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three P.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 15 | Plastering with Cement Mortar 1:4 (One Cement and Three P.Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 16 | Towards the cost of steel door of size 0.90mx2.10 m including all charges etc. |
| 17 | Towards the cost of steel door of size 0.75mx1.20 m including all charges etc. |
| 18 | Towards the cost of steel Window of size 1.20mx1.30 m including all charges etc. |
| 19 | Towards cost and fixing of RCC Jolly of size 0.90x0.45m including cost and conveyance and labour for fixing etc |
| 20 | Light point |
| 21 | Tube Light fitting |
| 22 | Fan point |
| 23 | Plug point |
| 24 | CFL lamp |
| 25 | DPI swtich of 500 V |
| 26 | G I Pipe |
| 27 | Service Wire |
| 28 | Supplying Steel Ventilator of size 0.60m x 0.45m as per standard specification. |
| 29 | Towards the cost and supply of Indian type water closet including etc . |
| 30 | Towards the cost and supply of Europien type water closet including etc . |
| 31 | Towards the cost and supply of Cuddapah slab for Shelf including etc complete. |
| 32 | Provision for Rcc precast rings to Soak pit arrangements |
| 33 | Provision for Rcc precast slab Soak Pit arrangements |
| 34 | Provision for PVC Pipe 110mm Dia for septic tank |
| 35 | Provision for Tamil Brass Letters 25 cm |
| 36 | Provision for Tamil Brass Letters 20 cm |
| 37 | Provision for Tamil Brass Letters 15 cm |
| 38 | Provision for Syntex tank and water supply arrangements |
| 39 | Rain water Harvesting Sub Estimate110 mm Pvc pipe |
| 40 | 110 mm Pvc bend |
| 41 | Rcc rings-900mm dia |
| 42 | Rcc slab-900 mm dia |
| 43 | Earthwork |
| 44 | Filling 40 mm metal |
| 45 | Filling 20 mm metal |
| 46 | Labour charges |
| 47 | Paver Block Arrangement Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation. |
| 48 | Supplying and M.Sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification. |
| 49 | Cement concrete 1 : 4 : 8 mix using 40mm metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed |
| 50 | Supplying & Erecting centering for sides & soffits including necessary supports etc., complete complying with standard specifications and as directed by the departmental officers |
| 51 | Cement concrete 1:3:6 mix Using 20 mm ISS HBG metal inculding cost and conveyance of all materails to site including all labour charges completed. |
| 52 | Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) . |
| 53 | Providing and Laying of Interlocking Concrete (Surface Textured) Block Pavements having thickness 60mm and compacted over a thin bedding M sand layer of 25 mm thickness and joints shall be filled by fine M sand of specified grading as per table 1500.6 of Specification of Rural roads-2014 and Technical specification clause 1504. |
| 54 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. |
| 55 | Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 56 | Dadooing walls with following best approved quality,colour printed glazed150*150*6mm in CM 1:2Using 10mm thick |
| 57 | Distempering using Two coats of Distember from Approved Company including cost and conveyencence including all charges |
| 58 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 59 | Bala Painting |
| 60 | Providing and applying Emulsion paint finish of approved make & shade in two coats over a coat of approved primer and 2 coats of patty to give an even shade as per manufacturer's instruction to the internal plastered surfaces including preparation of surfaces, scaffolding etc. all complete as per drawings and specification for all heights. |
| 61 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender