Tender For Development Of Rural Circuit - Malanad Malabar Cruise Tourism Project In Kerala Under Swadesh Darshan Scheme - Mangroove Cruise- Construction Of Minor Boat Terminal At Muttil In Cherukunnu Panchayath In Kannur District-Balance Work.
Tender Value
18.75 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
6 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kannur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Rural Circuit - Malanad Malabar Cruise Tourism Project In Kerala Under Swadesh Darshan Scheme - Mangroove Cruise- Construction Of Minor Boat Terminal At Muttil In Cherukunnu Panchayath In Kannur District-Balance Work.
BOQ
| Sl. No. | Item Description |
| 1 | App. A - Boat Terminal- Superstructure |
| 2 | 5.3:Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). |
| 3 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 4 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 5 | 5.23:Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (cement : 3 fine sand) |
| 6 | 11.20.3:Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Dark shade pigment using ordinary cement |
| 7 | od33884/2018_2019/IA: Stone work in plain ashlar in super structure upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade:(as per 7.12.1 of DSR) One face dressed Black Granite stone block |
| 8 | od33885/2018_2019/IA:Providing Granite stone post , 10x10 cm size, 100 cm long hand cut and chisel dressed accurately to line and level for hand rails on walkway fixed bottom and top in RCC beams per Architect's design including the cost of materials , labour charges, conveyance etc. complete but excluding the cost of RCC beams which is to be paid seperately ( specification as per 7.12.1.1 of DSR )- Granite post 4 side dressed One face dressed Red sand stone |
| 9 | od39332/2018_2019/IA:Providing & fixing on roof, First class superior quality Mangalore Pattern tile of approved size and as per approved pattern on wooden reepering work including cost of materials, conveyane charges and labour charges etc. complete(Based on 12.48) |
| 10 | od39333/2018_2019/IA:Providing & laying on roof First class superior quality Mangalore Pattern ridge tile of approved pattern and make on wooden reepering work complete including cost of materials, conveyance and all labour charges for fixing. |
| 11 | 50.9.1.2 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) using good quality Pincoda wood |
| 12 | od39264/2018_2019/IA:Supplying and fixing Pingoda wood reapers of size 50x25 mm with Stainless steel wire nails including cost and conveyance of materials etc. complete.(Based on 50.9.14.2) |
| 13 | 13.50.1 : Applying priming coat:With ready mixed pink or Grey primer of approved and manufacture on wood work (hard and soft wood) |
| 14 | 13.62.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 15 | od39266/2018_2019/IA : Providing & fixing on First quality ceiling flat clay tile of approved size and as per approved pattern on wooden reepering frame work including cost and conveyance of complete.(Based on 12.48) |
| 16 | 9.1.2 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood |
| 17 | 13.67.1:Varnishing with varnish of approved brand and manufacture :Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish |
| 18 | 13.46.1 :Finishing walls with Acrylic Smooth exterior pIaint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 19 | od33886/2018-2019/1A- :Deepenning the river by earth work in excavation by mehanical means (hydraulic excavator mounted on barge ) over areas (exceeding 30cm in depth , 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth , all leads and lift at places pointed out by the engineer - in -charge and disposed earth to be leveled and neatly dressed . all kinds of soil |
| 20 | 2.6.1: Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil |
| 21 | 60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all material labour charges etc. complete as per direction of Departmental officers at site |
| 22 | 60.64.1 : Coconut Pile - Supplying and stacking well matured straight coconut post for driving down throug various strata bellow bed level including cost coveyance labour charges etc complete |
| 23 | 60.64.4:Coconut Pile - Driving down coconut pile to lines and levels through variuos strata including all hire charges and labour for fixing , staging platform and all other appliances necessary for pile driving down after pointing the bottom end |
| 24 | od33887/2018_2019/IA:Supplying and paving 50 mm thick rough granite slab hand cut and chisel dressed well on top for paving in floor of walkway laid over 20 mm thick cement mortar 1:4 with cement slurry as per the design of Architect (as per 11.23 of DSR 2016) |
| 25 | od33888/2018_2019/IA:Supplying and fixing old tyre on the fender post to resist the impact of stopping boat (OBSERVED DATA) |
| 26 | od33889/2018_2019/IA:Providing Cast Iron Bollards with approved drawings and design including cost of all materials, moulding charges , cost of fixtures and all labor charges etc. complete. |
| 27 | od6507/2019_2020/IA:Providing Granite stone post , 10x10 cm size, 100 cm long hand cut and chisel dressed accurately to line and level for hand rails on walkway fixed bottom and top in RCC beams per Architect's design including the cost of materials , labour charges, conveyance etc. complete but excluding the cost of RCC beams which is to be paid seperately ( specification as per 7.12.1.1 of DSR )- Granite post 4 side dressed One face dressed Red sand stone |
| 28 | Extra item |
| 29 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 30 | 25.7. Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc.including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screenprinciple as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape inmetalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Alumini um sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts,bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. |
| 31 | 10.28 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 32 | 16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 33 | od43708/2020_2021/IA: Supply,conveyance,installation,testing and commissioning of 30w integrated Solar LED light fitting with all accessories .Each unit should include5V,60W panel with Grade A solar cells ,70ah,3.2V LiFePO4 type battery,Luminaire housing component to be Aluminium alloy with powder paint,IP65,LED chip shall be Philips /Osram, THD <10%,efficiency greater than 85%,3800-4500 luminance ,etc as required with 5 years warranty Luminaire shall be suitable for mounting at a height of 5-6 meter ,should have 24 hoursautonomy ,PIR sensor or better efficient lighting (Certifications:MNRE/IEC/BIS/LM80/ROHS/IP65) |
| 34 | 4.1.A.2: Construction of granular sub-base by providing graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (MORTH data) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender